Attach it to the vertical slot on the OUTSIDE of the stock with a tri-glide. So, if you are a right hander (which it appears you are from your pic) then attached the sling to the left side of the forearm and the right side of the stock.
Full Answer
Can the Moe rifle stock be used with a collapsible stock?
NOTE: The MOE Rifle Stock is a direct replacement for an A1 or A2 fixed stock. Fitting to a carbine with a collapsible stock will require a rifle-length receiver extension tube, rifle buffer and spring (not included).
What do I need to fit a collapsible stock to a carbine?
Fitting to a carbine with a collapsible stock will require a rifle-length receiver extension tube, rifle buffer and spring (not included).
What is Magpul’s export compliance policy?
Customers acquiring controlled goods, technical data and/or services from Magpul shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws. (See Magpul Compliance Notices page for more information). WARNING: Observe safe firearm handling practices at all times.
How do Slings attach to AR 15?
1:225:28Quick Tip: How To Mount a Sling on Your AR-15 - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the opposite side so it's going to be ejection port side if you're a right-handed shooter and i'MoreOn the opposite side so it's going to be ejection port side if you're a right-handed shooter and i'll get into why in just a moment here. So mount that there plugs right in qd.
Where do you mount a QD sling?
2:4212:41AR-15 Sling Setup Basics (2018 ver) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis one side I have it so this sling comes around on the injection port side since I am left-handedMoreThis one side I have it so this sling comes around on the injection port side since I am left-handed shooter you're gonna want the sling to be mounted on the other side of the stock.
How do QD sling mounts work?
0:223:58Magpul Slings - Part III : Sling Attachments - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use any combination of loops para Clips QD s or Uncle Mike swivels that you would like toMoreYou can use any combination of loops para Clips QD s or Uncle Mike swivels that you would like to place on your rifle as long as the attachments. You place on the sling match up.
What is the difference between Magpul MOE and CTR stock?
The Magpul CTR stock has the same basic design as the MOE, but with a few nice upgrades. It is nearly as light, weighing in at less than half a pound, and is the same size and has the same feel. The big difference is the addition of Magpul's friction lock system.
How tight should a rifle sling be?
2:175:34Sling Setup & 2 Reasons IT MATTERS - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when we're talking about sling length you want it as tight as you can get it to bring your gunMoreSo when we're talking about sling length you want it as tight as you can get it to bring your gun close to your body while you can still pick your gun up and get a sight picture.
How do you put on a sling?
1:352:59How to Make A Sling - First Aid Training - St John AmbulanceYouTubeStart of suggested clipEnd of suggested clipUnder. With the bit that's left over just twist it until it's nice and tight. And it fits snugly inMoreUnder. With the bit that's left over just twist it until it's nice and tight. And it fits snugly in by the elbow. To check circulation you need to squeeze the fingernail for five seconds.
Are QD sling mounts Universal?
QD Swivels are one of the most effective ways to attach slings to rifles. They tend to be quieter and quicker than Clash Hooks but aren't quite as universal.
Is magpul QD good?
As expected of Magpul, they make awesome products. I've ordered two of these so far, and have more I plan to get as well. They are simple, easy to use, and very sturdy. A perfect addition for any rifle or shotgun that needs a sling!
What is sling stud QD?
The Magpul Bipod – Sling Stud QD is the next offering in the Magpul bipod line. Designed to mount to the ubiquitous Uncle Mike's Sling Swivel Stud that is common to nearly every sporting rifle made, the Magpul Bipod – Sling Stud QD is the strongest, most fully featured bipod available with direct sling stud mounting.
Where to mount sling on Magpul MOE stock?
Looking at the pic below, do I attach my sling through the slot at 9 o’clock or 5 o’clock? I will attach the other part of my sling under the sling attachment near the bayonet lug. Thanks!
Re: Where to mount sling on Magpul MOE stock?
Depends on how you want to carry it. At the 9 o'clock would facilitate carry with the rifle side flat to your body. 5 o'clock for more "normal" carry. You can also probably find a sling swivel that will fit in that small opening at the 6 o'clock position, which again would be standard carry.
What is a Grovtec sling?
Grovtec makes many different adapters that can be used to outfit whatever style sling you want. They make quick detach type, and standard hunting type swivel attachment s for butt stocks. You can replace the large fixed loop with an adapter, then use push button swivels in the gas block, and rear mount.
Does Magpul have a quick disconnect?
The Magpul buttstock doesn't have this Quick Disconnect although I have noticed that most models of AR556 have a metal loop mounted on the heel of the buttstock to facilitate mounting a sling. What hardware do I need to mount a sling. C.
Product Details
The MSA (MOE Sling Attachment) attaches directly to MOE Hand Guards and Forends, providing a forward sling attachment point for the Magpul MS3® Sling and other clip-in sling systems. Like the RSA®, the MSA is constructed of durable, case-hardened steel and it's finished with Melonite™ for extreme resistance to wear and corrosion.
Resources
EXPORT NOTICE: This is an item controlled for export by the Export Administration Regulations (EAR) under the Commerce Control List (CCL). These controls take the form of export regulations and license requirements.
Product Details
The MOE Rifle Stock (Magpul Original Equipment) is a drop-in replacement for AR15/M16 A1 and A2 rifle stocks utilizing the standard rifle-length receiver extension (buffer tube).
Resources
EXPORT NOTICE: This is an item controlled for export by the Export Administration Regulations (EAR) under the Commerce Control List (CCL). These controls take the form of export regulations and license requirements.
