In ’95/’96 Hamer produced a limited number of Korina Standards, versions of the original Gibson Explorer of ’58. These featured “korina” bodies with unbound rosewood fingerboards, dot inlays, covered humbuckers, and black pickguards. Korina is a term which is generally applied to a lightweight mahogany-like tonewood known as African Limba.
Full Answer
What kind of pickups do Hamer guitars use?
Also beginning in ’87 Hamer began using Seymour Duncan pickups. Most recent guitars feature Duncans, though the Diablo has DiMarzios, and, again, a customer may order any other type of pickup. Early Hamer 8-String and Standard Basses were fitted with DiMarzio X2N bass pickups, often with an active preamp.
What ever happened to Hamer USA guitars?
Well, we near the end of the long tale of Hamer USA Guitars, a saga that began in the early 1970s and is today a great success story in American guitardom. For this installment we bring the litany of Hamer guitars up to date… Not resting on its laurels, yet two more new Hamer models debuted in ’94 – the Eclipse and the Mirage.
Are all Hamer Hamers made in the USA?
From ’97 or so, all American-made models have Hamer USA logos. From ’90 to around ’96 Korean-made Hamers carried logos that read “Hamer Slammer Series,” with the Hamer block typeface, “Hamer” big, “Slammer Series” underneath.
What happened to Hamer models?
In ’99, Hamer continued its juggernaut with the introduction of a flurry of new semi-hollow Artist models in celebration of the company’s 25th anniversary. Actually, this is misleading because, as we’ve documented, the company really began in ’73 and kind of evolved into existence over the next couple of years.
What pickup does Hamer use?
Hamer replaced the JB with a '59 bridge pickup in the Studio. They do use the Custom in some of their other guitars. I don't personally love PRS pickups so I really can't offer you any replacement advice
Is the Seth Lover 59 a good pickup?
Steve,#N#The 59 is basically a paf style pickup, the Seth Lover model is a touch more authentic. I think both sound very good for stock pickups, if you want to get better from there you'l have to go boutique, IMO#N#ArnieZ
What pickups did the 88 Hamer use?
From ’86 to ’88 some came with German OBL pickups, including HB types. Beginning in around ’88 Hamer basses increasingly used EMG pickups, which began replacing Hamer Slammers. Some recent basses use Seymour Duncans. Again, any kind of pickup may have been ordered by the original customer.
When was the Hamer Standard discontinued?
These remain in the line today. Standard Revisited. The Hamer Standard, the upscale Explorer copy that started it all back in ’74, was discontinued in ’85. However, in the new “vintage” environment of the ’90s, the model was revived in ’95.
What is a Hamer Artist Ultimate?
Around the time of the move Hamer introduced another variation on its semi-hollow Artist guitar, a top-of-the-line Hamer Artist Ultimate (ARTULT). This was a spectacular guitar, substantially the same as the carved-top Artist but with some extra-fancy features.
What year was the guitar number 8 0196 made?
Numbers were stamped on the guitars, either in ink or black paint, or in yellow on dark instruments. Guitar #8 0196 would be from 1978 and was the 196th guitar numbered that way. Guitar #8 21416 was made in 1988 and was the 21,416th guitar so numbered.
When was the guitar #8 21416 made?
Guitar #8 21416 was made in 1988 and was the 21,416th guitar so numbered. Beginning in late 1987 serial numbers were again stamped into the wood. Many one-of-a-kind and prototype instruments have numbers that do not relate to either of the two numbering systems. Slammer by Hamer.
What is the new model BCRS?
The new version (Model BCRS) was redesigned to have a much more rounded form, much closer to a Fender bass design, just slightly more exaggerated waists. The upper horn remained extended, but was much thicker. The body was now made of alder, and the maple neck was bolted on, with the four-in-line headstock.
Abaco
Interests:Bad golf. Loud rock. Fishing. My beautiful wife and baby son.
serial
Interests:Great loud rock and roll, feedback, Hamer Instruments, my kids, Corvettes, shooting, the beach and Natty Boh.
Brooks
i like duncan phatcats in the neck and rio grandes or phatcats in the bridge.
Travis
Interests:Doctor of Chiropractic, father, husband, lover of beer, whiskey, strength training and guitars.
BadgerDave
Interests:Interests: MotoGP, gin, tequila, Green Bay Packers football, vintage and sport touring motorcycles, mid century sci-fi and creature movies, guitar and amplifier mods.
Jeff R
My '03 PRS Singlecut is the same construction recipe as a Studio Custom and I am absolutely in love with the stock PRS "#7" buckers that came in it.
BadgerDave
Interests:Interests: MotoGP, gin, tequila, Green Bay Packers football, vintage and sport touring motorcycles, mid century sci-fi and creature movies, guitar and amplifier mods.
Who is the founder of Hamer Guitars?
6078. Hamer was started when Jol Dantzig and Paul Hamer, partners in Northern Prairie Music in the early 1970s, moved from repairing old guitars to making new, improved versions of their “dream” vintage guitars. Their idea was to make inexpensive options for those into expensive vintage guitars, though they were greeted like high-end boutique.
Who ran the Hamer factory?
Paul Hamer continued to handle sales, doing a lot of global traveling. Dantzig and Untermeyer ran the factory, with Dantzig focusing on marketing issues and product development, Untermeyer handling international affairs and the business aspects. Hamer continued to garner support from many top professionals.
Why was Miller interested in Hamer?
According to Dantzig, Hamer was interested in the program because it provided access to young artists who might promote Hamer guitars.
What pickups did the Scarab II have?
Two guitars were offered, the Scarab II, with two Slammer pickups, three-way select and volume and midrange contour tone control, and the Scarab I, the same but with only a bridge humbucker. The Scarab Bass was the same shape as the guitar, with P and J-type pickups.
Who was Billy Idol's guitarist?
Fusing the rather disparate image posturings of New Wave and Heavy Metal was the early ’80s band that backed singer Billy Idol. Idol’s guitarist, Steve Stevens, caught the attention of the guitar world and in ’84 he hooked up with Hamer to create the Prototype SS.
Was Hamer on a roll in the 80s?
Clearly, Hamer was on a roll in the mid ’80s. But the times they were a-changin’ again. Arguably, the ’70s, were dominated by a Gibson taste, reflected in the Standard, Sunburst, and Special. As discussed, the rage for heavy metal hit in ’83 and Hamer responded with guitars like the Scarab and the Vector.