Full Answer
What are the specs of a 4 6L Ford engine?
Ford 4.6L Engine - Specifications Metric Value Max torque @ RPM (in a Ford vehicle) 390 lb-ft @ 3,500 rpm Cylinder Head Aluminum Cylinder Block Cast iron / Alumium (depending on versio ... Camshaft Drive Chain 4 more rows ...
When did the first Ford Modular engine come out?
Built between 1990 and 2014, the Ford 4.6L architecture was one of the first engines to be part of the Ford Modular family. The first vehicle to be powered by this engine was the Lincoln Town Car in 1990.
Do modular engines work the same way pushrod engines?
He knows that for his 4.6 Ford to last round after round, he has to have a good bottom end. It turns out that not only do Modular engines work basically the same way as their pushrod counterparts, but they respond very well to any type of forced induction.
What kind of engine is in a 2 valve Modular truck?
Most two-valve Modulars were built with either a Windsor or Romeo cast iron block, with slight differences between the two blocks. Windsor engines were supplied in most trucks, with the ’99-’00 Mustang GT also utilizing that version of the cast block.
How high can a Ford 4.6 Rev?
One was to hook in a tuner and remove the Ford Factory Rev-Limiter the Stock engine would turn 7,500 RPM. And if it did even make it a few times very soon a rod would or rods would be hanging out of the block.
How much power can a stock 4.6 Mustang handle?
4.6L Mustang Engine Power Limits For 4.6 engines with 2 valve heads (2 valves per cylinder), the power limit is around 400 rwhp. This is for both NPI and PI models (1996-1998 and 1999-2004). On 3 valve engines (2005-2010), the power limit is increased slightly to around 450 rwhp.
How much power does a 4.6 V8 make?
Supercharged 4.6L V8 = 500+ Horsepower The V8 now makes 540-600 horsepower depending on boost level.
How many miles is a 4.6 good for?
It seems that they either seize before they get off of the transport truck (brand new) or run 200,000 miles with regular service. The 4.6L engines I work with are serviced religiously and run well over 150,000 mile in SEVERE service.
How can I get more horsepower out of my 4.6 Mustang?
1:4117:35An Easy Way to Get Big Power From a 4.6-Liter Mustang - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the kit comes with rubber isolated well nuts that expand when you tighten. Them this kit comesMoreNow the kit comes with rubber isolated well nuts that expand when you tighten. Them this kit comes with a zero to 1500 psi gauge for the bottle which is usually a separate purchase with other setups.
How much HP does a 4.6 Mustang have?
Acceleration and Power The Ford Mustang comes with one of three engines -- a 4.0-liter V6 that makes 210 horsepower and 240 pound-feet of torque, a 4.6-liter V8 that makes 300 horsepower and 320 pound-feet of torque and a 5.4-liter V8 that makes 500 horsepower and 480 pound-feet of torque.
How much horsepower can you get out of a 4.6 L Ford V8?
Its maximum power output was 390 horsepower and 390 pound-feet of torque.
Is a 4.6 V8 a good motor?
Is the Ford 4.6L V8 engine reliable? Yes, we believe this engine earns above average remarks for reliability. There is a reason Ford stuck with the 4.6 V8 in so many flagship cars like the Mustang GT, F-150, Police Interceptor, etc. The Ford 4.6 engine offers a great balance of performance and reliability.
How much HP does a 4.6 L V8 have?
300 @ 5,750 rpmFord 4.6L SOHC V-8Ford4.6L SOHC V-8Horsepower (SAE net)300 @ 5,750 rpmTorque320 lb.-ft. (434 Nm) @ 4,500 rpmSpecific output65 hp/L7 more rows
Is the 4.6 Mustang a Triton?
The F150 4.6 is a Triton motor and the Mustang is a modular engine.
How many miles does a 4.6 Mustang engine last?
Despite being a fuel-consuming muscle car, Ford Mustangs have exceptional durability if you maintain them well. These cars can last for 200,000 miles without any major issues.
What size engine is a 4.6 liter V8?
4.6 L. The 4,601 cc (4.6 L; 280.8 cu in) displacement 90-degree V8 has been offered in 2-valve SOHC, 3-valve SOHC, and 4-valve DOHC versions. The engines were also offered with both aluminum and cast iron blocks, depending on application.
What is a 4.6L engine?
Sponsored Links. The Ford 4.6L engine is a naturally aspirated V8 from Ford Motor was used to power a variety of different vehicles like sports cars, pickup trucks, sport utility vehicles, luxury sedans and cargo vans. Throughout its lifespan, it was offered with either 2, 3 or 4 valves per cylinder, featured either a single (SOHC) ...
How many valves does a Ford 4.6 have?
Throughout its lifespan, it was offered with either 2, 3 or 4 valves per cylinder, featured either a single (SOHC) or a dual overhead cam (DOHC) setup. Built between 1990 and 2014, the Ford 4.6L architecture was one of the first engines to be part of the Ford Modular family.
What is the fastest Ford engine?
The fastest and most powerful Ford vehicle to be powered by this engine was the supercharged 2003 Ford Mustang SVT Cobra, also known as the Terminator. Its maximum power output was 390 horsepower and 390 pound-feet of torque.
When was the first car powered by a SOHC engine?
The first vehicle to be powered by this engine was the Lincoln Town Car in 1990. Back then, its 2-valve SOHC configuration allowed to developed 190 horsepower and 260 lb-ft of torque.
What engine block did Ford use for the 4.6?
All dual overhead cam 4.6 engines came with an aluminum block from Ford, with the exception of the ’03 to ’04 Cobra engines, because Ford engineers believed the cast iron Romeo block to be a stronger choice for the supercharged Mustang.
When did Ford introduce the modular engine?
Way back in 1996, Ford introduced their all new “Modular” engine in the Mustang GT and Cobra. All around the country, die-hard five liter fans hung their heads and sighed. You could take everything you knew about how to make your 5.0 Mustang faster and just throw it out the window. Way back in 1996, Ford introduced their all new “Modular” engine in ...
What bolts are used for ARP 2000?
They can be supplied with ARP 8740 or ARP 2000 material cap screws, with a strength advantage going to the ARP 2000 bolts. The H-beam rods will usually support up to around 750 flywheel horsepower with the 8740 bolts, and over 1000 horsepower with the better ARP 2000 bolts.
How many cubic inches is a 4.6 liter?
The bigger bore, combined with a stock stroke, increases the 4.6 liter to 305 cubic inches and 323 cubes when combined with a 3.750” stroker crank. Note that when switching to the much larger 94mm bore size, it is also necessary to use larger bore head gaskets that are available from Ford Racing and Cometic.
What type of block is used in a 2 valve motor?
Most two-valve Modulars were built with either a Windsor or Romeo cast iron block , with slight differences between the two blocks. Windsor engines were supplied in most trucks, with the ’99-’00 Mustang GT also utilizing that version of the cast block.
What type of crankshaft does a Cobra have?
Cobra engines were equipped from Ford with a stronger forged micro steel crankshaft with only the 8-bolt flywheel pattern.
