Stock FAQs

what size are stock kitchen cabinets?

by Lawson Krajcik PhD Published 3 years ago Updated 2 years ago
image

Kitchen Base Cabinet Dimensions

Height, without countertop 34 1/2 inches
Height, with countertop 35 to 36 inches
Depth (front to wall), without counterto ... 24 inches
Depth, with countertop 25 to 26 inches
Standard widths 12, 18, 24, 30, 33, 36, 48 inches
Jul 4 2022

Kitchen Base Cabinet Height, Depth, and Width
Kitchen Base Cabinet Dimensions
Height, with countertop35 to 36 inches
Depth (front to wall), without countertop24 inches
Depth, with countertop25 to 26 inches
Standard widths12, 18, 24, 30, 33, 36, 48 inches
1 more row
Jun 14, 2022

Full Answer

What are the standard measurements for kitchen cabinets?

  • Kitchen base cabinet dimensions: The final height of the base units, including the countertop, should be between 35 and 36 inches. ...
  • Kitchen Wall Cabinet Dimensions: The standard height is 30 or 36 inches while the depth is at 12 inches. ...
  • Kitchen Wall Cabinet Above Refrigerator Dimensions: these are 12 or 15 inches in height. ...

What are the standard kitchen base cabinet sizes?

Full Height Base Cabinet Sizes

  • Height: Full height base cabinets will typically have doors approximately 30" H each.
  • Width: Standard widths for base cabinets start at 9" with 3" intervals up to 36 inches.
  • Depth: The standard depth for full height base cabinets is 24 inches. ...

What are some of the best kitchen cabinet designs?

  • Choose kitchen cabinet color depending on the amount of natural light in your kitchen. ...
  • Pick high-quality boxes for your cabinets because the box is the heart of your kitchen cabinet. ...
  • Pick a kitchen cabinet door style that you like. ...
  • Personalize your kitchen cabinets with the right finish and hardware. ...

What is the average height of a kitchen cabinet?

Height tends to be limited since the cabinets need to fit between the counter and the ceiling. Common wall cabinet heights are 12, 36, and 42 inches. In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits.

image

How deep are Stock upper cabinets?

12”-24”What is the standard size for upper kitchen Cabinets? The average wall or upper kitchen cabinets are 30”-42” in Height, 12”-24” in Depth, and 9”-36” in Width.

How are stock cabinets measured?

0:173:43Cabinets.com - How to Measure Your Kitchen - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's time to start measuring. Remember always use inches and measure to the nearest eighth of anMoreIt's time to start measuring. Remember always use inches and measure to the nearest eighth of an inch. Working from left to right or clockwise measure the full length of each wall.

What is standard cabinet width?

Kitchen Base Cabinet Height, Depth, and WidthKitchen Base Cabinet DimensionsHeight, with countertop35 to 36 inchesDepth (front to wall), without countertop24 inchesDepth, with countertop25 to 26 inchesStandard widths12, 18, 24, 30, 33, 36, 48 inches1 more row•Jun 14, 2022

What is the normal size of kitchen?

Overall, average kitchens in the U.S. are about 161 square feet in single-story homes and 174 square feet in multi-story homes. In homes under 1,500 square feet, the average kitchen is 103 square feet. In homes over 4,000 square feet, the average kitchen is 238 square feet.

What is the width of a standard kitchen cabinet?

Standard cabinet widths vary depending on the cabinet type. Upper kitchen cabinets are 12, 15, 18, 24, 27, 30, 33, and 36 inches. Upper filler cabi...

What is standard cabinet height?

The height of a standard cabinet varies depending on the cabinets. Base cabinets – 34.5-inches or 36 inches with countertop. Wall cabinets – 30, 36...

How deep are kitchen cabinets?

Base cabinets are 21 or 24-inches deep. The depth for a cabinet with a Lazy Susan is 33-inches. Wall cabinets are 12 or 24-inches. Tall cabinets ar...

What are standard base cabinet widths?

Base cabinets come in various widths to fit even the smallest spaces to make them more efficient. The standard base cabinet widths are 12, 15, 18,...

How deep should kitchen cabinets be?

Standard depths are 12, 15, 18, 24 inches, but 12 inches is the most common depth for regular wall cabinets used to store food and dishes. This depth allows sufficient space beneath the cabinets to make countertops ranging in depth from 24 to 26 inches usable.

How tall are utility cabinets?

Tall pantry or utility cabinets are often the roomiest of kitchen cabinetry. Standard tall cabinets are 12 or 24 inches deep and come in 12-inch, 24-inch, or 36-inch widths. They range in height from 84 to 96 inches (with 96 inches being a floor-to-ceiling cabinet in a room with standard 8-foot ceilings),

How wide are wall cabinets?

