How to Remove AR 15 Stock Without Tool
- Step 1. The initial step is to detach the existing stock from its extension tube. To access everything in the next...
- Step 2. Now, take the buffer and spring out of the tube. Simply press down on the detent pin to release them.
- Step 3. As you remove the old extension tube, the rear takedown pin spring will be revealed. Slow down and...
Full Answer
How to break down an AR 15?
Unloading an AR Rifle
- Remove the magazine from the mag well.
- Lock the bolt to the rear.
- Visually and physically inspect the chamber.
- If a round is in the chamber, remove it.
- Release bolt and put the rifle on safe.
How to change AR15 stock?
- Better handling (more bench-friendly or faster to the shoulder);
- Superior accuracy (better bedding systems, more precise inletting than inexpensive wood or plastic);
- Improved stability (elimination of warpage) under more diverse conditions;
- Ability to hold a zero over a number of years;
- Better durability than average wood or plastic stocks.
How do you disassemble an AR 15?
How to Disassemble an Ar-15
- Remove the magazine from the weapon by pushing on the magazine release button and sliding the magazine out simultaneously.
- Pull the charging handle to the rear into its locked position, cocking the rifle, and look inside the feed chamber to ensure that no live ammunition is present ...
- Locate the rear take-down pin on the left side of the rifle. ...
How to disassemble an AR 15?
How To Disassemble and Clean Your SAINT AR-15
- First Steps. In the video at the top of the page, I discuss in detail basic firearms care/maintenance of the SAINT family of firearms.
- The Low Down. Keeping my rifle pointed in a safe direction, I must ensure that the rifle is unloaded. ...
- Onward and Upward. I will now move onto the upper receiver. ...
Can you take the stock off an AR 15?
1:051:58AR-15 Buttstock removal and replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipSomething that's got a little bit more width to it go right ahead all. You have to do is just simplyMoreSomething that's got a little bit more width to it go right ahead all. You have to do is just simply pull this out. And it'll come off and when you're going back in just reverse the process.
Can I change the stock on my AR?
4:376:28How to Change the Stock and Grip on an AR-15! (Super Easy!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now we are going to change the stocks the stocks really easy so you just press your release. PullMoreSo now we are going to change the stocks the stocks really easy so you just press your release. Pull all the way down on the this part and it should just slide right. Off.
What stock can I have on my AR pistol?
AR pistols are legal to own (in most states) and are regulated by the ATF the same as any other handgun. An AR pistol cannot use a standard rifle stock. You must use a pistol stabilizing brace.
What is the difference between mil spec and commercial buffer tubes?
The mil-spec tube threads—produced from 7075 T6 alloys—are rolled into the metal, resulting in taller and stronger threads. Commercial tube threads, on the other hand, are constructed from 6061 T6 billet aluminum and are cut into the metal, producing slightly shorter and weaker threads but at a lower cost.
How to Remove AR 15 Stock Without Tool
AR buttstock mounting systems are available in four basic designs. All four make use of an extension tube that protrudes from the back of the receiver and houses the recoil spring as well as the buffer itself. The confusion originates from the fact that systems exist in three lengths: A1 rifle, A2 rifle, and carbine.
Final Words
By now you must know that replacing AR 15 stock without a tool is super easy. You have to be steady and patient while doing it. Most of the guns require the same procedure. So now, there will be no problem changing the stock. If you find this article helpful, share this with your friends. And let us know if you have any queries.
Why you Might Want to Remove Your AR Stock
There are several reasons why you might to remove the stock on your ar style weapon.
Tools You Might Need
With the knowledge that swapping out or removing your AR stock is a task you can manage on your own, let’s explore some of the tools you may or will need to accomplish this.
Types of Stocks You are Likely To encounter
When dealing with an AR platform, they come with one of several types of stocks. For an AR this is almost always going to be either a fixed stock or a collapsible stock.
Removing a Traditional Stock
A fixed stock which you may think of as a traditional stock is what the original AR rifles were designed with. These feature a stock made of a specific size that is non-movable and does not have any adjustments.
Removing a Collapsible Stock
If you are removing the entire collapsible stock and replacing it with a different design or brand it may be necessary to follow the same steps listed above.
