How do I customize my Harley Davidson seat?
1:083:04How to Make a Custom Motorcycle Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then glued to the seat the foam is shaped using a custom-made grinder to match the riderMoreAnd then glued to the seat the foam is shaped using a custom-made grinder to match the rider specifications. At this point Don stops. And has his customers test the seat to ensure the right fit.
How do I make my Harley passenger seat more comfortable?
How to Make Your Motorcycle Seat More ComfortableGet a Seat Pad. One of the most popular ways you could fix it is to get a seat pad. ... Buy Padded Shorts. Instead of buying any padded seat cover, you could buy padded shorts instead. ... Take Breaks. ... Invest in Some Butt Powder. ... Replace the Seat.
How do you lift the seat on a Harley?
0:170:56How to take the seat out of my Sportster - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd a lock mechanism to hold it on there. So all you have to do is take a quarter or a knife andMoreAnd a lock mechanism to hold it on there. So all you have to do is take a quarter or a knife and unscrew the back bolts lift that push four Center it and pop it right off.
What is a 2 up Harley seat?
Two-up seats are motorcycle seats meant for both motorcycle rider and passenger, and can also provide a good base for strapping your bags to even when riding solo.
How do I upgrade my motorcycle seat?
1:437:33Fix any uncomfortable Motorcycle seat yourself for Cheap! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo foam and this is just a gel inserting motorcycle seat gel insert. Now you can get these from.MoreSo foam and this is just a gel inserting motorcycle seat gel insert. Now you can get these from.
Why are motorcycle seats so uncomfortable?
Another reason why so many motorcycle seats are uncomfortable is their poor design and stiff padding. Furthermore, comfort also depends on the seat cover. Unlike vinyl, leather doesn't stretch, which makes for a harder surface. Let's face it, just like in all other cases, you get what you pay for.
How do you remove Harley touring seats?
0:293:57Seat Removal & Battery Check - Touring Motorcycles - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to loosen the screw. Keep your finger on the screw and push it down into the seat tabMoreYou're going to loosen the screw. Keep your finger on the screw and push it down into the seat tab as you remove the seat being cautious of the paint on the tour pack.
How do I remove my Harley tour pack?
4:137:43How To Remove the Tour Pack on a HARLEY DAVIDSON 14+ - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we can remove the bags and of course if you have any latch lights or anything on the bags any bagMoreSo we can remove the bags and of course if you have any latch lights or anything on the bags any bag lights we need to disconnect those and then we can just remove. These two bolts on each. Side.
How do you remove battery from Harley without alarm?
1:1911:56CHANGING THE BATTERY OUT OF YOUR HARLEY DAVIDSON, with a ...YouTubeStart of suggested clipEnd of suggested clipThe main fuse will take and disconnect the system. So if the alarm system will be inactivated. So weMoreThe main fuse will take and disconnect the system. So if the alarm system will be inactivated. So we can actually pull the battery out put the new battery in without it going beep beep beep beep.
What do you call two people on a motorcycle?
A passenger in this seat is said to "ride pillion" or may themselves be referred to as a "pillion". Or you can say 'pillion rider' as in these news articles.
What it called when you ride on the back of a motorcycle?
Pillion: A passenger riding on the back seat of a motorcycle. A motorcycle's rear passenger seat is called the pillion seat.
Can two people ride a Harley-Davidson?
Some models are extremely well-suited for carrying two people; other models less so. But if they're adequately prepared and equipped, any Harley-Davidson® motorcycle can be used to carry a passenger.
What type of foam should I use for a saddle?
Be sure your upholsterer uses quality high-density foam on the bottom of the saddle (be prepared to pay accordingly) and a thin layer of quality soft foam on the top. The high-density foam will keep your body in the correct riding position, and the soft foam will provide comfort. A quality, high-density foam is crucial for a comfortable seat.
How wide should a cruiser saddle be?
A cruiser saddle should be a minimum of 12.5 inches wide at the back. Nafzger points to an old metal tractor seat and explains the ideal saddle shape. "The back of the saddle should be fairly wide and it should be curved, like the shape of a pan, or that old tractor seat," Nafzger explains.
How many saddles does a cruiser have?
And remember, most cruisers are equipped with two saddles, one for the rider and one for the passenger. If you have both done, the cost is potentially doubled, but appearance and comfort will be your reward. It’s a simple matter to improve the seat’s looks by stitching a pattern on the top of the saddle cover.
What does a saddle look like?
Many saddles are shaped either like a "U" or a bubble, allowing the rider to slide back and forth on the seat. "It's important to comfortably stay in position. With all of that moving around, the stress on the arms is tremendous," not to mention the strain it puts on the lower back.
Where is Nafzger's saddle made?
Nafzger has been producing custom motorcycle saddles for 27 years. He crafted his first saddle in his native Switzerland for his 1967 Moto Morini 125. Friends began asking for his handiwork, and Nafzger’s name soon became synonymous with high-quality, functional custom saddles in his native area.
Can you use the original seat pan on a saddle?
As long as no major modifications have been made to the frame of your machine, and regardless what end result is desired for your finished saddle, the original seat pan can probably be used. “It’s easy to move a rider ahead or back a couple of inches, and to lower or raise them the same amount,” Nafzger reports.
What tools do I need to build a stock seat?
You will need some basic tools: a good screwdriver, a heavy-duty staple gun, 100-grit sandpaper and hacksaw blades.
How to cut seat cover on a Ford F150?
Step 2: peeling back the seat cover . Step 3: measuring foam. Step 4: marking the cut line. Step 5, position the seat for cutting. Step 6: begin cutting slightly above the line, working the blade lightly back and forth. Step 7: continue cutting slowly. Do not apply excessive pressure; allow the blade to do the cutting.
What blades cut seat foam?
A note on the blades: Any good blade will cut seat foam, but the best are medium-coarse pitch (18 teeth per inch) made from fully hardened material. These blades are more rigid than bimetal blades that have a hardened cutting edge mated to a flexible body, and make the work easier.
What is the number for a saddleman?
Try Sargent Cycle saddles (800/ 749-7328, www.sargentcycle.com) for custom work or Mustang (800/243-1392, www.mustangseats.com ), Corbin (800/538-7035, www.corbin.com ), or Saddlemen (800/397-7709, www.saddlemen.com) for some off-the-rack alternatives. Step 2: peeling back the seat cover.
Can you cut down a motorcycle saddle?
If you'd rather cut down your motorcycle's saddle than buy a new one , here are the details on the procedure. Sometimes the simplest approach is best. If your bike is (or merely feels) too tall, you can shorten the suspension or go straight to the source and slice precious inseam-snatching inches from the saddle.
