What Cricut tools do I need to make a cardstock project?
Tools Needed – Cardstock Project. For this project, you will need the following: Cardstock in the color of your choice – glitter gold would be great! Cricut 12 x 12 cutting mat (I used the strong grip mat) Cricut Explore Air or similar machine. Scraper (the basic tool set has everything you need) Cricut Writing Pens in choice of color.
What is the best cardstock for cutting?
The best cardstock for cutting is less fibrous than most and does not contain any coatings that have a plastic base. When test cutting papers you will notice some that just do not cut cleanly and there are generally two main problems that occur with your cuts.
What can you cut with a Cricut blade?
The Deep Point blade is recommended for cutting magnet, chipboard, stamp material, thick cardstock, stiffened felt, foam sheets, cardboard, fabric, and other thicker materials. The Cricut Scoring Tip with Housing can be used to create score lines rather than cutting.
What sets the Cricut explore apart from other die cutting machines?
Cricut Explore Scoring Stylus – the fact that you can cut and score your projects at the same time really sets the Cricut Explore above other die cutting machines. Get this tool.
What tool do I need to cut cardstock on Cricut?
Deep Point bladeThe Deep Point blade is recommended for cutting magnet, chipboard, stamp material, thick cardstock, stiffened felt, foam sheets, cardboard, fabric, and other thicker materials.
How do you cut cardstock on Cricut?
Design and CutCustomize your design.Select Glitter Cardstock from the list of materials. If using a Cricut Explore machine, turn Smart Set dial to Custom.Place Glitter Cardstock onto LightGrip cutting mat.Load mat into the machine.Press Go.Remove cut design from cutting mat and add to your project.
What tools do I need to make cards on Cricut?
2:3731:26How To Make a Cricut Card For Beginners - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you don't have access to a bone folder you can use like a butter knife or a credit card orMoreIf you don't have access to a bone folder you can use like a butter knife or a credit card or anything that's sort of stiff that will help you just get a good crisp.
How do you use Cricut on cardstock?
6:367:36How to Write with your Cricut Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's going to have the writing and be on this card and then it will cut the square card out. So whenMoreIt's going to have the writing and be on this card and then it will cut the square card out. So when you go to continue. It's gonna find my machine again real quick.
Why won't my Cricut cut all the way through cardstock?
Ensure you are using a Cricut brand blade. Inspect the blade and blade housing and remove any debris that may be stuck to the blade or lodged in the blade housing. Once clean, perform a test cut. If the blade and housing are already free from debris, or cleaning it did not help, proceed to step 3.
Which is the fine point blade for Cricut?
The Premium Fine-Point Blade (formerly known as the German Carbide Premium Blade) can be used with the Maker, Explore, Explore One, Explore Air, and Explore Air 2 machines. Use it with the Premium Fine-Point Blade Housing.
How do you make a cut out card on the Cricut maker?
1:5614:06How to Make Cards with ANY Cricut Machine (Joy, Explore, Maker)YouTubeStart of suggested clipEnd of suggested clipSo we'll load that in it does come with the machine. And you'll just set that in and close the clampMoreSo we'll load that in it does come with the machine. And you'll just set that in and close the clamp. They are different than your maker and explore pens. And then we'll load this under the rollers.
How do you cut paper with Cricut?
0:453:38How to use a cricut paper cutter - YouTubeYouTubeStart of suggested clipEnd of suggested clipPower buttons over there Cricut machine will turn on again this mat is a little bit sticky so thatMorePower buttons over there Cricut machine will turn on again this mat is a little bit sticky so that the paper will stick on there when the cutter is cutting it I'm align my paper up on the grid. Lied
Why is my Cricut Joy ripping my cardstock?
If your Cricut Maker or Cricut Explore machine is tearing or dragging through the material, check the following: Make sure that you have selected the correct material setting in Design Space or that the Smart Set Dial is on the correct setting.
How do you cut cardstock?
0:000:56Cardstock Quick Tip: Cutting & Scoring - YouTubeYouTubeStart of suggested clipEnd of suggested clipMy light one here is my scoring blade make. Make sure you're not using your cutting blade and put itMoreMy light one here is my scoring blade make. Make sure you're not using your cutting blade and put it on here and go ahead and score your cardstock.
Can you use regular cardstock with Cricut?
