Apply Birchwood Casey Gun Stock Wax directly on wood, metal or leather surfaces in a thin, even coat. 2 Polish and rub until thoroughly dry 3 Repeat steps 1 and 2 until desired luster is obtained.
Full Answer
How do you Polish a gun stock with Birchwood Casey?
1 Polish with Birchwood Casey Stock Sheen & Conditioner after waiting at least 7 days after applying your last coat of Tru-Oil Gun Stock Finish. Stock Sheen & Conditioner effectively removes any surface imperfections and leaves your stock with a satin finish 2 Repeat applications as desired for a softer matte finish.
When can I apply Birchwood Casey gun stock wax after Tru oil?
1 Wait at least 7+ days after your last coat of Tru-Oil before proceeding. Apply Birchwood Casey Gun Stock Wax directly on wood, metal or leather surfaces in a thin, even coat.
How do you use Casey gun stock wax?
1 Wait at least 7+ days after your last coat of Tru-Oil before proceeding. Apply Birchwood Casey Gun Stock Wax directly on wood, metal or leather surfaces in a thin, even coat. 3 Repeat steps 1 and 2 until desired luster is obtained.
How do you use Birchwood Casey Perma blue?
1 Apply Birchwood Casey Perma Blue® Paste or Liquid Gun Blue with an applicator swab over the entire surface to be blued. Work as quickly as you can, but remember to be thorough. Rather than blueing the entire surface at one time, you may want to divide the work into 2 or 3 sections. 2 Allow the blueing to stand on the metal for 30-60 seconds.
How many coats of Tru-oil are on a gun stock?
Then just oil-dry-buff until you get your desired finish. As little as two coats can make a durable glossy finish, but I like to take it out to 4-6 or even 8 for a deep luster.
Should I oil my gun stock?
It is important to clean your shotgun after each use to remove any moisture, unburnt powder or dirt. Gun oil should be used sparingly as excess oil or cleaner can damage the stock.
What is the best oil to use on a gun stock?
Tru-Oil® Gun Stock Finish has been the professional's choice for gun stock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age.
Is Birchwood Casey Tru-oil good?
All in all, TruOil is among the best looking, most durable and easiest to work with DIY finishes out there! Highly recommended! 5.0 out of 5 stars My Absolute FAVORITE Finish for Gun Stocks, Guitar Parts, Furniture and More! I absolutely LOVE Birchwood Casey's TruOil!
Is beeswax good for gun stocks?
Reviving gun stock shine Instead buff the wood up with a spot of beeswax furniture polish (don't use synthetic spray polish) on a clean soft cloth. A very small amount of beeswax will do. On the other hand if the stock was finished with oil then you can restore it with some stock oil.
Can you put linseed oil on a gun stock?
Boiled linseed oil is more often used on bare wood and is popular for finishing gun stocks, as the process of heating it decreases its drying time. When hand rubbed into wood, it creates a durable weatherproof seal and the heat produced from the friction of rubbing produces a deep, polished finish.
Should you put gun oil in the barrel?
Improper care of your rifle, shotgun, pistol, or other firearms may result in it malfunctioning and/or rusting. While cleaning the outside of a gun is routine knowledge among gun owners, you're not alone in asking, “Should I oil the inside of my gun barrel?” The answer is, yes, but make sure you're doing it correctly.
Does gun oil prevent rust?
Conversely, a dedicated gun oil acts as a long-lasting rust-resistant lubricant, and it doesn't evaporate.
Does REM oil damage wood stock?
No, you can't use Rem Oil on wood. Gun oil will ruin the wood. Not at once. But over the years it will soak in and make the wood soft and punky. It usually happens where the stock meets the receiver.
Does Tru oil darken wood?
Re: Darkening Finish After Tru Oil However, very likely to will darken with age and exposure to light.
How long does Tru oil take to dry?
Tru-Oil takes about 2-4 hours to dry enough for a second coat. This is longer in humid and cold places, and shorter in warm dry places. After a couple hours, lightly touch the piece. You should be able to slide a finger around without sticking.
Can you add color to TRU oil?
2:5713:16Tinting Tung or Tru Oil With Wood Dyes - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt then use your tinted. Over the top of it and then maybe like one or two clear coats over the topMoreIt then use your tinted. Over the top of it and then maybe like one or two clear coats over the top of that to give it a little bit added depth and dimensioning.
Sand the Stock
First, remove the stock from your rifle. It is much easier to handle the stock during the refinishing process if it has been taken off first, and this will prevent any accidental damage to the barrel or action as well.
Apply Filler
Once you have sanded off the old finish, look for any remaining scratches or gouges. If there are any, fill those in with a wood filler.
Apply Walnut Stain
Often, by adding some water to a walnut stain, the stain will dilute for a lighter colored stain. To get the color that you want, just add water and spot test the stain on a piece of scrap wood until the right consistency is achieved. If you decide you like the darker stain, no water is necessary.
Apply Tru-Oil
Birchwood Casey Tru-Oil is sometimes easier to apply to your rifle stock using bare fingers. Tru-Oil can also be poured into a small paper or plastic cup to keep the oil from skinning over, making it easier to apply one drop at a time. After finishing your first coat, hang your stock to dry for 24 hours. A few additional tips:
Rinse and Repeat
After your stock has dried, rub it down with extra fine sandpaper or fine steel wool. Again, this removes any dust that settled and will help remove oil runs. Repeat steps 4 and 5 several times until 4 - 5 coats of Tru-Oil have been applied.
Satin Finish
After you have applied all the layers of Tru-Oil to get the finish you want, let your rifle stock cure for at least a week before adding a satin finish using the Stock Sheen & Conditioner.
What is Birchwood Casey Walnut Stain?
Birchwood Casey Walnut Stain is a water-based stain that will produce a clear, rich walnut color without grain clouding or smearing. 1 As a test to determine whether to stain or not, examine a portion of the wood while it is wet with water or alcohol.
How long does it take for a stock to dry?
3 Repeat steps 1 and 2 if grain is not completely filled. Let the stock dry for approximately 1-3 hours or until thoroughly dry.
