- Way 1. Use FixGo to Fix iPad Stuck on Apple Logo Loop
- Way 2. Check Lightning Cable and USB Port
- Way 3. Check Third-Party Software
- Way 4. Force Restart the iPad
- Way 5. Restore through iTunes
- Way 6. Restore Using Recovery Mode
How do I Turn on the Apple logo on my iPad?
Hold down the Power button and the Home button together until the device shuts down, then let go of both buttons when you see the Apple logo on the screen. If you have any iPad without a Home button:
Why is my iPad stuck on the Apple logo?
A lot of the time, issues with the logic board are the reason why your iPad gets stuck on the Apple logo. If your iPad is protected by AppleCare+, take it into your local Apple Store and see what they can do for you. Don’t forget to schedule an appointment first!
How to fix an iPad that is frozen on Apple logo?
Most of the time, you can favorably upgrade the firmware to fix an iPad that's frozen on Apple logo via iTunes or Finder. But if the device is no longer recognized in iTunes or Finder, you'll need to utilize the Recovery mode to get it updated.
Where can I get my iPad repaired without AppleCare+?
If your iPad isn’t covered by AppleCare+, or if you just want to get it fixed immediately, we recommend Puls, an on-demand repair company. Puls will send a certified technician directly to you and they’ll repair your iPad on-the-spot (sometimes for cheaper than Apple)!
Why does my iPad show the Apple logo but wont turn on?
The reason why it gets stuck in a loop is because the IPad was not shut down manually, so therefore keeps trying to boot up soon as it has some battery power. Problem is, its gone beyond a point and now and there isn't enough battery life to boot to main or home screen after apple logo.
Why is my iPad stuck on the loading screen?
The first method for fixing the iPad that is stuck on the loading circle is to force restart it. You should do the following things: Just press and hold the “Home” and “Power” buttons at the same time. Don't release the buttons until your iPad has restarted itself.
How do I fix my iPad stuck in the reboot loop?
First solution: Forced restart your iPad Pro.Quickly press and release the Volume Up button.Quickly press and release the Volume Down button.Then, press and hold the Power button until the Apple logo appears.
Why is my iPad screen white with the Apple logo?
If you see the Apple logo on the screen and it refuses to budge, then there is probably a software issue that is preventing the tablet from completing the startup process as it normally would. If you have installed third-party security software on the iPad, that could also be a cause.
Why Is My iPad Stuck On The Apple Logo?
Your iPad is stuck on the Apple logo because something went wrong during its reboot process. During the process when your iPad turns on, it has to complete simple tasks like checking its memory and turning on its processor.
Hard Reset Your iPad
A hard reset forces your iPad to abruptly turn off and back on, which will usually fix the problem if your iPad has frozen on the Apple logo. Press and hold the power button and the Home button simultaneously until the Apple logo appears. Then, let go of both buttons.
Problems With Third-Party Software
Sometimes third-party software installed on your computer can interrupt the process when you’re trying to transfer data to or update your iPad. It’s possible that your iPad got stuck on the Apple logo because that process was interrupted.
Check Computer USB Port & Lightning Cable
If your computer is working just fine and no third-party app is interfering with a data transfer or update process, take a look at your computer USB port and your Lightning cable. Either one could be the reason why your iPad is getting stuck on the Apple logo when you plug it in.
Put Your iPad In DFU Mode & Restore
The DFU restore is the most in-depth restore you can do on an iPad. All of the code controlling your iPad’s hardware and software gets erased and reloaded like new. Before performing a DFU restore, we recommend saving a backup so you don’t lose any of your important data after the restore is complete.
Repairing Your iPad
If your iPad is still freezing on the Apple logo after you’ve performed a DFU restore, it’s probably time to explore your repair options. A lot of the time, issues with the logic board are the reason why your iPad gets stuck on the Apple logo.
No Longer Stuck!
Your iPad has rebooted! Next time your iPad is stuck on the Apple logo, you’ll know exactly how to fix the problem. If you have any other questions about your iPad, leave us a comment down below.
First Thing First: Why Is My iPad Stuck on the Apple logo
This problem relates primarily to several common causes summed up as follows:
Solution 2 - Put iPad into Recovery Mode
Updating to the latest iOS or iPadOS software version could also help get around the issue. This action offers effective remedy for underlying settings bugs or software conflicts in an earlier operating system version. Most of the time, you can favorably upgrade the firmware to fix an iPad that's frozen on Apple logo via iTunes or Finder.
Solution 3 - Run a Powerful Troubleshooter
From rectifying over 50 kinds of iOS & iPadOS system glitches, to offering solid firmware database for upgrading or downgrading iDevice operating system, iOS System Recovery is an excellent program to have in your kit for handling an iPad that's locked or stuck at the Apple logo.
Solution 4 - Restore from DFU Mode
Like with any other iDevice troubleshooting guide, DFU restore is always listed the bottom of fixing software-based issue. As it'll reset everything back to its default state - erase all your photos, messages, app data, settings, etc.
Solution 5 - Consult Apple to Fix iPad Stuck on Apple logo
Hardware failure rarely poses threat on an iPad to lead to the freezing Apple logo with black or white screen during startup, restoring or updating, but it doesn't mean that it won't.
Why Is My iPad Stuck on the Apple Logo?
During a routine reboot, your iPad goes through several processes – checking the hardware and software for successful operation when the reboot is complete.
How to Fix iPad Stuck on Apple Logo Loop?
A capable third-party iOS repair tool like iToolab FixGo can be your friend if the above methods do not work. FixGo by iToolab is capable of fixing 200+ common iOS issues while being easy to use and helping prevent data loss.
Conclusion
If your iPad is stuck on the Apple logo during boot, there is no need to panic. First, try all of these fixes and in most cases, your issue should get sorted out without needing a visit to an Apple Repair center. Make sure to follow these instructions carefully and carry out the processes mentioned without missing a step.
1 Force Restart iPad
One of the ways you can fix the iPad stuck on the Apple logo is by force restarting the iPad. There are several ways to force restart an iPad depending on the generation of your iPad. Here is how:
2 Remove Third-Party Security Software
Another way to fix iPad frozen on Apple logo issue is by removing the third-party security software on your computer. Your iPad may be stuck on the Apple logo as a result of third-party software that is installed on your computer.
3 Check Computer USB Port and Lightning Cable
You can also see if maybe the problem is with your computer USB port or the iPad lightning cable. One of the others may be causing your iPad to get stuck on the Apple logo while you connect it.
4 Fix iPad Stuck on Apple Logo with Wootechy iPhixer
Another way to fix the issue when your iPad is frozen on the Apple logo is by using the help of professional repair tools such as Woothechy iPhixer. The tool is very easy for you to use. And through several steps, it can fix your iPad stuck on Apple logo without causing any data loss.
5 Restore Your iPad in Recovery Mode (Data Loss)
If your iPad is still stuck on the Apple logo even after you tried the methods above, then you have no other choice left but to restore your iPad in Recovery Mode. It should be noted that this will erase all data on your iPad. There are different ways to put the iPad into the Recovery Mode depending on the generations.
6 Restore iPad in DFU Mode (Data Loss)
The last resort is putting your iPad into DFU mode. By restoring your iPad into DFU mode, you will erase all of your data on your iPad. So before you do this, please make sure you have backed up all your data, otherwise, you will lose them and must start over.
On your iPad without a Home button
Press and quickly release the volume button closest to the top button.
On your iPad with a Home button
Press and hold both the Home button and the top button until you see the Apple logo.
