what product to use to refinish gun stock

Full Answer

How to refinish a gun stock?

The main point we are going to discuss is refinishing a stock. The stock can be coated with a thin layer of polyurethane. Polyurethane is a polymer that is used for cushioning of metals, especially for stock. Painting the stock with different metals like different paints can make gun design more beautiful and attractive.

What is the best finish for a gun stock?

There is no better oil finish! Tru-Oil® Gun Stock Finish has been the professional’s choice for gun stock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age.

How do you use Tru-oil gun stock finish?

For non-stained woods you will need to use the wet-sanding technique by using Tru-Oil Gun Stock Finish. If your wood is stained, you will need to use the Sealer and Filler to fill the grain. These specialty steps are optional and are not required.

What is refinishing a gun?

Refinishing can improve the value, price, and desirability of the buyers. The condition of the gun can be made much better through this process. In this process, a gun is disassembled, and all of its parts are cleaned, repaired, or restored.

Can you refinish a gun stock?

0:5715:45How to Refinish a Rifle Stock - woodworkweb - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this gun will be completely stripped and we will refinish it completely so that looks almost asMoreAnd this gun will be completely stripped and we will refinish it completely so that looks almost as though it came out of the factory. That what I'm working with today is a single piece of stock.

Can you varnish a gun stock?

0:225:49Gunsmithing - Stock Finishing with Bar Top Varnish Presented by Larry ...YouTubeStart of suggested clipEnd of suggested clipIt's a very attractive finish. But bar top finish as a filler is more durable the bar or tabletopMoreIt's a very attractive finish. But bar top finish as a filler is more durable the bar or tabletop varnish will give the stock a very hard and moisture repellant surface when used to fill the grain.

Is linseed oil good for gun stocks?

2:559:25GUNSTOCK FINISHING - Why Boiled Linseed Oil is BEST - Kurt's Custom ...YouTubeStart of suggested clipEnd of suggested clipSome of them. But none of those stand up to your years years like a good boiled linseed oil dry treeMoreSome of them. But none of those stand up to your years years like a good boiled linseed oil dry tree anion multiple coats can can give you another. Thing is like say if they give us a good scratch or

What do you put on a wood gun stock?

0:399:20Stock Care & Storage - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe would use I will recommend using a very very small amount of Bald linseed oil which.MoreWe would use I will recommend using a very very small amount of Bald linseed oil which.

What's the best finish for a gun stock?

The best finish to put on a gun stock is an oil finish. It is easy to apply, durable and can be used on finished and unfinished wood. Oil finish is also water-proof, prevents UV light from damaging the wood, and can last for several years.

Can you stain a gun stock?

2:095:21Rifle Stock Refinishing 2 of 3: Re-staining Ruger 10/22 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty light still someone give another coat of tobacco brown here a cool thing about usingMoreIt's pretty light still someone give another coat of tobacco brown here a cool thing about using these liquid stains is that you can put as many layers on as you want until you get the the right color

Is beeswax good for gun stocks?

Reviving gun stock shine Instead buff the wood up with a spot of beeswax furniture polish (don't use synthetic spray polish) on a clean soft cloth. A very small amount of beeswax will do. On the other hand if the stock was finished with oil then you can restore it with some stock oil.

What type of oil is used on gun stocks?

0:168:44Maintaining A Hand Rubbed Oil Finish Gun Stock: Caesar Guerini shotgunsYouTubeStart of suggested clipEnd of suggested clipSo it's kind of two general types of finishes available for gunstocks there's oil-based finishes andMoreSo it's kind of two general types of finishes available for gunstocks there's oil-based finishes and there's polyurethane. Or epoxy type finishes oil finishes are a very traditional method. And they'

Is linseed oil better than tung oil?

Tung oil creates a harder, more durable finish than linseed oil. Tung oil is more water-resistant than linseed oil. Raw linseed oil takes significantly longer to cure than pure tung oil. Tung oil is generally more expensive than linseed oil.

Can you use tung oil on a gun stock?

We recommend using our High Lustre Polymerized Tung Oil formulation as it builds to create a well sealed and durable coating, while maintaining a hand rubbed, “gun stock” finish.

What is gun stock wax?

