How big is the chrome bar on a road King?
Designed to provide extra comfort for the Road King ® rider, this chrome bar is 4-1/2 inches higher and 2 inches narrower than the stock handlebar found on '96-99 Road King ® models and 3-1/2 inches higher and 1-1/2 inches narrower than stock handlebar on '00-'01 Road King ® models. models. Fits '96-'07 Road King ® and '02-'07 Road Glide ® models.
How to choose the best handlebars for road King?
If the handlebar you want to use is measured from the inside edge to the other inside edge, just add 2 centimeters to your shoulder measurement to get the right size. We believe by now, you will not have any difficulty selecting the best handlebars for road king.
Do the heritage bars fit on the king?
The stock bars impressed me as a set up that fit no one. The Heritage bars should be standard on the King with enough cable and brake line for another couple of inches of height or pull back for those who still might want it.
Which motorcycles have stock handlebars?
Motorcycle Stock Handlebar Measurements - Harley Davidson, Triumph, Victory, Honda, Kawasaki, Suzuki, Yamaha, Buell, Ducati and Indian See how we Measure Handlebars at the bottom of this page and also info on the Harley Davidson use of an electric throttle assembly. New cables and new brake lines?
What size are stock Road King handlebars?
Designed to provide extra touring comfort for the Road King® or Road Glide® rider, this 1.0" diameter stainless steel bar has 3.0" more pull back compared to the stock '08-'13 Road King handlebar. This Heritage Style Bar has the same dimensions as the '14-later Road King Original Equipment bar.
What height are stock Harley handlebars?
Harley Davidson ModelHarley Davidson DescriptionHeightXL883LSportster 883 Low/SuperLow6"XL883NSportster Iron 8834-1/2"XL1200CSportster 1200 Custom (Risers 6")Drag BarXL1200CSportster 1200 Custom (Risers+Speedo 6")4-1/2"49 more rows
What is the end rise on motorcycle handlebars?
The easiest way to measure the rise of a handle bar is set it on a flat surface against a wall and from the bottom up measure the end of the handlebar. This Cycle Standard No. 10 Off Road Handlebar is measuring 6-1/4" in end rise.
What size are stock handlebars?
As far as industry standards, Handlebars typically come in either 1" or 7/8" diameter.
How tall should my motorcycle handlebars be?
1:025:27How to Choose the Proper Bar Height for Max Comfort - Harley DavidsonYouTubeStart of suggested clipEnd of suggested clipRun. About right here you know home I want my arms parallel to the ground I want my fists shoulderMoreRun. About right here you know home I want my arms parallel to the ground I want my fists shoulder height. And I want my hands. Right about shoulder width apart.
How do you measure the rise on handlebars?
1:193:18measuring bmx handlebars and finding critical dimensions - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou use one to connect the tooth that's the bar ends. And they use another tape measure to measureMoreYou use one to connect the tooth that's the bar ends. And they use another tape measure to measure from the bottom of the bar to the top now and where these intersect.
How do you measure a Harley Davidson handlebar riser?
0:091:23How to Properly Measure Handlebar Risers on a Harley DavidsonYouTubeStart of suggested clipEnd of suggested clipIn order to measure it. You would measure from here to the centerline of the handlebar. And thisMoreIn order to measure it. You would measure from here to the centerline of the handlebar. And this one's kind of goofy because it's angled. But I would measure from there to there.
What is end rise handlebars?
End Rise. This is the measurement from the middle of bar center to middle of the bar end. Drilled. This means that small holes have been drilled into the underside of bar ends (where the hand controls will sit) and directly in the middle of the clamping area to allow you to run your switch wiring internally if you want ...
How are road bike handlebars measured?
With your drop bars on the ground, take your tape measure and hold it in the centre of one bar end. Pull the tape across to the centre of the opposite bar end. Take a reading where the tape crosses the centre of the bar end. This measurement is the width of your road bike handlebars.
Are handlebar risers universal?
Bar riser. Universal or bike-specific bar risers offer a more relaxed seating position and improved comfort. A wide range of universal bar risers is available in silver or black with height adjustments from 15 to 50 mm. The durable and weather-resistant bar risers fit handlebars with diameter 22 or 28 mm.
What size are stock Road Glide handlebars?
1.25" diameterOr be notified when back in stock. This 1.25" diameter bar features an optimized ergonomic design for taller and long-limbed riders. This 1.25" diameter bar features an optimized ergonomic design for taller and long-limbed riders.
How do I choose motorcycle handlebars?
0:5719:18How To Choose Handlebars & Risers For Harley-Davidson MotorcyclesYouTubeStart of suggested clipEnd of suggested clipAnd grab yourself a measuring device this is a dial caliper. I think it's probably the easiest wayMoreAnd grab yourself a measuring device this is a dial caliper. I think it's probably the easiest way to rapidly. Figure out what diameter a handlebar is and you're gonna want to take a couple
KST Kustoms- company background
KST Kustoms is based right here in the good ole' US of A, operating in the sweet southern air of Bremen, Georgia.
Opening the box
My first impression of opening the box was pretty basic- a big, more or less, empty box with a set of very well wrapped bars in it. I don't need much more than that. The bars were wrapped from tip to tip, with nowhere for any of those pesky scratches to get in.
Installation
These bars feel good and have a nice weight to them. They feel like a high-quality component. Installation was pretty straightforward- a few basic hand tools and a couple of beers paired up with some good music in the background for... ambience.
GET A Grip!
The stock Harley-Davidson grips are exactly what they need to be- functional and cheap so that there is no regrets about taking off a good quality part to replace it with something that looks or feels better.
Mirror, MiRROR ON MY BIKE
Talking about disappointment though- another point of contention with my Road King was the stock mirrors- the finish was truly despicable for a motorcycle that costs as much as a small car. The ironic part is, I actually like the factory Harley-Davidson mirrors. They have a unique, "Harley shape" and they have a great field of view.
Final thoughts
The guys at KST make some bold claims about their products and company and I'm here to tell you- they back them up. They are friendly, helpful and very responsive and the best part is, they deliver exactly what they promise- high quality parts with a great price and exceptional customer service.
