Stock FAQs

why does stock s2000 stereo say tape if there is no tape player

by Taryn Grady Published 2 years ago Updated 2 years ago

Why won't my Cassette tapes play?

NOTE: C120 and C180 cassette tapes may not play properly. C60 and C90 are recommended. Depending on the location of your unit, the tape heads may have condensation on them. Open up the tape door, unplug the unit and let the unit sit for approximately one hour to dry up any moisture. Then plug the unit back in and try the unit once more.

Are the stock stereos in the S2000 any good?

The S2000's stock stereos were a base AM/FM/CD with 4 speakers or a later AM/FM/CD with 8 speakers. They're not awful under normal, everyday driving conditions, but you don't drive a car like the S2000 the same way you drive a Fit – you drop the top, find a two-lane, and enjoy yourself.

How do you fix a tape player that won't play?

Reinsert the tape into the cassette compartment on the player. Attempt to play, fast-forward, or rewind the tape. Remove the tape from the cassette compartment. Clean the tape player head and drive mechanism. Use a dry cotton swab to clean the surface of the pinch roller, play/recording head and erase-head

What should I do if my tape recorder is not working?

Open up the tape door, unplug the unit and let the unit sit for approximately one hour to dry up any moisture. Then plug the unit back in and try the unit once more. If the issue is still unresolved, service may be required.

How fucked am I?

So I'm a new grad that's been looking for a job since June 2020, it's been pretty rough and I haven't managed to get a job. Fast forward to a couple of weeks ago, I'm talking to my aunt and she says she knows someone who might be able to help.

Tesla internship interview

Hey folks, After many efforts, I finally have a tesla interview coming up in a week for an internship. It's 30 minutes and with the production test engineering team. The requirements only states proficient with at least one of python, C and golang (preferred) and agile development. I have used python a lot, and c++ a fair bit.

Need help in choosing courses

I am planning to enter IIT Bombay ( The best engineering college in India ) for my masters in VLSI. I am planning to take these courses,

What are the best practices for setting up Cadence Virtuoso model libraries?

I'm tasked with setting up simulation model files including model groups and corners for Cadence Virtuoso. The caveat is that the designers want to jump back and forth between model versions.

How to turn on a tape monitor?

Press the Tape button. If the sound continues, you have just engaged your tape loop. You have a tape monitor.

How to loop a CD recorder?

Disconnect your CD recorder. Instead, run a RCA cable from Tape Out to Tape In. This will form a loop.

How to use EQ on FM?

While listening to FM in the normal manner, depress the "tape" button. If sound disappears, then you will not be able to use the EQ through the tape inputs/outputs. If the sound continues to be heard, it is a true "loop" and you can absolutely connect the EQ in the manner described above.

What does a CD output?

CD's OUTPUTS to the LINE IN of the EQ, then from the LINE OUT of the EQ to the AMP.

Is a tape circuit a monitor?

Your Tape circuit is a tape monitor. Just because it doesn't say "monitor' on the front panel doesn't mean it's not a tape monitor loop. That's the way these things have worked for decades. I would be shocked if your Onkyo was any different.

Does EQ work with tape loop?

It will work with an EQ that has a built-in tape loop feature. It will degrade the sound quality of the recordings however. It will also likely reduce the quality of the main system output unless you have some severe speaker and or room limitations. Even then, it will add some noise and phase issues to an otherwise flat system. It is better to look at replacing the weakest link component with a superior sounding component than to add accessories like an EQ. In other words, cure the problem directly rather than to cover it with bandaids and make-up.

Do EQ receivers have tape in/out?

To that I will add that many receivers have tape in/out, but lack the required "tape monitor" function. Having one does not mean you get the other. You would need both.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9