Product Description. Gun Stock Wax - A high-quality formula combining protective and beautifying qualities of the finest carnauba, beeswax and silicone. Produces a lustrous water repellent film that will not rub off like oils. Offers maximum protection against finish cracking from weather and handling.

What is Tru-Oil finish?

Tru-Oil is a polymerized oil, which is a fancy term for an oil that has been cooked to cross link the molecules and help it dry faster when exposed to air. The trick to helping that drying process is to apply very thin coats.

What is the slowest finish to remove?

Home-finishes, varnish, polyurethane , even shellac, and factory epoxy are common. Removal time and technique involved varies by the chemical nature of the finish and how strongly it’s bonded to the wood. Polyurethane seems to be the most common and can be the slowest to remove, depending on the manufacturer.

How long does it take for oil based finish to dry?

Sometimes up to 10, even more coats are needed to achieve deep, lustrous beauty. Drying time between coats is at least one day. Drying times also vary, depending on humidity.

What does street value mean on a firearm?

The street value may mean something or nothing to you. As well, an extremely valuable firearm may be perceived of lesser value if modifications, including gunstock refinishing, are made to it. Really, it comes down to whether you want to focus on the collectible dollar value, or re-do the stock and get a look for your own personal enjoyment.

What is essential wood prep?

Essentials are: Thorough wood prep that prepares the wood for a new finish. Selection of finishing oils, hardeners, and drying components to maximize a handcrafted result. Determining the best application technique to achieve the desired finish and high-end outcome. Time.

Can you remove gun oil from wood?

Gun oil stains in wood: These are difficult to remove. Many can be removed completely, but not always. The severity and depth of the stain, type of oil that created it, and how long it’s been there are crucial factors. Some oil stain residue simply can’t be completely removed.

Does rubbing oil make wood grain pop?

In so doing, it reveals the true grain inherent in the wood. Rubbing oil penetrates, making the grain ‘pop!’. The penetrating oil also deepens contrast between light and dark wood fibers (grain), revealing the full beauty of the pattern. (And therein lies the ‘rub’ of hand-finishing.

Does refinishing a stock increase the value of a firearm?

Keep in mind refinishing a stock can definitely increase the “perceived value” and even street value of any firearm, simply because it looks so much better. I’m not referring to the collectability value of the firearm here, only to what others may be willing to pay for your gun should you want to sell it.

How to sand a gun stock?

1 Following final tooling on a new gun stock, begin sanding with a medium to coarse paper. 120 is typically enough grit to remove material quickly without being too aggressive. Always sand with the grain whenever using an abrasive.

How to apply Tru Oil gun stock finish?

If darker than desired, sponge wood with clear water. If lighter than desired, add more stain. 4 Allow the Walnut Stain to dry overnight before applying Tru-Oil® Gun Stock Finish.

How to keep stock edges sharp?

To keep stock edges sharp and the wood’s surface ripple-free, always sand with a sanding block. The block will prevent the abrasive from “digging in” on soft spots in the grain. And remember to sand AROUND checkering to keep the checkered peaks crisp. Keep checkering masked off until final application of oil.

How to apply Birchwood Casey gun stock sealer?

1 Apply Birchwood Casey Gun Stock Sealer and Filler generously and directly to wood with brush or a clean, lint-free cloth. Do not over brush. Let dry for 60 minutes or until thoroughly dry.

How to apply Tru Oil to a gun?

1 First, apply Tru-Oil Gun Stock Finish to the entire stock and allow it to penetrate the grain. Don’t rub it in, just let the wood absorb it. When the stock has soaked up all it can absorb, wipe away the excess and let dry for 24 hours ( Read Carmichel’s Tip below).

How to sand metal surfaces?

When sanding metal surfaces, wrap the paper around a stiff, at backer like a file. In addition to reducing hand fatigue, it will keep surfaces at and edges crisp. 4 Whatever you do, don’t try and rush metal preparation. Keep polishing until everything looks right.

How to control the color of walnut stain?

2 Walnut Stain is a concentrate solution; color intensity is easily controlled by adding water. Dilute with water before using to achieve a lighter color; or leave full strength for a darker color. It’s best to test color intensity on a scrap piece of wood. Generally 50/50 stain and water mix works for most situations.

