CMP M1 Garand stock treated with BLO Linseed Oil Linseed oil, also known as flaxseed oil or flax oil, is a colourless to yellowish oil obtained from the dried, ripened seeds of the flax plant. The oil is obtained by pressing, sometimes followed by solvent extraction. Linseed oil is a drying oil, meaning it can polymerize into a solid form. Owi…Linseed oil
What kind of oil do you use on your M1's?
Clear shellac (2 coats max) for inside the barrel channel, action, etc to stabilize/ seal the action and stock, Oil finish the rest of the stock. Check the CMP M1 manual. Section 5.2.7 recommends Linseed Oil.
What finish was used on the M1A1 rifle?
The M1 Rifle was originally manufactured with one of two finishes: linseed oil or China/Tung oil. Towards the end of WWII the linseed oil was supplanted by Tung Oil, a finish which was used, I believe, during '50's production. Refinished stocks were, however, generally refinished with linseed oil.
How do you clean a new M1 Garand?
How to Treat a New M1 Garand or M1 Carbine Stock from the CMP. Do an oil scrub. Turpentine or Mineral Spirits 50/50 with Boiled Linseed Oil or Raw Linseed Oil and lightly scrubbed in with a #000 or finer buffing scratchy (or steel wool). Wipe dry about 25+/- minutes later and repeat once or twice.
What kind of oil do you use on your gunstock?
Clear shellac (2 coats max) for inside the barrel channel, action, etc to stabilize/ seal the action and stock, Oil finish the rest of the stock. Check the CMP M1 manual. Section 5.2.7 recommends Linseed Oil. I’ve used Linseed Oil on numerous gunstock and furniture projects. Two cautions, though.
See more
What oil does Garand stock use?
As to the M1 Garand Rifle, it is believed that the original manufacturer's finish utilized boiled linseed oil into which the stocks were dipped and then dried. Subsequently, what might be called boiled tung oil was used instead.
What kind of oil do you use for rifle stock?
Tru-Oil® Gun Stock Finish has been the professional's choice for gun stock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age.
Which is better boiled linseed oil or tung oil?
Boiled linseed oil cures faster than tung oil, overnight in a warm room when all the excess is wiped off, as opposed to two or three days for tung oil. (Raw linseed oil cures much slower – weeks at a minimum – so raw linseed oil will remain sticky for a long time, even with the excess wiped off).
What's the difference between tung oil and linseed oil?
Here are some key differences between linseed oil and tung oil: Linseed oil carries a slight yellow tint, whereas tung oil dries to a clear finish. Tung oil creates a harder, more durable finish than linseed oil. Tung oil is more water-resistant than linseed oil.
What is the best oil to use on gun stocks?
For people who prefer to make their own finish for wooden gun stocks, boiled linseed oil is an excellent alternative or even the best alternative. It can be hand rubbed into wood to provide a durable, water-proof, and non-toxic finish. Boiled linseed oil is usually used on bare wood.
Is linseed oil good for gun stocks?
Boiled linseed oil is more often used on bare wood and is popular for finishing gun stocks, as the process of heating it decreases its drying time. When hand rubbed into wood, it creates a durable weatherproof seal and the heat produced from the friction of rubbing produces a deep, polished finish.
Which is better Danish oil or linseed oil?
Danish oil and Teak oil dry faster than linseed oil, which is traditionally used on willow cricket bats. The finish they provide is also much more resilient. If your wood already has linseed oil on it, it's best to carry on using it.
Do you need to sand between coats of linseed oil?
Applying Boiled Linseed Oil – The Final Coat The only difference in this coat is you don't sand after the final coat.
Should I sand between coats of tung oil?
Tung Oil Re-coating – Sanding Between Coats Typical dry times are between 2 and 7 days before re-coating. You can test to see if the surface is ready to be re-coated by doing a light sanding in a small area with a 400-600 grit sandpaper. If the sanding produces a fine white dust you are good to go.
Is Watco tung oil real tung oil?
This is real tung oil (as opposed to the Minwax product), and works as it should.
Is teak oil better than linseed oil?
Teak oil is best when used on dense woods and it can be exposed to the outdoors. It may change the wood's color a bit though. Tung oil is waterproof and non-toxic, but it takes a while to dry. Linseed oil brings out the colors of the wood and protects against humidity, but it scratches easily.
How many coats of tung oil should I use?
How many coats of tung oil should be used? While there are many advantages to using it, pure tung oil takes two to three days to harden, and needs at least five coats. Oil/varnish blends and wiping varnishes are faster-drying, more practical options, but such terms rarely appear on labels.
What oil is used in M1Garand stock?
M1Garand stock treated with Minwax tung oil. Or Mineral oil (also had multiple folks say NOT to use Mineral oil) China seed oil like they were originally done at the armory. That is what Springfield Armory used to treat the original stocks.
Is linseed oil a linseed based finish?
Linseed Oil, not a linseed based finish product but just plain oil. Re-apply annually. More important than boiled or unboiled is what has been added to it. Make sure it doesn’t have any synthetic sealants or polyurethane. Something like this, maybe: Winsor and Newton Oil Colour Cold Pressed Linseed Oil.
How to lubricate OP rod?
1 The op-rod catch can be lubricated where shown. This will reduce wear and help assist the bolt closing when a clip is inserted. 2 Apply some grease to the area shown on the bullet guide. This will reduce wear on the guide when it acts on the accelerator on the operatin rod catch.
Why are grease locations on military uniforms important?
The grease locations shown in the service manuals are designed to promote proper function.
Does lubricant have to be tested for corrosion?
While there are various lubricant bearing tests for corrosion, none measures a lubricant’s resistance to sea water. It is expected to combine corrosion and washout measurements in this test. The washout test is important for military applications.
Can you grease a rifle without stripping?
The rifle can be cleaned without field stripping and those areas where the grease was cleaned off in the process can be accessed without taking the rifle apart. 1 The first part we'll want to grease is the bolt. The bolt has several areas that need to be greased. These areas are broken down into two sections.
Does M1 use grease?
T he new M1 shooter is likely to use much more grease then required. When applying grease, realize that only a thin surface layer is required. If the grease is put on too thick it is just pushed aside and provides no utility to the rifle. Mobil 1 grease comes in a deep red color. We can use this to our advantage.
Is Lubriplate 130A still available?
Lubriplate 130A is still available today, but it isn't the only choice or even the best choice for a grease. Since the 1950's, synthetic greases are now available to the general public and are superior in performance to Lubriplate 130A. At GarandGear.com we only use Mobil 1 synthetic grease on our M1 Rifles.
How long does grease last in a gun?
If you use wet oil/cleaner you should clean every 7 days, a lube oil might last you 4 weeks but I wouldn't push it that long.
Why is oil important?
So, oil is pretty simple stuff. It acts as a slick barrier to protect metals against friction and protects against corrosion. A good oil does this well until it dries or break down.