Connect the end coming from the radio plug to a new wire going to the amp's input. Connect the end going to the speakers to the appropriate wire coming from the amp's output. That means you'll use two of the 9-wire cables, one for the amp's input, the other for its output.
Full Answer
How do you hook up a converter to a factory radio?
0:398:28How To Install a Line Output Converter (LOC) To Any Car (Simple)YouTubeStart of suggested clipEnd of suggested clipSo for this install you're going to need your line output converter I would recommend picking upMoreSo for this install you're going to need your line output converter I would recommend picking up electrical buck connectors. And electrical wiring cutter. So you can splice your wires.
Can you wire SUBS to a stock radio?
Adding a subwoofer to a factory stereo is an excellent method to boost your sound while retaining your factory controls. The nifty devices can produce bass and sub-bass sounds at low frequencies. Thankfully, it's pretty simple to wire one into an existing car stereo system.
Can you hook a sub up to a factory radio?
So now you know – it's definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good. If you'd like to know more about how to get a killer system set-up in your car without swapping your stereo, give us a call at 510-527-9888.
How do you hook up RCA wires to a stock radio?
0:126:03How to add RCA Pre out adaptor to a factory car radio guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it's part number pc2 so one and what that is is basically it's got speaker wires on one end withMoreAnd it's part number pc2 so one and what that is is basically it's got speaker wires on one end with an earth and RCA connectors on the other end that you can plug your RCA cables into.
Do I need to bypass factory amp?
By bypassing the factory amplifier, the music sounds more detailed and clear than it did when he used the amplifier integration harness. Whenever there's one available, we recommend bypassing the factory amp to get better sound. If you're considering a new stereo for your vehicle, keep this option in mind.
Do you need a line output converter for subwoofer?
A: Yes, definitely. Amplifiers that offer speaker-level inputs don't require a separate line output converter to tap into existing speaker wires to get their signal. Many powered subwoofers offer this feature, too. The speaker-to-line level conversion is done inside the amplifier.
How do you hook up subs to a factory car stereo?
As shown in the diagram below, to receive an input signal from your factory car stereo you would just need to tap into your rear speaker wires. Then, you would run RCAs from your LOC to your amplifier. Finally, connect your subwoofer to the amplifier using speaker wire as you would normally.
Can you wire an amp to a stock radio?
Another popular way to connect an amplifier to a factory radio is to use something called a line output converter. It connects to the factory radio's speaker wires and converts the speaker-level signal to a preamp-level signal. This lets you use RCA cables to run that signal to your amplifier.
How do you hook up an aftermarket amp to a factory radio?
4:498:28How to install an amplifier to factory radio - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis side that's coming from the radio will be going towards our line output converter. And thisMoreThis side that's coming from the radio will be going towards our line output converter. And this side that goes towards the speaker will be hooked up to our 4-channel amp. This is the wire that I'm
Where do you connect the remote wire on a stock radio?
2:275:08How to: Wire an amp w/ Stock Radio - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd now they give you a remote out source the remote out wire will plug in to the remote wire inMoreAnd now they give you a remote out source the remote out wire will plug in to the remote wire in your amp. So whenever this line up converter gets a signal.
What are the RCA jacks on the back of my car stereo for?
RCA jack (line-level) connections RCA cables (line-level connections) are the preferred way to connect a signal to your amp if you have that option. RCA jacks on the rear of a Pioneer head unit. This is the ideal way to connect your amplifier's signal inputs, if available.
How do you hook up a line out converter to rear speakers?
0:043:07how to install a loc - line output converter in 3 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne will be a solid color and one will have the black stripe the solid color will go to the positiveMoreOne will be a solid color and one will have the black stripe the solid color will go to the positive side of the speaker that we're tapping into the one with the black stripe goes to the negative.
Engine Compartment Fuse Block
The engine compartment fuse block is located on the driver side of the vehicle, near the battery.
Instrument Panel Fuse Block
The instrument panel fuse block is located on the underside of the driver side instrument panel.