Like base cabinets, standard wall cabinets come in widths ranging from 9 to 48 inches in 3-inch increments. There are, however, few kitchens that can accommodate 48-inch-wide wall cabinets.

How tall should a cabinet be?

However, if the homeowner wants pull-outs or storage installed on the back of the cabinet doors and inside the cabinet, 36-inch-wide tall cabinets are recommended. Most of the time, 24-inch-wide tall cabinets work well for both pantry and utility cabinets.

What are base cabinets?

Base cabinets are the workhorses of any kitchen. They support countertops, surround, dishwashers and sinks, and allow for cutlery drawers. Base cabinets vary much more in width than in-depth or height. Available in 3-inch increments, in widths that range from 9-inch to 48-inch widths.

What is the standard width of base cabinets?

The standard base cabinet widths are 12, 15, 18, 21, 24, 26.25, 27, 30, 33, 26, 39 and 42-inches. Filler cabinets are available in 6 and 9-inch widths.

Is a pull out kitchen cabinet one size fits all?

Since standard kitchen cabinet sizes aren’t one-size-fits-all, their selection can be customized to fit the space available and homeowners’ needs. For example, pull-outs for base and utility cabinets such as drawers, carousels, or lazy susans for corner cabinets are ways to make the kitchen more efficient.

How tall is a base cabinet?

Base cabinets may have a single door, double doors, a series of drawers, or a combination of a drawer and doors; It all depends on your design needs.The standard size of a base cabinet is 34.5 inches tall without the countertop and 36 inches with the countertop. The toekick portion, which is the bottom part of the cabinet that sits on the floor, ...

How deep should a kitchen cabinet be?

Generally, the standard wall kitchen cabinet depth is 12 inches deep, but some can go up to 24 inches deep. For example, wall cabinets designed to be installed over a refrigerator will be deeper so the front of the cabinet lines up with the front of the appliance.

What is the hole in the middle of an oven cabinet?

Most oven cabinets come with a single hole in the middle for a single oven and three drawers underneath it.

How tall is a cabinet door?

If the base cabinet features a drawer, that drawer is usually about six inches tall, while the door height below it is 24 inches.

How many types of kitchen cabinets are there?

There Are Three Types of Standard Kitchen Cabinets. The first thing you need to understand is that kitchen cabinets come in three types: base cabinets, wall cabinets and tall cabinets. The base cabinets are those that sit on the floor, while the wall cabinets are, as the name makes clear, the ones that are mounted on the walls ...

What size are wall cabinets?

Wall cabinets come in a wider range of sizes. So what are the standard cabinet sizes for wall cabinets? For height, you have the option of 30 inches, 36 inches, or 42 inches. Once installed over your base cabinets, the top of your wall cabinets will be at 84 inches, 90 inches, or 96 inches, respectively. This leaves 18 inches of space between your ...

What size sink fits in a 30 inch cabinet?

What size sink fits in a 30-inch cabinet? Depending on the type of sink this can vary. If you want an under-mount sink it will need to fit within the 30” cabinet you can choose between a 26” – 28” sink. Note: the cabinet walls are ½” each and the lip of the sink another 1”. For a drop-in sink, you can add a 30” sink.

Standard Kitchen Cabinet Dimensions

If you aren’t a professional such as an interior designer, contractor, or architect figuring out kitchen cabinet sizing might seem like rocket science. But this needs focus because a few inaccurate numbers here and there could result in you constantly bumping into edges, could mean there’s a drawer lost somewhere, and so on.

Corner Kitchen Cabinet Dimensions

Corner kitchen cabinets are also referred to as blind corner cabinets. These are the types of cabinets that you can’t really see inside and are in the obscure areas or spaces in your kitchen where the random ingredients you’ve forgotten about, lost Tupperware pieces, and lost pot lids are usually hiding out.

Corner Kitchen Sink Cabinet Dimensions

One of the biggest sources of anxiety when it comes to kitchen redesign is the thought of deciding on corner kitchen sink cabinet dimensions and sizes. Sink placement is always an issue especially when you plan on redesigning your kitchen from scratch.

Kitchen Base Cabinet Dimensions

Kitchen base cabinets are essential pieces for the kitchen. They basically do the heavy lifting for as far as kitchen storage is concerned as they go right on the floor.

Upper Kitchen Cabinet Dimensions

These cabinets aren’t as heavy duty as the base cabinets as they don’t really have countertops to support but they still need to be sturdy enough to actually support the weight of plates, glasses, and other cutlery that you might have up for storage.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9