In fact the stock H Pipe has a 3/8" - 1/2" baffle in it....even though it is a 2 1/2" pipe the opening is that small! It's really not an H pipe at all but a sound dampening device. X Pipes and true H pipes will add some HP and Tx but small and will make the sound more pleasant IMHO.
Full Answer
What kind of exhaust does a C-5 Corvette have?
Built entirely of T-304 stainless steel, Billy Boat Performance Exhaust Shorty Headers for the C-5 Corvette are direct replacement parts for the factory equipment. Billy Boat Performance Exhaust is the originator of the LS1 and LS6 shorty header.
Why choose C5 Corvette long tube headers?
Our C5 Corvette long tube headers will enhance your car’s performance and sound. Your Vette won’t only drive better, but you’ll love the audio output, too.
What are the best exhaust headers for a Z06 Corvette?
(For the 1997-2004 Corvette C5 including the Z06) If you are going to upgrade your exhaust system, start with headers from Bill Boat and work your way back. Billy Boat Long tube headers are designed for the performance minded Corvette enthusiast with power at the top of their list.
What kind of coating do you use on a C5 Corvette?
* Use Jet-Hot's polished aluminum-ceramic thermal barrier coating (interior and exterior surfaces) to keep heat in, exhaust velocity up, and under-hood temperatures down. * Are covered by our Performance Guarantee and Lifetime Limited Warranty. Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
Why use h pipe in exhaust?
1:064:53Exhaust H-Pipes vs. X-Pipes: What You Need to Know - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne factor that affects scavenging. Performance is the diameter of your exhaust pipes. You mightMoreOne factor that affects scavenging. Performance is the diameter of your exhaust pipes. You might think that putting larger diameter pipes in an exhaust system will always improve your car's.
What does ax pipe do for exhaust?
An X-Pipe or an exhaust H-Pipe are at the heart of a performance system and bolted in the center of the car. Also known as a crossover pipe, each system works by balancing the exhaust pulses from either side—or cylinder bank of a V-style engine. The result is a smooth exhaust flow and a more efficient engine.
How much HP does a stock C5 have?
345 @ 5600Lingenfelter Engineering Creates The First Modified C5 CorvetteStockLingenfelterDisplacement, ci/cc347/5680370/6100Horsepower, hp @ rpm345 @ 5600450 @ 6100Torque, lb-ft @ rpm350 @ 4400435 @ 4900Acceleration, mph9 more rows•Aug 2, 1997
Does C5 Corvette have resonators?
NO. There are NOT any resonators on any C5. The small cylinders just after the exhaust manifolds are pre or PUP CATS to help reduce cold start emissions.
Are all H pipes the same?
All h pipes are the same.
Do I need an H pipe?
Flowmaster® strongly recommends using a crossover tube, otherwise known as an H-pipe or balance pipe on all true dual exhaust systems. The crossover pipe equalizes the exhaust pulses and allows the sounds waves to communicate between both banks of the engine.
How fast will a stock C5 Corvette go?
Well, the advertised top speed is right at 172 mph for the coupe and slightly less for the FRC because of aerodynamics.
How much horsepower can a C5 Corvette handle?
While a fairly expensive addition to your car, the output of a C5 Corvette equipped with a supercharger can easily exceed 650-700 horsepower.
How fast is a stock C5 Corvette?
The 1997 debut C5 model set the starting point for 0-60 mph at 5 seconds flat, and the car got quicker each consecutive year after that: 4.9 seconds for 1998 models, 4.8 seconds for 1999 models, 4.3 seconds for 2001 models and an impressive 4.0 seconds for 2002 models.
What is a C5 Corvette?
The Chevrolet Corvette (C5) is the fifth generation of the Chevrolet Corvette sports car, produced by the Chevrolet division of General Motors for the 1997 through 2004 model years. Production variants include the high performance Z06.
Why does exhaust pipe flow out faster?
One reason is so that they flow out. of the exhaust pipe more quickly. It is matter of relative weight. The. cooler air is, the denser it is, and thus the heavier it is. In a. larger pipe, the gases have a longer chance to cool off. Theoretically, engine to push out a larger amount of relatively cooler, heavier air.
Does a larger exhaust system affect header tuning?
engine to push out a larger amount of relatively cooler, heavier air. Overly-large piping also affects header tuning. With the larger piping, exhaust pulses achieve a higher level of exhaust-gas entropy.
What is the H pipe on a C5 Corvette?
When Chevrolet introduced the C5 Corvette it installed a simple "H"-pipe balance tube. It was roughly two inches in diameter and provided adequate flow between the 2 1/2-inch catalytic converter pipes. For reasons unknown, a running change was made to the "H"-pipe sometime in model year '97.
Why do I need a custom tune for my Corvette?
A custom tune is recommended with any complete header package, as the air flow and exhaust flow changes can cause your Corvette engine to throw codes if not tuned. Tunes also help to unlock the total power and performance that your headers can offer , so they're a generally good idea with any heavily modded Corvette.
What is Billy Boat Performance Exhaust?
Billy Boat Performance Exhaust is the originator of the LS1 and LS6 shorty header.
What are Billy Boat shorty headers?
Shorty headers allow you to add the power of headers without having to change everything behind the headers. The Billy Boat Shorty Headers bolt right up to you OEM Catalytic Downpipes and are CARB certified! Built entirely of T-304 stainless steel, Billy Boat Performance Exhaust Shorty Headers for the C-5 Corvette are direct replacement parts for the factory equipment. Billy Boat Performance Exhaust is the originator of the LS1 and LS6 shorty header. Longer, equal length primary tubes increase performance and throttle response and large diameter 1.75" primary tubes improve flow. Unlike most header manufacturers who settle for an open collector, Billy Boat Performance Exhaust hand builds each of its 4-into-1 merged collectors for the best performance possible. In addition to a performance increase of 10 rear wheel horsepower, Billy Boat Performance Exhaust's Shorty Headers weigh 15.3 pounds, that is less than half the weight of the heavy OEM cast iron manifolds. Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette The Rubik's Cube is the most popular puzzle. Learn the easiest solution here.
Why swap out H pipe for X pipe?
Swapping out the H-Pipe for a real X-Pipe does a few things. First, it eliminates the structural feature that causes the bell-like jingle common to the H-Pipe. Second, it benefits exhaust flow since the crossover is now the full diameter of the exhaust pipe.
What size baffle is in a stock H pipe?
In fact the stock H Pipe has a 3/8" - 1/2" baffle in it....even though it is a 2 1/2" pipe the opening is that small! It's really not an H pipe at all but a sound dampening device.