Removing the Buffer Tube to Swap a Collapsible Stock
There may be a time when you choose to replace the buffer tube along with your adjustible butt stock. This may be necessary in some cases where the new butt stock doesn’t fit on the old tube.
Cautions and Legal Considerations
While you can remove the stock from your weapon, and even fire it so long as the buffer tube remains you must be aware of the overall length of the gun. Federal regulations require that any rifles be at least 25 inches in total length.
What are the advantages of AR-15 stock?
One of the big advantages of the AR-15 platform is that with certain stock designs, it can be readily adapted to shooters of various sizes. Not everyone is tall and lanky, and an adjustable stock can be a real boon. An adjustable stock also makes it more compact for storage or for transport. The latest are what are called “PDW” (Personal Defense Weapon) stocks, which collapse down to an even more-compact size than the originals. But, how do you install carbine adjustable stocks, and what are the costs of such compactness?
How to get buffer out of receiver?
With the upper receiver off the lower, take a small, bladed screwdriver, and with one thumb over the buffer weight in the tube, press down on the retaining plunger you see poking up in the buffer’s path. When the plunger moves down enough, the buffer itself can—and will try to—move out of the tube. Restrain it, remove it and put it and its spring in a box where you’ll also be saving the old stock. These parts cannot be used with the new stock to come.
How to remove buffer retainer?
First, try simply wringing it off with your bare hands. If that fails, place the receiver flat on its right side on the bench top, with the pistol grip pointing toward you. Use a crescent wrench to grab the wrench flats on the end of the tube. Press the receiver down with your left hand, hard, and then use the wrench to break the tube free. Once it turns, put the wrench down. Put your thumb back over the buffer retainer, and spin the tube off of the receiver.
How long is a PDW stock?
(So, make sure you know and follow the federal and local laws concerning SBRs.) To stay over the 26-inch minimum overall length, you only need an extra 2.5 inches from your stock. All of the models covered here do that, so you can add a PDW-style stock to your carbine while your SBR paperwork is going through.
How to remove stock from extension tube?
It really helps to use a magazine-well vise block. You can find one at Brownells. Trust me, it’s well worth the money. Once you have it, you’ll find it makes maintenance chores like cleaning much easier. By lifting the adjustment lever, you can slide the stock completely off the extension tube.
How to install a buffer and spring on a rifle?
To install, just reverse the removal process. Hold the detent pin down while inserting the spring and buffer into the extension tube. Once you push the buffer past the pin, let the pin go, and it should hold the buffer and spring captive inside of the extension tube.
What is the size of the buttstock tube on an AR?
The confusion comes from the fact that there are three lengths of systems: A1 rifle, A2 rifle, and carbine. To add insult to confusion, carbine extensions come in two different diameters, mil-spec and commercial. Mil-spec tubes are 1.148 inches in diameter while commercial are 1.168 inches. Fortunately, when it comes to the buffer insert itself, there are only two lengths: rifle and carbine.
Why does my buffer detent spring pop out?
The buffer detent pin and spring may pop out as you begin to loosen the tube itself. The extension tube actually holds this pin in place, so loosen the tube slowly while covering the pin and spring with your finger. There’s one more spring you have to worry about losing.
How big is a carbine extension?
To add insult to confusion, carbine extensions come in two different diameters, mil-spec and commercial. Mil-spec tubes are 1.148 inches in diameter while commercial are 1.168 in ches. Fortunately, when it comes to the buffer insert itself, there are only two lengths: rifle and carbine. To explain this a little better and show you how ...
How much force do you put on an AR extension tube?
Most AR tools have a cutout where you can attach a torque wrench like the one shown here. Tighten the extension tube with about 35 foot-pounds of force. Once the tube is installed, you can just slide the new buttstock into place.
Does Mys Rock River Arms LAR 68 have carbon fiber?
Now we’ re finished. Mys Rock River Arms LAR-68 now has a fixed carbon fiber stock. Inside, we’ve replaced the carbine-length tube, buffer, and recoil spring with rifle-length versions of the same. It’s a nifty little upgrade that’s not too hard if you have or can borrow the right tools. Once you understand the differences between rifle- and carbine-length systems, it’s a pretty easy process.
