What size tire is on a 2005 Road King?
Motorcycle Insurance:IdentificationFront Tire (Full Spec)Dunlop MT90B16 72HRear Tire (Full Spec)Dunlop MU85B16 77HBrakes:Front Brake TypeDual Disc27 more rows
What size rear tire is on a Road King?
180/65-B16The tyre size of Harley Davidson Road King is 130/80-B17 Rear :-180/65-B16....Dimensions Specifications of Harley Davidson Road King.Seat height :705 mmLength :2450 mmDry Weight :362 kgFuel Capacity :22.7 LitersGround Clearance :135 mm3 more rows
When did Harley change the Road King frame?
2009In 2009 they all got a major upgrade with a new frame and tweaked suspension. One such bike bestowed with this is the all-time favourite Road King.
How many cc's is the Road King?
1745 ccHarley Davidson Road King is powered by 1745 cc engine. This Road King engine generates a torque of 150 Nm @ 3250 rpm.
What size is a MU85B16 tire?
25 x 25 x 5 inchesEnhance your purchaseSizeMU85B-16Load Index Rating77.00Rim Size16 InchesSpeed RatingYItem Dimensions LxWxH25 x 25 x 5 inches1 more row
What size rear tire is on an 02 Road King?
Dunlop D402 Rear Tire 74H MT90B16 Single White 3018-91 Harley Davidson 45006847 (Fits: 2002 Harley-Davidson Road King)
What are the best years for the Road King?
The 10 Best Harley Davidson Road King Models Money Can Buy1994 Harley-Davidson Road King. The Road King came out in 1993 as a 1994 model year. ... 1996 Harley-Davidson Road King. ... 1999 Harley-Davidson Road King. ... 2000 Harley-Davidson Road King. ... 2001 Harley-Davidson Road King Classic. ... 2002 My Harley-Davidson Road King Classic.
Is a Road King a touring bike?
The Road King is part of Harley's touring line of motorcycles. This range includes Road Glide, Street Glide, and Electra Glide models. These large-framed touring or FL Series of motorcycles are usually termed as 'dressers' or 'baggers'.
Is a Road King good for touring?
The Road King is the best handling of the touring models with a light front end, the most clearance and a precise feel. The taut chassis and good clearance allow it to be thrown around much more than you would expect of a 362+kg monster.
What size motor does a 2005 Road King have?
Air cooled, 1450cc, 45° V-twin, OHVEngine and transmission Switch unitEngine type:2 cylinders, 4-stroke, 45° V-twinDisplacement:1450 cc (88.6 cubic inches)Bore × stroke:3.75 inch × 4 inch (undersquare - longstroke)Cooling system:Air cooled36 more rows
What does FLHR mean on a Road King?
FLHR. Harley-Davidson Road King motorcycle model. Copyright 1988-2018 AcronymFinder.com, All rights reserved.
What's the difference in a Road King and a Road King special?
7:5723:182021 Harley-Davidson Road King (FLHR) VS Road King Special ...YouTubeStart of suggested clipEnd of suggested clipThen the road king is the right answer for you if you're looking for a little bit sleeker moreMoreThen the road king is the right answer for you if you're looking for a little bit sleeker more modern custom bagger looking bike then the special is best for you.
What are the nice things about Harley brake lines?
The nice thing about the steel brake lines is that they come in a chrome finish, which adds to the look of your bike. If you want to improve the looks of your Harley while increasing your brake feel and performance, steel brake lines are the way to go.
What are aftermarket brakes?
The aftermarket offers a wide variety of brake parts from manufacturers such as Performance Machine, Brembo, EBC and others. You can start out with aftermarket pads with a much better initial bite, steel lines for better feel at the brake lever, and fresh high temperature DOT 4 fluid, and move up to larger diameter, full floating, drilled rotors with 6-piston discs that clamp with enough force to stop a train. Unlike a lot of upgrades, brakes look good, as well as very practical, and have no real downside.
How to get rid of spongy brakes?
To improve the braking response and eliminate that spongy feel, consider replacing your original rubber brake lines with braided hoses. The stock hoses flex when applying the brakes, whereas the braided lines don’t balloon and the pressure goes directly to the brake calipers.
Do Harley brakes look good?
Unlike a lot of upgrades, brakes look good, as well as very practical, and have no real downside. A lot of Harley riders like the bling and shine of chrome and fancy items that are functional as well as enhance the bike's appearance.
