What makes the TBS crossfire so special?
With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link. Remote control links, however, are tasked with much more than range.
What is the difference between the micro TX and Crossfire TX?
For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother.
How do I set up RSSI and LQ for TBS crossfire?
When you enter LUA scripts for TBS Crossfire, you can choose between the TX and RX. In the RX menu there are a lot of options but the main thing you want to focus on is setting up an RSSI or LQ channel. Scroll down until you reach channel map settings and choose a channel you want to use as an RSSI or LQ indicator.
What is the best Tx antenna for TBS crossfire?
TBS crossfire modules come with their stock TX antenna which is good enough for your standard flying and doesn’t need upgrading at all, but there are also other options like the Diamond TX antenna which is a slightly directional antenna that provides better penetration through objects and is more durable.
What transmitter works with TBS CROSSFIRE?
It's an external RF module that can be installed directly on the back of a radio transmitter (i.e. JR module bay). Rather than the typical 2.4GHz that is used in most RC systems, the Crossfire operates at the 900MHz band....Crossfire TX Modules.TBS Crossfire TX ModuleTBS Crossfire Micro TX V2AmazonGetFPV | Amazon2 more rows
How far does TBS CROSSFIRE work?
The Crossfire module boiled down to its pure essence for long range up to 40km, and FPV racers that need ultra low latency.
What is TBS CROSSFIRE micro TX V2?
The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension.
How do I update crossfire receiver?
The update can be done with the steps below:Hold the “bind” button.Power up the receiver. The led starts to flash rapidly.Release the button. for about 1-2 seconds.Push and hold the button again. The green led starts to flash in a double-pattern. ... Wait till the update is finished. ... Now the receiver is ready to bind.
Is Elrs better than Crossfire?
The goal is to give you a better and more consistent signal with lower latency and longer range. ELRS is open source and less expensive than other options like TBS Crossfire or Frsky R9. In short, it is cheaper and better than the competition.
Does crossfire have telemetry?
The TBS CROSSFIRE (XF) system is an R/C link system made for FPV enthusiasts. It features unheard-of range without sacrificing basic functionality such as being immune to interference from onboard equipment, low latency control, or two-way communications including telemetry functionality.
How do I bind a crossfire receiver?
On the standard transmitter, enter the configuration menu by pressing and holding the joystick for 3 seconds, select “General” and “Binding” - a message “Binding” will start blinking, waiting for the receiver. On the micro transmitter, a short press on the button will initiate binding mode.
What is TBS WIFI?
The Team Blacksheep Cloud connects a number of TBS products using WIFI. You can now make almost all settings via screen or LUA script for all those connected devices. New features like TBS Fusion Goggle Modules will follow the VTX channel have also been introduced.
How do I wire a crossfire Nano?
Turn on your TX16s and PRESS AND HOLD the "SYS" button. Then navigate to "Q1 Crossfire Configuration", then choose the module you have installed on your radio. Once you enter the menu on your radio choose "Bind", now power your drone on. (Be sure to remove all propellers).
How do I update crossfire micro TX?
2:404:51TBS Crossfire Micro TX Firmware Update 4.02 - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich um your crossfire scripts. And then say and select micro tx it will then said it wants toMoreWhich um your crossfire scripts. And then say and select micro tx it will then said it wants to update and what i did i had to push the return button at the enter button at the same.
Does TBS tracer work with Crossfire?
TBS Tracer runs the Crossfire & CRSF engine, with a new 2.4GHz twist.
What frequency is TBS Crossfire?
TBS CROSSFIRE supports two different frequency bands which are 868mHz and 915mHz.. It operates on 868 MHz in ITU-1 (Europe), and on 915MHz (rest of the world).
What is a TBS crossfire?
The TBS CROSSFIRE is a long range R/C link based on the newest RF technology , capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.
Does TBS crossfire require pilots?
With the TBS CROSSFIRE comes peace of mind. But don't take our word for it. All leading drone racing organizers require pilots to fly the TBS Crossfire. All top drone racers fly the TBS Crossfire. The furthest long range missions are flown with TBS Crossfire.
What is a TBS crossfire?
The TBS CROSSFIRE is a long range R/C link based on the newest RF technology , capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.
What is CRSF protocol?
CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!).
Does TBS crossfire require pilots?
With the TBS CROSSFIRE comes peace of mind. But don't take our word for it. All leading drone racing organizers require pilots to fly the TBS Crossfire. All top drone racers fly the TBS Crossfire. The furthest long range missions are flown with TBS Crossfire.
How much power does a Micro TX have?
Micro TX supports power up to 250 mW and a range of around 10 km. All of freestyle and race flying is usually no more than 1 km or so in which case the Micro TX is more than enough.
How to protect antenna from heat shrink?
Once you’ve soldered the wires to your receiver, connect the antenna to it, and at this point , you can cover it all with heat shrink so it’s more protected. Make sure to leave a hole for the bind button. You can cut the hole, carefully, with an X-Acto knife after you shrunk the heat shrink.
What is the most reliable FPV radio link?
TBS Crossfire is currently the most reliable long-range FPV radio link. It is an external module that can be installed in the JR bay of your radio controller. This long-range system isn’t only used by long-range pilots but also by those who always want to have a stable connection and those who do not want to worry about getting failsafes in risky ...
Is a TBS crossfire antenna good?
TBS crossfire modules come with their stock TX antenna which is good enough for your standard flying and doesn’t need upgrading at all, but there are also other options like the Diamond TX antenna which is a slightly directional antenna that provides better penetration through objects and is more durable.
Is TBS Crossfire reliable?
TBS Crossfire is currently the most reliable long-range and close-range radio system. The Micro TX is more than enough for FPV unless you want to go further than 10km and you really want to have that screen on the back.
TBS Crossfire Micro Receiver V2
A super-tiny, super-lightweight UHF long range receiver. Perfect match for your mini- or micro-quads.
TBS Crossfire Micro Receiver V2
A super-tiny, super-lightweight UHF long range receiver. Perfect match for your mini- or micro-quads as well as 4ch aircraft. It now comes with a servo-adapter board for high-current servos and 4ch PWM connectivity (requires software update to your Crossfire TX!)