How long does it take for gunstock to dry?

You will like this finish because it takes a relatively short duration to dry, usually between 2 to 6 hours, and it will give you one of the toughest surfaces out there. You will find this formula one of the easiest to use and most straightforward to apply.

Why is it important to maintain a gunstock?

Maintenance is critical if you want your gun or rifle to work correctly at all times. As the owner of a firearm, it is essential that you buy the Best Gunstock Finish as one of the ways to care for your rifle. Much as there are so many finishes for this purpose in the market, there are just a few that would give you the best result ...

What is the finish on a knife?

The finish is USDA approved for its lack of toxins, which makes it perfect for knife handles. This finish includes a degreasing agent that removes fingerprints, oil, gun powder residue, and a lot more. Feel free to use this formula over all your wooden surfaces from your gun and knife.

Can you use any color finish on a gunstock?

You cannot use a finish of any color on your gunstock, as it might spoil the whole project. If you are going to buy a finish to polish your gunstock, ensure that you go for a finish that resonates with your rifle and will add nothing but extra beauty and shine to your item. The Size/Amount of the Finish.

Do you have to go for a finish that is excess?

On the other side of the coin, you don ’t have to go for a finish that is excess for your project as it amounts to a potential waste of resources, especially if you have no large project to use the entire formula. In short, only buy what is enough for you. Budget.

Can you use a tactical matte finish on a nickel gun?

You can use it on the interior and exterior of the bore without having to worry about cases of toxins .

How to finish a gun stock?

Remove a Dent. The key is steam. Take a regular iron and set it on high. Grab an old T-shirt, washcloth, or a couple of .30-caliber-size cotton cleaning patches and dampen them.

How to fix scratches on a gun stock?

Just rub the stick across the scratch and work it in with a soft cloth. 3. Restore Faded Wood. Once you’ve steamed and sanded a stock, the wood can appear faded and worn.

How to remove rust from a gun?

To remove an unwanted bloom of rust on a gun, dab some gun oil on the afflicted area and work it over with a piece of No. 0000 steel wool. This extra-fine grade of steel wool won’t scratch or mar the metal on even fine guns. Once you’ve removed the rust, wipe the metal with a cloth to remove any small bits of the steel wool that may have come loose, and then apply a drop or two of gun oil for protection against future corrosion.

What happens when you sand a gun stock?

Once you’ve steamed and sanded a stock, the wood can appear faded and worn. This can happen when the stock is exposed to the elements as well, particularly water. Brownell’s Stock Rubbing ­Compound is to your gun what car wax is to your truck. Rub in this mildly abrasive ­compound, and as you buff it off, it will restore luster and protection to your stock.

How to fix a gouge in wood?

The steam will raise the wood. Repeat until flush. With fine ­sandpaper (600- or 800-grit), knock down any raised grain or high spots. 2. Fix a Gouge. Now you’ve done it. You banged your stock against a rock and have left an unsightly gouge. Start by following the steps to steam out a dent.

How long does it take for oil to dry on stock?

Before the oil sets up, which takes about 10 minutes, wipe it down with a soft cloth. Let dry for 24 hours, and repeat as necessary to bring the color back to where you want it. 5. Protect Your Stock.

Can you touch up a gun stock?

Touching up a gun stock isn' t as challenging as you might think. Jeff Wilson. Touching up wooden stocks doesn’t have to be intimidating, and you certainly don’t need a gunsmith to handle it. Here are a few tips to get you started with the easier fixes. Yes, it can be tedious, but with the best gun stock finish you’ll make your gun everything it ...

Step 1: Step 1

The gun has no flat surfaces so I only used steel wool to remove the finish. Start by applying a liberal coating of solvent over a section of the gun stock. Work a section at a time. Wait a minute or so and test the area. I live in a warm climate so my wait time is short. Solvent works best in warm weather.

Step 2: Step 2

Sand the gunstock. I used various grades to smooth it down. The grain will sometimes raise up when you strip wood. Try not to over sand to preserve the natural patina. In this case though I had to use a power sander as I was having trouble removing oil stains from the side that the solvent didn't remove. Wipe it down with a dust cloth.

