What is Kerdi board used for?
Schluter®-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used for creating bonded waterproofing assemblies with tile coverings.
Can I discontinue or alter the terms of my Kerdi-board?
We reserve the right to discontinue or alter these terms at any time. Kerdi-Board is a multi-functional tile substrate and building panel that can be used for creating bonded waterproofing assemblies with tile coverings.
What is the thickness of a Kerdi board?
Use of KERDI-BOARD on wood or metal framing. Minimum board thickness = 1/2" (12.5 mm) for studs spaced at 16" (40.6 cm) o.c.; 3/4" (19 mm) for studs spaced at 24" (61.0 cm) o.c. 1. KERDI-BOARD can be mounted vertically or horizontally on wood or metal framing with screws and corresponding KERDI-BOARD-ZT washers.
What is Schluter Kerdi board?
Schluter ® -KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used in bonded waterproofing assemblies with tile. KERDI-BOARD allows you to quickly and easily build tile-ready elements in showers, bathtub surrounds and platforms, countertops, vanities, shelving, and more! specific product you want to buy.
Is there a shortage of Schluter Kerdi board?
We are dealing with a raw material shortage as a result of COVID, and we are unable to source part of the materials required for our Kerdi-Board production.
Where can I buy Kerdi board online?
Amazon.com: Kerdi Board.
Can you mix Kerdi board and cement board?
Yes,Kerdi can be installed on drywall or cement board. However if installed on drywall it is only protecting one side. The back side of the drywall fails and it is just as bad or worse than if it had an issue on the tile side.
What is Kerdi board made of?
It consists of an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thin-set mortar. KERDI-BOARD can be used in a multitude of interior applications.
Which is better wedi vs Schluter?
The Wedi materials are less forgiving and fixes for mistakes in your cuts are not recommended. The Schluter system is more forgiving since you can use the Kerdi band, mortar, offcuts and Kerdi fix to.
Can you tile over KERDI-BOARD?
For most installations of KERDI-BOARD, tile can be installed right away. Exceptions include curved wall areas and non-bearing partition wall systems. In these applications, the tiles can be installed once the bonding materials have cured sufficiently to stabilize the KERDI-BOARD assembly.
What can I use instead of a Kerdi board?
Profoil is a cheaper alternative to Schluter Kerdi without sacrificing quality. It's applied the same as Kerdi with both in and out corners available.
Is Schluter Kerdi worth it?
Great product. It takes a little longer than the traditional mud shower bed and water-proofing methods, but it is worth it. Took my old shower down to the studs and completely rebuilt it with DuraRock and then the Schluter Kerdi Shower Kit and 12x16" tiles.
Do you need drywall behind Kerdi board?
Yes! In fact, it's advised to use this product on drywall in your bathroom before laying tile and other materials. Without a waterproof membrane like Kerdi, water and moisture can seep through grout, tile and other materials and end up damaging wood studs and subfloor.
Can you use both sides of KERDI-BOARD?
No, the KERDI membrane does not have a front/back to it. One side of the membrane features printed gridlines for assistance with cutting. The membrane may be installed grid side out for convenience in tile setting as well.
What is the best backer board for showers?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Do you need to waterproof KERDI-BOARD?
Now that the KERDI-BOARD is installed you have to waterproof all the seams. And the way to do that is to use KERDI-BAND on every seam and screw. This is important: use unmodified thin-set to embed the KERDI-BAND.
What is a kerdi board?
Available in eight different thicknesses, KERDI-BOARD building panels allow you to create a broad range of tile-ready substrates and building elements that are flat, level, plumb, and square. KERDI-BOARD is waterproof and temperature-resistant, lightweight and easy to handle, and quick and easy to install. If you can dream it, you can build it with KERDI-BOARD.
What is a schluter kedi board?
Schluter®-KERDI-BOARD-SB is a lightweight, waterproof, prefabricated shower bench made of KERDI-BOARD that is designed to integrate with the Schluter®-Shower System.
Where do I run a kerdi band?
Mark it out on the wall where your tile will end, then run your Kerdi or Kerdi band just short of or to your line so you cover that seam where the transition is.
Where do you place studs for kerdiboard?
If you are reframing, make sure to place a stud where your Kerdiboard ends and the drywall begins so you have an anchor point for both materials.....
Can you use kerdi board on drywall?
2- Regular white drywall will work just fine but the local sales rep and Schluter stock holders will be very happy if you use kerdi board everywhere.
Product Overview
Kerdi-Board is a multifunctional tile substrate and building panel that can be used for creating bonded waterproofing assemblies with tile coverings. Kerdi-Board is made from an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thinset mortar.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
