Pour about 8 ounces into a 2 1/2 gallon metal bucket. Stand the stock in the bucket. Put on thick rubber gloves, and use a 2 1/2 inch paintbrush to coat the stock with the liquid. Coat the hand guards, too. Let sit for 30 minutes. Repeat the process with the paintbrush.
Full Answer
How do you stain gun stock finish?
3 If your stock has really tight grain with small pores, wipe it down with a tack cloth and you’re ready for staining or applying Tru-Oil® Gun Stock Finish. 1 First, remove what’s left of the stock’s original finish with an appropriate stripper (available from any hardware store). Follow the manufacturer’s instructions.
Should I stain my wood stocks?
Sometimes, however, stain should be applied, being needed for enhanced visual effect on dull, non-descript wood stocks. Sometimes a really dull wood appearance can be vastly improved with a little color. I’m glad to help you regarding stain application, from an experience standpoint.
What do you use to clean your gun stock?
Dirty worn out gun stock 2. Sandpaper (150 grit - 400 grit) 3. Wood Stripper 4. Degreaser 5. Wood Stain 6. Tru Oil 7. Stock Wax 8. Cheesecloth 9. Tools 10. Safety gear (gloves, eye protection) 11. Time and elbow grease Disclaimer: be safe and use common sense.
Should you refinish or re-do your gun stock?
Really, it comes down to whether you want to focus on the collectible dollar value, or re-do the stock and get a look for your own personal enjoyment. Keep in mind refinishing a stock can definitely increase the “perceived value” and even street value of any firearm, simply because it looks so much better.
Can you stain a rifle stock?
2 If the stock is relatively scratch-free, give it a gentle sanding with 120-grit, 180-grit, and finally 280-grit paper and polish with extrafine steel wool. Wipe with a tack cloth and go right to staining or applying Tru-Oil® Gun Stock Finish.
What is the best finish for a gun stock?
The best finish to put on a gun stock is an oil finish. It is easy to apply, durable and can be used on finished and unfinished wood. Oil finish is also water-proof, prevents UV light from damaging the wood, and can last for several years.
How many coats of Tru oil on gun stock?
As little as two coats can make a durable glossy finish, but I like to take it out to 4-6 or even 8 for a deep luster. For guns, I personally prefer the satin finish from buffing it out after the last coat, but then I'm a softy for that old-world look when I'm building a new rifle stock.
What oil for gun stock?
0:108:45Maintaining A Hand Rubbed Oil Finish Gun Stock: Caesar Guerini shotgunsYouTubeStart of suggested clipEnd of suggested clipWe're in the stockroom today and we're going to talk a little bit today about oil finishes care andMoreWe're in the stockroom today and we're going to talk a little bit today about oil finishes care and feeding if you will. So it's kind of two general types of finishes available for gunstocks there's
Can you use Minwax on a gun stock?
2:307:46How To- MinWax Wipe on Poly Gun Stock application Part 4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt. Just working it making sure that you're getting everywhere. And this wipe on you can go back aMoreIt. Just working it making sure that you're getting everywhere. And this wipe on you can go back a little bit if you see that you've got like a uh a bigger spot.
Is linseed oil good for gun stocks?
Boiled linseed oil is more often used on bare wood and is popular for finishing gun stocks, as the process of heating it decreases its drying time. When hand rubbed into wood, it creates a durable weatherproof seal and the heat produced from the friction of rubbing produces a deep, polished finish.
How long should you wait between coats of Tru Oil?
Both of these factors encourage a finish to dry quicker. Tru-Oil takes about 2-4 hours to dry enough for a second coat. This is longer in humid and cold places, and shorter in warm dry places. After a couple hours, lightly touch the piece.
Will Tru oil darken wood?
Re: Darkening Finish After Tru Oil However, very likely to will darken with age and exposure to light.
Is Tru oil the same as tung oil?
The main difference between tru oil and tung oil is that tru oil can give a harder, more varnish-like finish, while tung oil lets you experience the natural feel of the wood.
Should I oil my gun stock?
It is important to clean your shotgun after each use to remove any moisture, unburnt powder or dirt. Gun oil should be used sparingly as excess oil or cleaner can damage the stock.
Is beeswax good for gun stocks?
Reviving gun stock shine Instead buff the wood up with a spot of beeswax furniture polish (don't use synthetic spray polish) on a clean soft cloth. A very small amount of beeswax will do.
What is the best wood for gun stocks?
The most desired wood for gun stocks is walnut. However, there are other woods that can be used for gun stocks that are both beautiful and functional. There are a variety of companies that sell stocks for finishing, but stocks can also be hand-crafted from a commercial blank or from rough wood.
What does street value mean on a firearm?
The street value may mean something or nothing to you. As well, an extremely valuable firearm may be perceived of lesser value if modifications, including gunstock refinishing, are made to it. Really, it comes down to whether you want to focus on the collectible dollar value, or re-do the stock and get a look for your own personal enjoyment.
What is the slowest finish to remove?
Home-finishes, varnish, polyurethane , even shellac, and factory epoxy are common. Removal time and technique involved varies by the chemical nature of the finish and how strongly it’s bonded to the wood. Polyurethane seems to be the most common and can be the slowest to remove, depending on the manufacturer.
How long does it take for oil based finish to dry?
Sometimes up to 10, even more coats are needed to achieve deep, lustrous beauty. Drying time between coats is at least one day. Drying times also vary, depending on humidity.
Can you remove gun oil from wood?