Step 3: Step 3

Time to apply the finish. Working from the butt of the gun stock up, I coated the wood with Rustoleum Clear finish. if possible, always brush with the grain. The finish dries quickly like the stain. After about an hour, I lightly sanded the stock with 1200 sandpaper to remove any dust particles.

How to remove finish from a rifle?

After applying the remover on one side, wrap that side with a plastic sheet and repeat the same process with the other side. The plastic sheet will help the remover to work correctly as it will not dry out.

What is refinishing metal?

Mainly in refinishing, the metal parts are cleaned and polished. The metal parts that should be appropriately refinished are taken to the factory in which they were manufactured. It is done to protect their serial number, proof marks, pinholes, and sharp screws and edges.

What is the best way to remove walnut stain from a gun?

Fillers are used to duplicating the rich, walnut-hued stain. We use French red as many gun makers use it. Let it dry and wipe out the extra filler with the help of scrub pads. It would help if you rubbed it in the grain’s direction to take all the filler out of the pores.

What is polyurethane used for?

Polyurethane is a polymer that is used for cushioning of metals, especially for stock. Painting the stock with different metals like different paints can make gun design more beautiful and attractive. With this process, your old gun will look more beauteous. Refinish can be done in several ways.

What to do if you have 1% of doubt about your gun?

If you have 1% of doubt regarding your gun’s price, then don’t apply this process. Before doing the first step, wear plastic gloves and a protective eyepiece. So the remover that is a harmful substance doesn’t affect your skin.

How to protect surface from remover?

Also, use some newspapers or some piece of paper to protect the surface from the remover’s effect. Do this process in a highly ventilated area to protect yourself from breathing complications. Now let’s begin the process. 1.

Can you use a brush to remove grease from a gun?

The remover has loosened some of the greases that can be removed. We will not recommend any special brush; your old toothbrush will work best for this. Gun also contains some oil stains that can either be removed by pouring boiling water or with the help of a hairdryer.

How to remove finish from a gun?

The alternate method to remove your gun’s finish - and one that has become much more popular in recent years - is to use some form of chemical stripper. This method is much faster than using sandpaper, as it will typically remove finish down to the bare wood in just one application.

How to get rid of dents on wood?

Hand sanding is the most common option, as it’s relatively simple and effective, and it allows the most control over the process. You can follow the grain of the wood, work on dents and dings, and decide how much or little of the finish is removed. Start with a fine grit and work your way up to a coarser grit as needed.

How to get a dent out of wood?

Using the iron in a circular motion, press lightly to apply steam and heat liberally to the dent. Check your progress regularly to avoid overheating the towel or burning the wood. After a few minutes, the dent should be lifted out and the wood will look like new.

Can scratching be filled in with wood filler?

Minor scratches can be filled in with wood filler. On higher end stocks you may want to use specialized scratch-filling materials, which chemically bond to the wood and blend colors to match the grain perfectly, leaving no trace of the scratch. Dents and dings can also be repaired during this step.

Do long guns have wooden stock?

One thing that nearly every shooter will encounter at some point in their shooting career is the need to recondition or restore a wooden stock on a long gun. Most long guns made before 1960 have a wooden stock by default. With use over time, wooden gun stocks can get to a point where the finish is dull and damaged.

Can you use a power sander to sand a gun?

If hand sanding sounds like a lot of work, you can also use a power sander. Power sanders aren’t as precise, however, so take that into account when determining the best way to sand your gun’s stock.

Can you apply a finish in multiple coats?

Apply the finish in multiple light coats for best results. Be sure to leave ample time to dry between coats, which gives you an accurate idea of what your stock will look like at various stages of the coating process. You may decide to stop sooner or later than you initially planned.

Wood Preparation

Old Wood

Metal Preparation

Blueing Application

• 1 Apply Birchwood Casey Perma Blue® Paste or Liquid Gun Bluewith an applicator swab over the entire surface to be blued. Work as quickly as you can, but remember to be thorough. Rather than blueing the entire surface at one time, you may want to divide the work into 2 or 3 sections. 2Allow the blueing to stand on the metal for 30-60 seconds.No long...

See more on birchwoodcasey.com

Browning Application