To get technical, the FAD is one weak point, but we can discuss that in another post. People pay over $5,000 for Rubicon “Take-Off” axles. New Dana 44’s can run $10,000 a set, axles which would be considered a worthwhile upgrade can easily run over $15,000 a set.
Where can I buy Jeep Rubicon axles for sale?
This should not limit ability to buy Jeep Rubicon axles for sale over the Internet. AxleGuys.com is one example of a leading factory components dealer. The junk yards and other places where we procure inventory for the public improves our own reputation.
Are the front axles of a Rubicon TJ and JK interchangeable?
The front assembly type depended on the model number of the SUV. The TJ and JK each have separate components that are unfortunately not interchangeable. When it comes to buying a used Rubicon front axle for sale, pricing is all over the place.
What causes a jeep Rubicon front axle to fail?
In the case of the Rubicon, bending and flexing of the front shaft is what will lead to failure. It is not even a prerequisite to take a Jeep off road. Regular driving on roads that are less than perfect can bend the front axle beyond repair.
Why do people buy used Jeep axles?
Auto mechanics or brave consumers who attempt the procedure can stick with used Jeep axles due to lower price point. Good and bad aftermarket products exist. There are companies building actual replicas of Rubicon front axle assemblies for sale. This can be luring to consumers who appreciate the few extra dollars being saved.
How much is a Jeep axle?
Jeep Wrangler Axle Shaft Replacement Cost Estimate. The average cost for a Jeep Wrangler axle shaft replacement is between $948 and $1,003. Labor costs are estimated between $188 and $237 while parts are priced between $761 and $766.
What axles are in my Jeep JK Rubicon?
All four-door JK Wrangler original owners do have Dana 44s under the rear end. Currently, if you have purchased the new JL Wrangler, you have Dana 30 front and Dana 35 rear axles, unless you specifically bought one with upgraded Dana 44s. All Rubicon JL owners have a Dana 44 front and rear axle.
What axle does a Rubicon have?
Dana 44 axleRubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. The width of the axle shafts is 1.31 inches.
How much wider are Rubicon axles?
The Rubicon axle is one inch wider. Both of these offer additional clearance for larger tires.
Can a Dana 30 handle 37s?
Jerry Bransford said: I wouldn't run 37's on a Dana 30 even with 30 spline alloy shafts and CTM u-joints. I won't run 37's on my front Dana 44 with 30 spline Superior Axle Evolution shafts and CTM u-joints. Those two axles share the same weaknesses... the same exact axle tubes, knuckles, bearings, ball joints, etc.
What jeeps came with Dana 44 axles?
1967–1973 Jeepster Commando and Commando.1974–1991 Wagoneer (Passenger side 1974-1979, Driver side 1980-1991)1974–1983 SJ.Late 1986 CJ-7.2003–2006 TJ Wrangler Rubicon (Front and rear)2007-2018 JK Wrangler Rubicon (Front and rear)2018-2019 JL Wrangler Rubicon (Front and rear)2020 JT Gladiator (Front and rear)More items...
Do Jeep rubicons have a Dana 44?
Yes. The JL Rubicon has Dana 44 axles front and rear.
What year jeeps came with Dana 44 axles?
In 2003, the highly anticipated Jeep Wrangler Rubicon rolled onto the scene with Dana 44 axles equipped with selectable air lockers. Though the TJ Dana 44s had advantages over the anemic Dana 30 and 35, it wasn't until the 2007 release of the Jeep Wrangler JK that the Dana 44 as we knew it was all but reinvented.
Can Dana 30 Handle 35 tires?
Brian, there is no definitive rule of thumb when it comes to running 35-inch tires under a JK with a Dana 30 front axle. Yes, you may twist your axle housing or explode the carrier running 35s, but you could do just the same running 33s.
What size tires go on a stock Rubicon?
285/70R17The JL Rubicon features 285/70R17 tires that measure out to about 33 inches in diameter. To fit the 33-inch tires, the Rubicon trim level comes with wider axles, a moderately different suspension than the Sport and Sahara models, and larger wheel openings thanks to factory raised fender flares.
What axles do Gladiators have?
2021 Jeep Gladiator Sport It is equipped with a heavy-duty Dana 44 solid front and rear axles that deliver exceptional strength, durability, and performance. The Gladiator Sport can handle all kinds of challenging terrain.
How wide are Dana 60 axles?
The 84.74-inch-wide axle (an F-350 front axle is 69.8 inches wide) was designed for the '05-and newer F-450 and F-550 Super Dutys, where it's rated to support 7,000 pounds of gross axle weight (GAWR) and cope with more than 600 lb-ft of engine torque.
What axle does a Rubicon Wrangler use?
The Rubicon Wrangler by Jeep used a Dana 30 or Dana 44 axle. The front assembly type depended on the model number of the SUV. The TJ and JK each have separate components that are unfortunately not interchangeable. When it comes to buying a used Rubicon front axle for sale, pricing is all over the place. Here at Axle Guys, we keep MSRP low ...
Can you take a Rubicon off the road?
In the case of the Rubicon, bending and flexing of the front shaft is what will lead to failure. It is not even a prerequisite to take a Jeep off road. Regular driving on roads that are less than perfect can bend the front axle beyond repair. A swap is the only way to remedy wheel related issues.