Full Answer
What is a round lot of stock?
A round lot is a standard number of units (known as a "lot") of an asset - for example, 100 shares of a stock, or any group of shares that can be evenly divided by 100, such as 500, 2,600 or 14,300.
Can I order a round bar from standing stock?
For example, round bar with diameters of even millimetres (or in the US, on the eighths of an inch) can usually be ordered from standing stock. Bar diameters of nonstandard sizes can also be obtained, but only as a separate mill run from the rolling mill.
What is round-trip trading?
Round-Trip Trading. What is 'Round-Trip Trading'. Round-trip trading is the practice of purchasing and selling shares of the same security time and time again in an attempt to manipulate observers into believing that the security is in high demand. Next Up. Enroned. Enronomics. Price Swap Derivative.
What is round bar?
Round Bar is a long, cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. Standard diameters range from 1/4″ all the way up to 24″.
What is a round stock used for?
Common applications of aluminum round bar include supports, trim, shaft, braces, pins, and dowels. Brass round bars are used when strength, electrical conductivity, corrosion resistance, and spark resistance are important.
What is round rod?
A round bar is a long, cylindrical metal bar that is just as it looks. Round bar is available in a number of plastics, from hot rolled or cold rolled steel, stainless steel, titanium, alloy steel, brass, and more, and in a wide range of diameters from 1/4′′ to 24”. Aluminum Round Bars.
What does a bar stock look like?
The most common shapes are round (circular cross-section), rectangular, square and hexagonal or hex. A bar is characterised by an "enclosed invariant convex cross-section", meaning that pipes, angle stock and objects with varying diameter are not considered bar stock.
Where are round bars used?
Most common use of Steel Round Bars are for Pump Shafts, Machined Components, Valves, Dairy Equipment, Machine Tools, Pins, Hinges, Surgical Parts, Metal Parts etc.
What is flat bar?
Flat Bar is also referred to as Rectangular Bar. It is measured by first taking its width and then its thickness. It has a wide range of uses including construction, tools, mechanical parts, ornamental parts and more. Flat Bar is available in many metal types including: Alloy Steel.
How is round bar made?
1:325:05HOW ITS MADE: Stainless bar and billet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe continuous cast material or ingots are pre rode in a blooming mill and then transported to aMoreThe continuous cast material or ingots are pre rode in a blooming mill and then transported to a heating furnace to be reheated to the correct rolling. Temperature.
What is plate stock?
Plate stock typically has a flatter, rectangular shape in its native form. Unlike bar stock, plate stock has a broader aspect ratio with varying width, depth, and height. Plate material is formed using casting or continuous casting processes, making large blanks, called billet, at various thicknesses.
What is a rod stock?
Metal rod and bar stock are metals and alloys in the form of round bars or rod, square bars, rectangular or flat bars, hexagons, and other bar stock shapes.
How do you control a bar stock?
Here are five things an effective inventory management system can do when you first open a bar.Reduce drink shortages. ... Optimize alcohol order size and purchasing frequency. ... Avoid rush orders. ... Reduce waste at your bar. ... Increase profit.
What is round steel used in?
Round bars: SS round bar is one of the most vital players in the machining industry. With the fabulous property of corrosion resistance, SS round bars are employed in manufacturing industries that are indulged in the production of fasteners and machineries.
What is square rod used for?
a stick used for measuring.
What are square bars?
Square Bar is a solid metal bar that has a square cross section. These bars are widely used in many industries for general assembly or manufacturing. They are also used for general repairs of plant equipment and railings. Common applications include ornamental iron work, gates and protective barriers on windows.
Multipurpose 4140 Alloy Steel Rods and Discs
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
Hardened Multipurpose 4140 Alloy Steel Rods
These rods are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.
Tight-Tolerance Multipurpose 4140 Alloy Steel Rods
Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance.
High-Strength Multipurpose 4140 Alloy Steel Rods
Often called ETD- 150, these rods are made from a modified version of 4140 alloy steel and have been drawn at high temperatures for excellent strength.
Multipurpose 4140 Alloy Steel Tubes
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
Easy-to-Weld 4130 Alloy Steel Round Tubes
4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.
Easy-to-Weld 4130 Alloy Steel Rods
4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.
What Is Round-Trip Trading?
Round-trip trading, or "round-tripping," usually refers to the unethical practice of purchasing and selling shares of the same security over and over again in an attempt to manipulate observers into believing that the security is in higher demand than it actually is.
Understanding Round-Trip Trading
Round-trip trading is an attempt to create the appearance of a high volume of trades, without the company behind the security experiencing an increase in income or earnings.
Example of Round-Trip Trading
One of the most famous instances of round-trip trading was the case of the collapse of Enron in 2001. By moving high-value stocks to off-balance-sheet special purpose vehicles (SPVs) in exchange for cash or a promissory note, Enron was able to make it look like it was continuing to earn a profit while hedging assets on its balance sheets. 2
Multipurpose 4140 Alloy Steel Rods and Discs
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
Hardened Multipurpose 4140 Alloy Steel Rods
These rods are hardened for increased abrasion and impact resistance. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress.
Tight-Tolerance Multipurpose 4140 Alloy Steel Rods
Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance.
High-Strength Multipurpose 4140 Alloy Steel Rods
Often called ETD- 150, these rods are made from a modified version of 4140 alloy steel and have been drawn at high temperatures for excellent strength.
Multipurpose 4140 Alloy Steel Tubes
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
Easy-to-Weld 4130 Alloy Steel Round Tubes
4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.
Easy-to-Weld 4130 Alloy Steel Rods
4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.
Process and types
This section possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (October 2015) ( Learn how and when to remove this template message)
Uses of bar stock
Bar stock is widely used in many industries and can be seen in many different industrial processes. These processes include forging, extrusion, machining, and many more. In forging, billets are heated to high temperatures before a press pushes the workpiece into the shape on the die.
Standard sizes throughout a supply chain
To stock every possible size of bar stock (every possible fraction of a millimetre or inch in diameter or thickness) is impossible. Thus, bar stock is stocked by metals supply houses in various standard sizes, arrayed in discrete steps.
Drill rod
A drill rod is tool steel round stock ground to a tight tolerance diameter; it is usually ± 0.0005 in (0.0127 mm). In the UK the name " silver steel " is often synonymous and sometimes hyponymous. Its origin was in reference to the shiny ground appearance (not to any silver alloying content).
Ground flat stock
Ground flat stock is annealed steel that has been ground to close tolerances (compare to drill rod ). There are four types of materials available: O-1 tool steel, A-2 tool steel, A-6 tool steel, and 1018 steel (low-carbon or low-carb steel).
