how to restore windows 7 back to original stock using command prompt

How to Perform a System Restore from Command Prompt Windows 7 Step 1. Press the Power button to turn on your PC. During the start process, press F8 key to open the Advanced Boot Options screen. Step 2. Select the Safe Mode with Command Prompt by pressing the arrow keys. After that, press Enter.

Full Answer

How do I perform a System Restore in Windows 7?

In Windows 7 and Windows Vista, click on the Start button. In Windows XP and earlier, click on Start and then Run. Type the following command in the text box or Command Prompt window: rstrui.exe. ...and then press the Enter key or press the OK button, depending on where you executed the System Restore command from.

How to restore Windows 7 from command line when it cannot boot?

When it comes to system restore with command line when Windows cannot boot, what comes to mind first is System Recovery Options Command Prompt in Windows 7. It is true. However, if you use “wbadmin start recovery” command, you will get the following error:

How do I restore Windows XP to a previous version?

In Windows XP and earlier, choose Run from the Start menu. Type the following command in the text box or Command Prompt window: rstrui.exe. ...and then press Enter or choose the OK button, depending on where you executed the System Restore command from.

How to backup and restore Windows 7 without booting Windows 7?

Connect the target disk to your Windows 7 if necessary. Note: To start command prompt without booting Windows 7, please boot the machine with Windows installation drive or system repair disk. Next, press Shift + F10 at the where-to-install page. Then, run following command to backup.

Can I factory Reset Windows 7 from CMD?

Step 1: Restart your computer and press F8 to enter the Boot screen. In the Advanced Boot Options, choose "Safe Mode with Command Prompt" and press Enter. Step 2: Log in as Admin and type the command- rstrui.exe. Hit enter and follow the wizard instructions to continue the system restore.

Can I factory Reset through Command Prompt?

Go to the Start menu search bar, type in 'command prompt,' and run it as administrator. In the Command prompt, type systemreset --factoryreset. Select the Keep my files and Remove everything option. Finally, click on Reset to begin the process.

How do I restore Windows 7 to original?

Step 1: Click Start, then select Control Panel and click on System and Security. Step 2: Select Backup and Restore displayed on the new page. Step 3: After selecting backup and restore window, click on the Recover system settings or your computer. Step 4: Select Advanced recovery methods.

How do I repair Windows 7 with Command Prompt?

If you don't have the installation discReboot the computer.Press F8 as the Windows 7 logo appears.Select Repair Your Computer. ... Hit Enter.Select Command Prompt.When it opens, type the necessary commands: bootrec /rebuildbcd.Hit Enter.

How do I restore Windows 7 to factory settings without a disk?

1) On your keyboard, press the Windows logo key and E at the same time to open the File Explorer.2) Right-click Computer, then select Manage.3) Click Storage, then Disk Management.3) On your keyboard, press the Windows logo key and type recovery. ... 4) Click Advanced recovery methods.5) Select Reinstall Windows.More items...•

How do I Reset my PC to its factory settings?

Answer: Press the ''F11'' or ''F12'' key when you restart the system. Select the option to reset to factory settings. The system will then boot itself with restored factory settings.

What is Fixboot command?

The fixboot command is a Recovery Console command that writes a new partition boot sector to the system partition that you specify. This command is only available from within the Recovery Console in Windows 2000 and Windows XP.

How do I use Command Prompt to fix my computer?

Open "Start", search for the Command Prompt, select it and run as administrator. 2. Then type the command: "sfc /scannow" and press "Enter". If SFC is unable to fix the problem, probably the utility cannot get the necessary files from the Windows image, which might have become broken.

How do I fix a corrupted Windows 7?

Type cmd in the search box, right-click it and select Run as administrator. Step 2. In the command prompt window, type sfc/scannow and hit Enter to excute this repair process. After scanning, you will receive one of the following messages, which will tell you if the corrupted boot files are repaired.

How to repair Windows 7?

In the System Recovery Options window, click the version of the Windows 7 operating system that you want to repair, and then click Next. In the System Recovery Options window, click Command Prompt . The Command Prompt window opens, and it displays the command prompt.

How to install Windows 7 on a computer?

Step 2: Start the Windows Recovery Environment 1 Put the Windows 7 installation disc in the DVD drive, and then restart the computer. 2 Press a key when you are prompted to restart from the disc. 3 In the Install Windows window, select a language, a time, a currency, a keyboard input method or other input method, and then click Next. 4 In the Install Windows window, click Repair your computer. 5 In the System Recovery Options window, click the version of the Windows 7 operating system that you want to repair, and then click Next. 6 In the System Recovery Options window, click Command Prompt.

What does D mean in command prompt?

