The factory standard tires are 31.6’ in the form of 265/65/R18 and 33” in the form of 275/60/R20, so an extra inch is possible. If you are not prepared to do trimming and cutting and you are running stock suspension then you’ll be limited to a maximum of 33.5-inch tires, however, this is not recommended.
Full Answer
What size tires can you put on a Chevy AT4?
When looking at the current At4 shapes, the maximum tires size you can go in 18” is any of the below configurations: *UCA clearance might be an issue with the 305/70R18. The wider tire could make contact when you turn at full lock and thus interfere with the control arms.
Will stock rims fit on a lifted truck?
i've ran stock wheels on all my lifted trucks before and never had a problem. everything should be fine. just lifting a truck makes you more prone to roll overs no matter how wide your rims and tires are. Pats1pab1- i'm not sure if they will fit without the lift, i've got 265's on it now, they may fit with some trimming and torsion bars turned up.
What is the best tire size for a dirt bike?
285-75-17 best w/o throwing sh-t all over the side of your truck. nitto makes a really good tire, the 285 is 33.86in tall. some guy's run the 305-70-17, 1in wider thus the dirt.
How do I know what size tires to put on Wheels?
Go to TireSize.com > Search your size > Find the “Generally they are approved to be mounted on “X” wide wheels. Recommended wheel size: Generally 235/80/17 are approved to be mounted on 6-7.5″ wide wheels.
Can you put big tires on stock rims?
As a general rule of thumb, it's safe to fit a tire up to 20 millimeters wider than stock on the original rim. The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch (12.5 millimeters) increase in rim width.
What's the biggest tire you can fit on a stock?
So what are the biggest tires you can fit on a stock F150? The largest tires you can fit on a stock F150 without removing the crash bars are 33”- 34” without severe rubbing. Alternatively, you can fit 32” if your rims are 10” wide.
How big can my tires be without a lift?
33”On average, if your truck isn't lifted, you can fit tires up to 33”. In case the vehicle is lifted, you can find a good set of 37” or larger tires to fit.
What size tires fit a Chevy Blazer?
2020 Chevrolet Blazer RS Tire Size: 235/55R20.
Can I fit 33s on a stock Chevy 1500?
Generally most newer Chevy Silverado pickups can fit 33 inch tires with just a leveling kit. If you want to fit 35 inch tires a lift is more likely to be required.
How wide are stock Chevy rims?
The standard wheel is a 17-inch steel rim, while the remaining 2019 Silverado wheel choices are aluminum and range from 17 to 22 inches in diameter, with varying designs, widths and finishes.
Are Bigger tires bad for your truck?
When you put bigger tires on your car, SUV, crossover, or light truck, you raise the vehicle's clearance — increasing body roll and load transfer, which may negatively impact your car's balance and speed.
Does a leveling kit allow bigger tires?
How Big Of A Tire Can I Fit With A Leveling Kit? With most leveling kits only offering 1-2.5 inches of lift, your tire size options are limited. Generally, you should be able to fit a tire that is one to two sizes larger than stock. Some applications may allow a tire that is up to three or four sizes larger than stock.
Do bigger tires make truck taller?
The benefits of bigger wheels Fitting larger wheels is a staple off-roading modification for a reason. Larger wheels do lift a truck higher into the air, increasing ground clearance. But the increase in wheel size has additional benefits. A larger wheel means larger tires can be fitted to the truck.
What size tires go on a 1998 Chevy Blazer?
Standard tire size:P 205/75 R 15Tire width (mm):205Tire sidewall factor:75Rim size (in):15Total wheel diameter (mm / in):688 / 27.1
What tires come on Chevy Blazer?
235/65R18All-Season Tires.Fits your car.In Stock.
What size is 235 75R15 in inches?
235/75R15 tires are 28.9″ tall, have a section width of 9.3″, and fit wheels with a diameter of 15. The circumference is 90.7″ that translates into 699 revolutions per mile. As a rule, they can be mounted on the wheels with 15″ x 6-8″(LT Tires 6-7″) rim width.
What size wheels should I use for a 4runner?
When it comes to our world, 17″ wheels are probably your go-to size. You want to stay away from 20″ wheels on your 4Runner if you plan on frequent off-road trips. When it comes to a smaller wheel size, you can air down the tire pressure further than you can with a 20″ wheel.
What size tires should I use for a 33" tire?
Most owners make the jump to a 33″ tire (285/70R17 – 32.71″). Moving up to a 33″ tire requires a leveling kit or a lift kit. If you have 3″ of lift in the front, then moving to a 33″ tire should be fine, but there are 33″ tires that will rub even with 3″ of lift.
What is a 32.79 tire?
Some 32″ tires measure closer to 33″ tires. For example, a 32.06 is basically a 32″ tire, while a 32.79 is closer to a 33″ tire. If you get a 32″ tire that is closer to 33″, you may end up doing a BMC and other modifications like a fender liner push back to ensure your tires will not rub without a leveling kit.
How much lift kit for 4runner?
Most owners that have a lift kit are still at the same level of a leveling kit, but possibly up 1″. The basic suspension lift kit for a 4Runner is 3″ – 3.5″. 33″ tires are usually fine without any major modifications here, but it also depends on the exact measurements of your 33″ tires and the terrain.
What size tires are good for a medium?
The good happy-medium tire size is probably 32″ – 33″. With 33″ (285/70R17) tires, you can still trek just about anywhere you want off-road while still maintaining some decent MPGs. A larger tire has a greater circumference. So the wheel turns fewer revolutions to go the same distance as a smaller tire.
Do you need a lift for 33" tires?
In most common cases, you will want to go with 33″ tires. With 33″ tires, you need a 3″ lift in order to avoid a BMC, but not always. Once you go to 33″ tires, you will likely need to chop the body mounts. If you only have a 2″ leveling kit with 33″ tires, you will need to do a BMC for sure.
Do you need a BMC for a 4runner?
If you only have a 2″ leveling kit with 33″ tires, you will need to do a BMC for sure. With 34″ tires and 3″ of lift, you will need to do a BMC, trim your fender liners, push back your fender liners and cut into your 4Runner’s body.
Big Tires on the GMC AT4 – (Fuel Economy & Performance)
With any upgrade, comes a small tradeoff and a big tire upgrade is no exception. Fitting wider, heavier tires definitely comes at a price and since the tires are positioned below the suspension, they fall part of the unsprang weight of the truck.
What AT4 Owners Say
For sizes, I just put 295/60R20 Cooper Discoverer STT Pro tires on my AT4 and they fit with “no” rubbing. I say “no” because I did manage to get them to very, very slightly hit the mud flap bracket on a hard right turn into a steep uphill parking lot, so a mud flap removal may be necessary depending on where you drive.
Conclusion
So the takeaway here is, without a 2” or 3” suspension upgrade or leveling kit and you really limited to a 34.8” tire. Anything bigger and you’ll need to do cutting and trimming of wheel wells. You’ll be limited to the biggest 34-inch.