How big are the wheels on a Harley Davidson Road Glide?
Harley-Davidson Road Glide Specs Ground Clearance 140 mm (5.5 inches) Trail size 173 mm (6.8 inches) Wheels details Enforcer II Cast Aluminum Front Tyres - Rims dimensions 130/70-B19 26 more rows ...
What are the brakes like on a Harley Davidson Road Glide?
As for stopping power, the Harley-Davidson Road Glide braking system includes Double disc. ABS. 4-piston size at the front and Single disc. ABS. 4-piston size at the back. 658 mm (25.9 inches) If adjustable, lowest setting.
What kind of suspension does a Harley Davidson Road Glide have?
On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Harley-Davidson Road Glide has a frame with front suspension being Telescopic fork and at the rear, it is equipped with Twin shocks . Stock tire sizes are 130/70-B19 on the front, and 180/65-B16 on the rear.
What size front wheel do I need for my Harley?
If you are craving a wider front wheel for your Harley touring model, you do have options. SMT Machining manufacturers the Bulldog series, which makes a 21” wheel 5.5” wide. The larger width gives the tire a taller profile that is similar to the 23” wheel and tire outer diameter.
How wide is a Harley rear fender?
Width: 9" Tip-to-tip: 28-1/2"
How wide is a Dyna Wide Glide rear fender?
6" wide. No belt or chain cutout.
How wide is a Fat Bob rear fender?
7 1/4 "Width inside side: 6 " Width outer side: 7 1/4 "
How wide is a Softail rear fender?
HARLEY DAVIDSON Softail OEM 240MM Rear Width Motorcycle fender set.
How wide is a Sportster rear fender?
Both will. 82-03 Sporty and Dyna had 7.25" fender widths between the fender struts, and shared the same fender.
How wide is a Softail Slim rear fender?
7.125" wide2018-2021 Harley-Davidson Softail Slim FLSL Models Fenders are 7.125" wide, and the 4" extended tail sections over stock will make the bike look lower and more flowing. All stock mounting points stay intact and are used. Made in the U.S.A.
How much horsepower does a Harley-Davidson Road Glide have?
The Harley-Davidson Road Glide has 89.00 HP (65.0 kW)) @ 5450 RPM.
How much does a Harley-Davidson Road Glide weighs?
The Harley-Davidson Road Glide weighs 372.0 kg (820.1 pounds).
How tall (seat height) is a Harley-Davidson Road Glide?
The Harley-Davidson Road Glide seat height is 658 mm (25.9 inches) If adjustable, lowest setting.
How many gears does a Harley-Davidson Road Glide have?
The Harley-Davidson Road Glide have 6 gears.
What size front wheel for Harley touring?
SMT Machining manufacturers the Bulldog series, which makes a 21” wheel 5.5” wide. The larger width gives the tire a taller profile that is similar to the 23” wheel and tire outer diameter.
What size front tire fits a Harley?
A 21” (diameter) x 3.25” (width) front tire will fit on a Harley without requiring you to change out the fender. That said, it is important to note that depending on the model year, the fender may need to be relocated.
What is the largest front wheel for Harley?
In summary, when it comes to installing the largest front wheel you can install on your Harley-Davidson touring model without changing the fender: The 21” wheel is the most economical way to get a bigger custom wheel without getting a new fender or raking your bike out.
Can you put a front wheel on a Harley without changing the fender?
Largest Front Wheel You Can Install On A Harley Without Changing Fender. Wide motorcycle wheels make your Harley-Davidson touring model look tougher, yes, but there are other reasons why you may be considering upgrading your front wheel. Large wheels are better able to absorb disturbances on the road’s surface, thereby giving you a smoother ride.
Do you need a rake kit for a bulldog tire?
Installing a front tire from the Bulldog Series does require installing a new fender. You will need a rake kit for this job. Rake kits are available in weld-in and bolt-on forms. Rake kits are available in a 26” front wheel version and a 30” version.
Why are the saddlebag rails disconnected from the rear struts?
12) The saddlebag rails are disconnected from the rear struts because the license plate bar has been removed. Reattach the saddlebag rails to the struts by using Bad Dad's Eliminator Bracket. This will bring the saddlebag rails back into alignment. Note: You do not need to use Bad Dad's bracket.
How to remove struts on a motorcycle?
1) Here is the back of the stock bike. Begin by removing the seat. 2) And remove the saddlebags. 3) Then remove the chrome strut covers. You will not reuse the strut covers with the Bagger Fender. 4) Next remove the license plate bracket from the back of the motorcycle. Remove the upper bolts first.
What happens if your exhaust is not centered in the exhaust hole?
If your exhaust is not centered in the exhaust hole then the pipes can be rotated until the pipes are properly aligned.
Does Bad Dad cut the fender?
Bad Dad pre-cuts all mounting holes in the fender prior to shipping your custom order. However, we cannot pre-cut this area prior to shipping as it weakens the front edge of the fender during shipping which increases the chance for shipping damage. You will want to make this quick trim if your seat pan requires it.
Do you need to cut the fender on a bagger fender?
However, you will need to cut the OEM fender if you are using the All-in-One Bagger Fender or the Bagger Fender with Flush Mount Center Brake Light. The OEM fender needs to be cut for these two applications to make room for the taillight housings featured on these custom fenders.