Type one of the following commands at the command prompt, as appropriate for your situation.#N#Note In the following commands, D: represents the DVD drive. If the DVD drive on the computer is represented by a different letter, such as E:, use that letter in the command.

Why is System Restore important?

System Restore is a great utility to help "roll back" Windows to an earlier state, undoing any system changes that may have caused an issue . Sometimes, however, a problem is so bad that your computer won't start normally, meaning you can't run System Restore from inside Windows. Since System Restore is a such a great tool to use to fix problems ...

How long does it take to restore a system?

It'll take you less than a minute to execute the System Restore command, and, in total, probably less than 30 minutes for the whole process to complete. Open Command Prompt, if it's not already open. As you read above, you're more than welcome to use another command line tool, like the Run box, to execute the System Restore command. ...

How to run a command in Windows 10?

In Windows 10 and Windows 8, open Run from the Start menu or Power User Menu. In Windows 7 and Windows Vista, select the Start button. In Windows XP and earlier, choose Run from the Start menu. Type the following command in the text box or Command Prompt window: ...and then press Enter or choose the OK button, depending on where you executed ...

How to Perform a System Restore from Command Prompt Windows 7

Step 1. Press the Power button to turn on your PC. During the start process, press F8 key to open the Advanced Boot Options screen.

How to Perform System Restore from Command Prompt Windows 10

This process is similar to do on Windows 7. Before you do, you can read this post to boot your Windows 10 PC from Safe Mode. After that, you can follow the steps below to perform the Windows 10 system restore from command prompt.

Tips & Tricks for the Problems When Performing System Restore from Command Prompt

In addition to the above question, many users encounter new problems when running system restore from command prompt. For example, a user received the error message “not enough memory resources are available to process this command”. For this problem, you can try freeing up your PC’s storage space.

How to open command prompt in Windows 10?

Open Command Prompt from the Run Box. Press Windows+ R to open “Run” box. Type “cmd” and then click “OK” to open a regular Command Prompt. Type “cmd” and then press Ctrl+Shift+Enter to open an administrator Command Prompt. 421 views.

How to repair a Windows 10 laptop?

Step 1. Boot the laptop using the installation disk. When the following screen appears, click on “Repair your computer” from the lower left-hand corner. Step 2. Click Command Prompt. Step 3. When a window of Command Prompt appears, type "copy c:windowssystem32sethc.exe c:" and press Enter.

How to open a file in Windows 10?

Method 1: Open My Computer Or File Explorer. In that Window go to the Address bar. Delete everything and type “cmd”. Hit enter. Now the command prompt will be opened on that particular window file path. Method 2: Go to any folder in you machine and press + hold “Shift” Key then press right mouse click button.

How to reset Windows 7 to default?

Follow the screen guidelines and return Windows 7 to its default settings. Boot your computer with the use of a bootable CD. If you do not have one, create a reset disk in a perfectly working computer. Go to the "Advanced Boot Options" when you boot the computer and follow the on-screen lead to reset.

How to restore Windows 10 to factory settings?

Step 1: Restart your computer and press F8 to enter the Boot screen. In the Advanced Boot Options, choose "Safe Mode with Command Prompt" and press Enter . Step 2: Log in as Admin and type the command- rstrui.exe. Hit enter and follow the wizard instructions to continue the system restore. Or.

Why do you need to factory reset a computer?

You are going to sell or give your system to another, and a factory reset helps you to avoid privacy leaks. Restore your system to undo changes to your system. Your system has been running for a long time, and you can factory reset to get rid of data stored on it to attain better performance.

Does Recoverit scan all around?

By default, Recoverit will perform an All-Around Scan. It will take only a while to finish the scan if the file size is less. The software can "Pause" or "Stop" the scan at any point in time. The files will be listed on the screen by File Path or File Type.

How to backup Windows 7 from command prompt?

To backup Windows 7 files from command prompt when Windows fails to start, notepad is helpful as well. First ly, type notepad at the prompt and press Enter. Secondly, click File and then Open. Then, you’ll access to the Libraries interface. Next, you can find the files you need to back up.

How to restore system image one day?

Make sure you can access the backup image or you know the exact location of the backup image. 1. Open an elevated command prompt.

What group do you need to configure a backup?

To configure a regularly scheduled backup, you must be a member of the Administrators group . To perform all other tasks with this command, you must be a member of the Backup Operators or the Administrators group, or you must have been delegated the appropriate permissions.

Can wbadmin find backup?

Nevertheless, you may encounter wbadmin cannot start, wbadmin cannot find backup when restoring, or wbadmin systemstate backup fails, etc. If you unlucky to facing one of those troubles, it is wise to turn to another powerful Windows 7 command line backup tool.