Your Cricut machine can cut a wide variety of different types and weights of paper and cardstock. This includes very delicate papers like crepe paper and vellum and heavier paper like cardstock and Kraft board. In general, you will be able to cut any of these papers using a LightGrip mat and a Fine Point blade.
How do you use the pen tool on Cricut?
6:199:03Learn How to Use Your Pen Feature & Writing fonts! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe tools we're gonna load our our pen. And we want to make sure our blade is in there so I'llMoreThe tools we're gonna load our our pen. And we want to make sure our blade is in there so I'll switch over to the camera. Alright so now that our machine is ready to go I'm going to take my pen. So I'
What paper settings are available on the Cricut Explore?
Cricut Explore. On Cricut Explore, there are several paper settings on your dial, including paper, light cardstock, cardstock, and poster board. You’re may to have to play around with the settings a bit to get it right—remember to do a test cut before you cut your project.
What mat should I use for cardstock?
Generally, use the blue LightGrip mat for most paper and cardstock. I find that the adhesive on the blue mat is the best at releasing paper materials. Heavier cardstock might need the green StandardGrip mat, but I almost always start with a LightGrip mat.
How to find material settings on Cricut Maker?
For Cricut Maker, material settings appear as a series of boxes on the Make Screen. If you see your material there, simply click on the box to select the setting. Click Browse All Materials to access the entire list of material settings.
How to change font on Cricut?
To change the font, you need to click on your text box, then select the edit tab on the right side of design space. TIP: If you will be using the Cricut Writing Pens, select fonts that have a writing style and only those will come up as your options. These are the fonts that work best with the pens. Pin.
What is a good practice to always have at least one spare blade on hand?
Pin. An Extra Blade – It is good practice to always have at least one spare blade on hand. You never know when something is going to happen – and probably right in the middle of a project! A premium blade is optimal as it lasts longer than the regular blade.
Can you write and cut on a Cricut Explore Air?
The great thing about the Cricut Explore Air is that you can write and cut at the same time (or cut and score)! You don’t need to change out your blade for a pen or vice versa. The tools needed for a Cricut are simple when you can do it all in one!
What kinds of paper and cardstock can you cut with Cricut?
Your Cricut machine can cut a wide variety of different types and weights of paper and cardstock. This includes very delicate papers like crepe paper and vellum and heavier paper like cardstock and Kraft board. In general, you will be able to cut any of these papers using a LightGrip mat and a Fine Point blade.
How to get the best results when cutting paper products with Cricut
Be sure to check the recommended settings and always do a test cut when working with new materials to ensure that the settings are correct for your particular machine. An older blade or cutting mat can make a difference in how well the material holds to the mat and cuts through.
What cutting mats to use
As previously stated, most of the time, you’ll want to use the LightGrip cutting mat with paper products. With heavier and thicker paper materials, you may need to use the StandardGrip mat to hold them in place. Try your LightGrip mat first and then move up to the StandardGrip if needed.
What blades to use
For most projects, the Fine Point blade will work well. On occasion, for some thicker materials, you may get better results with the Deep Point blade. With some of the more delicate materials like crepe paper, many people find that using the Rotary Blade or Wavy Edge tool gets better results.
How to remove your material from the cutting mat
As we recommend with all Cricut projects, we highly recommend that you turn the mat upside down and gently bending it, peel it away from the material you have cut. In this way, you can keep your paper materials flat and prevent curling.
Writing and drawing with your Cricut
With your Cricut pens, you can write and draw with your Cricut, adding another element to your paper and cardstock projects. In fact, you can even address an envelope or write inside a greeting card with your machine.
What is a premium carbide blade?
Formerly known as the Premium German Carbide blade. Recommended for use with paper, cardstock, poster board, vinyl, iron-on, and other thin to medium weight materials. Premium Fine-Point blades are gold in color. Use with gold Premium Fine-Point Housing or silver Fine-Point Housing.
Can you use the Cricut Explore to score?
The Scoring Stylus lets you use your Cricut Explore machine to score fold lines for cards and envelopes, boxes, 3D projects, and more. Cricut Explore holds the Scoring Stylus and a cutting blade at the same time, so you can cut and score in one step—without changing mats! Also compatible with Cricut Maker. Roll Holder.
Is a cricut safe for food?
Blade and blade housings for the Cricut Cake and Cricut Cake Mini machines were manufactured to be safe for use with food items. Cricut Cake blades were sold with silicone blade housing protectors which protected the blade housing from food particles that might otherwise work their way up inside the blade housing.
