How to Remove AR 15 Stock Without Tool
- Step 1. The initial step is to detach the existing stock from its extension tube. To access everything in the next...
- Step 2. Now, take the buffer and spring out of the tube. Simply press down on the detent pin to release them.
- Step 3. As you remove the old extension tube, the rear takedown pin spring will be revealed. Slow down and...
Full Answer
How to break down an AR 15?
Unloading an AR Rifle
- Remove the magazine from the mag well.
- Lock the bolt to the rear.
- Visually and physically inspect the chamber.
- If a round is in the chamber, remove it.
- Release bolt and put the rifle on safe.
How to change AR15 stock?
- Better handling (more bench-friendly or faster to the shoulder);
- Superior accuracy (better bedding systems, more precise inletting than inexpensive wood or plastic);
- Improved stability (elimination of warpage) under more diverse conditions;
- Ability to hold a zero over a number of years;
- Better durability than average wood or plastic stocks.
How do you disassemble an AR 15?
How to Disassemble an Ar-15
- Remove the magazine from the weapon by pushing on the magazine release button and sliding the magazine out simultaneously.
- Pull the charging handle to the rear into its locked position, cocking the rifle, and look inside the feed chamber to ensure that no live ammunition is present ...
- Locate the rear take-down pin on the left side of the rifle. ...
How to disassemble an AR 15?
How To Disassemble and Clean Your SAINT AR-15
- First Steps. In the video at the top of the page, I discuss in detail basic firearms care/maintenance of the SAINT family of firearms.
- The Low Down. Keeping my rifle pointed in a safe direction, I must ensure that the rifle is unloaded. ...
- Onward and Upward. I will now move onto the upper receiver. ...
Can you take off the stock on an AR 15?
1:051:58AR-15 Buttstock removal and replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipSomething that's got a little bit more width to it go right ahead all. You have to do is just simplyMoreSomething that's got a little bit more width to it go right ahead all. You have to do is just simply pull this out. And it'll come off and when you're going back in just reverse the process.
Can I change the stock on my AR?
4:376:28How to Change the Stock and Grip on an AR-15! (Super Easy!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now we are going to change the stocks the stocks really easy so you just press your release. PullMoreSo now we are going to change the stocks the stocks really easy so you just press your release. Pull all the way down on the this part and it should just slide right. Off.
What stock can I have on my AR pistol?
AR pistols are legal to own (in most states) and are regulated by the ATF the same as any other handgun. An AR pistol cannot use a standard rifle stock. You must use a pistol stabilizing brace.
What is the difference between mil spec and commercial buffer tubes?
The mil-spec tube threads—produced from 7075 T6 alloys—are rolled into the metal, resulting in taller and stronger threads. Commercial tube threads, on the other hand, are constructed from 6061 T6 billet aluminum and are cut into the metal, producing slightly shorter and weaker threads but at a lower cost.
Why you Might Want to Remove Your AR Stock
There are several reasons why you might to remove the stock on your ar style weapon.
Tools You Might Need
With the knowledge that swapping out or removing your AR stock is a task you can manage on your own, let’s explore some of the tools you may or will need to accomplish this.
Types of Stocks You are Likely To encounter
When dealing with an AR platform, they come with one of several types of stocks. For an AR this is almost always going to be either a fixed stock or a collapsible stock.
Removing a Traditional Stock
A fixed stock which you may think of as a traditional stock is what the original AR rifles were designed with. These feature a stock made of a specific size that is non-movable and does not have any adjustments.
Removing a Collapsible Stock
If you are removing the entire collapsible stock and replacing it with a different design or brand it may be necessary to follow the same steps listed above.
Removing the Buffer Tube to Swap a Collapsible Stock
There may be a time when you choose to replace the buffer tube along with your adjustible butt stock. This may be necessary in some cases where the new butt stock doesn’t fit on the old tube.
Cautions and Legal Considerations
While you can remove the stock from your weapon, and even fire it so long as the buffer tube remains you must be aware of the overall length of the gun. Federal regulations require that any rifles be at least 25 inches in total length.
How much force do you put on an AR extension tube?
Most AR tools have a cutout where you can attach a torque wrench like the one shown here. Tighten the extension tube with about 35 foot-pounds of force. Once the tube is installed, you can just slide the new buttstock into place.
How big is a carbine extension?
To add insult to confusion, carbine extensions come in two different diameters, mil-spec and commercial. Mil-spec tubes are 1.148 inches in diameter while commercial are 1.168 in ches. Fortunately, when it comes to the buffer insert itself, there are only two lengths: rifle and carbine. To explain this a little better and show you how ...
Why does my buffer detent spring pop out?
The buffer detent pin and spring may pop out as you begin to loosen the tube itself. The extension tube actually holds this pin in place, so loosen the tube slowly while covering the pin and spring with your finger. There’s one more spring you have to worry about losing.