Do Harley Touring bikes have front disc brakes?
All of the recent Harley Touring bikes come from the factory with front and rear disc brakes. They are pretty good in stock condition, but there is certainly room for improvement. Better pads, bigger discs, and calipers with larger pads and more clamping force are all available. So, instead of doing a simple brake overhaul, consider an upgrade.
What to use to smooth out bike wheel bearings?
Before installing the new wheel bearings, be sure the wheel hub is clean and free of any burrs. Emery cloth or a piece of medium grit sandpaper can be used to smooth out any rough surfaces. Also, ensure you have the correct bearings for your model of bike, as motorcycles fitted with anti-lock brake systems (ABS) use different bearings than those that are not equipped with ABS.
What pipe is used to drive a bearing into a wheel?
If a bearing installation tool is unavailable, a socket/PVC pipe with the same size outside diameter as the outer race of the bearing and a hammer can be used to drive the bearing into the wheel.
How to replace a wheel bearing?
Step 1 – Lift bike and remove wheel (s) The first step in replacing a set of wheel bearings is to lift and support the bike to allow for wheel removal. With the bike supported, remove the wheel (s) that are in need of new bearings. Figure 1. Bike supported on lift.
Can you replace worn wheel bearings in garage?
With proper tools, worn wheel bearings can be quickly replaced in your garage.
Do bike wheel bearings need to be replaced?
Wheel bearings are robust and generally last many thousands of miles; however, at some point in a bike's lifespan, they will need replacing. Wheel bearings are typically made of chrome-hardened steel and are sealed, non-serviceable units. While the lubricant applied from the factory is meant to last the life of the bearing, ...
How far should the oil level be on a road king?
It should be 5.6 in from top of tube on all models except Road King, and 5.24 in from top of tube on Road Kings. Adjust as necessary. Fork oil level gauge can be used to easily measure and adjust oil level. Install fork spring into tube with tighter wound springs at the bottom.
When did Harley Touring use air forks?
Harley Touring bikes have used the same basic front forks since the 1980's , all of them based upon the first Duo-Glide forks in the 1960's. It's a simple thing to remove for service, or for an upgrade. This article applies to the non-air forks, but air forks are similar.
How to remove brake calipers from rotors?
Remove brake caliper mounting screws and slide both brake calipers off rotors. Support the calipers on the front crash bar with wire or cord. Push a large screwdriver through the hole in the right side of the axle and remove the axle nut as well as washer. Loosen the two nuts at the bottom of the right side fork slider.
Where is the pinch bolt on a bike?
For older bikes, spray glass cleaner or WD-40 on fork tube above the rubber fork stop. After lubricating surfaces, move fork stop up fork tube until it contacts bottom of upper fork triple tree.
Is Harley Davidson Touring comfortable?
The Harley Davidson Touring is one of the most comfortable bikes on the market, but sometimes, comfort isn't as much fun. If you're a fan of ape hanger handlebars, then you're a true biker. Ape hangers give you that stretched out feel, with the wind in your face and your arms held high.
Do ape hangers change the ride?
These apes are high enough to give you a flavor of the ape hanger world, but not too high that it will change the ride comfort and stability. These ape hangers are easier to install than anything bigger, because most of the time the brake and clutch lines are long enough, so you don't have to change them.
Step 1 – Lift Bike and Remove Wheel
Step 2 – Remove Old Wheel Bearings
- A Harley Davidson wheel bearing removal/installer tool (part #94134-09A or HD-44060) or blind bearing puller is necessary to remove the wheel bearings from the wheel. 1. Remove the axles and spacers from the wheel. If working on the rear wheel, separate the sprocket assembly from the wheel and set aside. The brake discs do not have to be removed. 1...
Step 3 – Install New Wheel Bearings
- Before installing the new wheel bearings, be sure the wheel hub is clean and free of any burrs. Emery cloth or a piece of medium grit sandpaper can be used to smooth out any rough surfaces. Also, ensure you have the correct bearings for your model of bike, as motorcycles fitted with anti-lock brake systems (ABS) use different bearings than those that are not equipped with ABS. 1. P…
Step 4 – Reinstall Wheel
- After the bearings have been installed, rotate the inner race of each bearing to ensure smooth operation. If the bearings check out okay, proceed with reinstalling the wheel(s).
Related Discussions