Gun oil stains in wood: These are difficult to remove. Many can be removed completely, but not always. The severity and depth of the stain, type of oil that created it, and how long it’s been there are crucial factors. Some oil stain residue simply can’t be completely removed.
Does rubbing oil make wood grain pop?
In so doing, it reveals the true grain inherent in the wood. Rubbing oil penetrates, making the grain ‘pop!’. The penetrating oil also deepens contrast between light and dark wood fibers (grain), revealing the full beauty of the pattern. (And therein lies the ‘rub’ of hand-finishing.
Does refinishing a stock increase the value of a firearm?
Keep in mind refinishing a stock can definitely increase the “perceived value” and even street value of any firearm, simply because it looks so much better. I’m not referring to the collectability value of the firearm here, only to what others may be willing to pay for your gun should you want to sell it.
What to do after stripping stock?
After stripping your stock, it still will have some old stain and grease trapped in its pores. To correct this start boiling some water ( be careful!) then use a de-greaser of your choice. I used "Krud Cutter" because it is biodegradable and it lathers the wood in a nice coat of suds.
How to make a wood stock look like a glop?
First lightly sand your stock so that you get some sawdust residue, then mix your epoxy with the sawdust until it looks like a glop of gooey wood mud. Use a tooth pick to push your new wood muck into the crack completely, then use a clamp of some sort to push the wood together and hold it there.
How long to boil stock in hot water?
Cover your utility sink with a towel and allow your stock to float in the hot water for about 5 min before flipping it to the other side. Keep doing this until the water is lukewarm.
How long does Tru oil dry on wood?
The first coat the wood should soak up fairly quickly, which is wonderful! Allow the tru oil to dry for 8 hrs. Once you get back from an 8 hour pizza run, be sure to lightly sand the surface with some steel wool, and apply another layer of tru oil.
How to sand a gun stock?
1 Following final tooling on a new gun stock, begin sanding with a medium to coarse paper. 120 is typically enough grit to remove material quickly without being too aggressive. Always sand with the grain whenever using an abrasive.
How to apply Tru Oil gun stock finish?
If darker than desired, sponge wood with clear water. If lighter than desired, add more stain. 4 Allow the Walnut Stain to dry overnight before applying Tru-Oil® Gun Stock Finish.
What is Birchwood Casey Walnut Stain?
Birchwood Casey Walnut Stain is a water-based stain that will produce a clear, rich walnut color without grain clouding or smearing. 1 As a test to determine whether to stain or not, examine a portion of the wood while it is wet with water or alcohol.
How to keep stock edges sharp?
To keep stock edges sharp and the wood’s surface ripple-free, always sand with a sanding block. The block will prevent the abrasive from “digging in” on soft spots in the grain. And remember to sand AROUND checkering to keep the checkered peaks crisp. Keep checkering masked off until final application of oil.
How to apply Birchwood Casey gun stock sealer?
1 Apply Birchwood Casey Gun Stock Sealer and Filler generously and directly to wood with brush or a clean, lint-free cloth. Do not over brush. Let dry for 60 minutes or until thoroughly dry.
How to apply Tru Oil to a gun?
1 First, apply Tru-Oil Gun Stock Finish to the entire stock and allow it to penetrate the grain. Don’t rub it in, just let the wood absorb it. When the stock has soaked up all it can absorb, wipe away the excess and let dry for 24 hours ( Read Carmichel’s Tip below).
How to sand metal surfaces?
When sanding metal surfaces, wrap the paper around a stiff, at backer like a file. In addition to reducing hand fatigue, it will keep surfaces at and edges crisp. 4 Whatever you do, don’t try and rush metal preparation. Keep polishing until everything looks right.
How to remove woodfill from stock?
With a piece of burlap or a coarse rag, remove the woodfill from the stock in a cross grain motion. Insure there is no woodfill left on the surface, or in the inletting. Allow 24 hours to dry. Using a soft brush, clear all the dust from the inletting area. Using the tack cloth, wipe debris from the stock.
How to remove scratches from wood stock?
Sanding with the grain, remove all rough wood and blemishes in your stock. Repeat this process with the 150 grit removing the 120 grit scratch pattern. Again, repeat this process with the 180 grit removing the 150 grit scratch pattern.
How long does it take for wood stock to dry?
Allow stock to dry for 12 hours. Using the 320 grit sandpaper, sand stock to a smooth finish. If you discover open pores in the wood, repeat step 9 and 10. Using a soft brush, clear all the dust from the inletting area. Using the tack cloth, wipe debris from the stock.
How to hang a stock in a dust free area?
Using a piece of wire, hang your stock in a dust free area, where the center of the stock is at shoulder level, or a height that insures you can easily spray all areas of the stock. Spray a coat of Polyurethane Satin Finish. (First read directions on can.) Allow stock to dry for 30 minutes. Repeat step 11.
How to hang a stock with buttplate?
If your stock has a buttplate, leave attached and you can finish the plate along with the rest of the stock. Using a piece of wire, hang your stock in a dust free area, where the center of the stock is even with your shoulders, or a height that insures you can easily spray all areas of the stock.
How to get rid of dark wood stain?
(Note when you are finished with the rags, soak in water, and dispose of in outside container.) In a circular motion, apply a coat of Woodfill.
How long does it take for a finish coat to dry?
Allow 15 to 20 minutes for finish to soak into material, and repeat step 6. Allow stock to dry for 12 hours. Repeat step 6, and while stock is still wet, ...
