On one component, create a sketch to use for the cut. Project the edges you want to extrude. Click Stop Sketch. Choose Create > Extrude. For Operation, choose Cut.
How to make a stock model in Fusion 360?
1 Model the stock body using the solid modeling tools in Fusion 360. 2 Create a CAM Setup in the Manufacture workspace. 3 In the Stock tab, select From Solid as the Mode. 4 Select the Stock body for the Stock Solid field. The model body is now selected as the stock for this setup.
How to trim a body in Fusion 360?
Follow these steps to trim a body in Fusion 360. From the Solid menu select Modify > Split body. Select Body to Split. Select Body to use as the splitting tool. Select OK to create the split.
What is a cam stock in Fusion 360?
Either solid or mesh bodies can be defined as CAM stock in Fusion 360. Model the stock body using the solid modeling tools in Fusion 360. Create a CAM Setup in the Manufacture workspace.
How to enable mesh preview in Fusion 360?
Ah I think I know why that is. Can you click your name in the top-right corner of Fusion and select Preferences. Under the Preview tab, you will need to enable the Mesh preview. Then, these two options should appear.
How do you cut lines in Fusion 360?
0:002:10How To Break Lines in Fusion 360 (Dividing A Line) - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to talk about how to break and divide lines in fusion 360. So that's easier to edit themMoreWe're going to talk about how to break and divide lines in fusion 360. So that's easier to edit them. And easier to make. Changes. Hey tyler back with tekken espresso.
How do you remove sketch lines in Fusion 360?
1:042:02The Trick To Removing Sketch Constraints in Fusion 360 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe sketch geometry constraints. I'm going to box select everything hit delete on the keyboard. ItMoreThe sketch geometry constraints. I'm going to box select everything hit delete on the keyboard. It removes all my constraints.
How do you cut sketches in Fusion 360?
1:426:22How to Trim Sketch Geometry in Fusion 360 - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp until the point at which it intersects other sketch geometry. If the red preview looks correctMoreUp until the point at which it intersects other sketch geometry. If the red preview looks correct then all you have to do is click once on the geometry. And it will be trimmed away.
How do you cut a component from a body in Fusion 360?
3:526:47Fusion 360 - How to Cut One Body From Another - YouTubeYouTubeStart of suggested clipEnd of suggested clipTool from the create menu so I'll go to create down to revolve. And I'm gonna select the bottom halfMoreTool from the create menu so I'll go to create down to revolve. And I'm gonna select the bottom half of that circle. Because that's the only part I need and then and this dialog box for my accidents.
How do you remove unwanted lines in AutoCAD?
To resolve the issue, try out the following: Disable Smooth Line Display. On the command line in AutoCAD, type LINESMOOTHING and set it to Off or 0 (zero).
How do I delete a line in Autodesk?
Removing Unwanted Lines from your Autodesk Inventor SketchGo to sketch tab.Select Trim.Click on the lines that you want to remove.
How do you laser cut a sketch?
0:082:08One Line Drawing on Laser Cut Acrylic | School Art Project - YouTubeYouTubeStart of suggested clipEnd of suggested clipMany continuous line drawings can stand on their own as finished works of art we begin by simplyMoreMany continuous line drawings can stand on their own as finished works of art we begin by simply drawing out our design with a sharpie marker on a white piece of. Paper.
How do you unlock a sketch?
Tip: You can also lock and unlock the sketch plane by pressing the F3 key when you are in any command that supports sketch plane locking.
What do blue lines mean in Fusion 360?
Note: Notice that the lines on the arc are blue, where as all the other lines are black. This is because a black line means it has been fully defined whereas a blue line means it has not. 14) Go to “SKETCH” then “Arc” and select the “3-Point Arc” tool.
How do I edit a constraint in Fusion 360?
Click the dimension and set its value. Delete a constraint: click Show Constraints, and then click to select the geometry. On the active constraint box, right-click the constraint, and click Delete. Add a constraint: click the appropriate constraint command, and then click the geometry to constrain.
Why can I extrude a sketch in Fusion 360?
To solve this problem, enable "Show Profile" as follows: Right-click on the affected sketch within the timeline or the browser tree. Select Edit sketch. Activate "Show Profile" and save the change.
Issue
How to set a particular shape/model to use as stock in Fusion 360 CAM. You may want to use an existing CAD model as reference for the stock.
Solution
Either solid or mesh bodies can be defined as CAM stock in Fusion 360.
To insert a mesh body as stock in Fusion 360
Insert the mesh model to Fusion 360 using the instructions at this link: How to insert a mesh body into Fusion 360
