How to Repair a Cracked or Broken Shotgun Stock
- Remove the stock so you don't damage the metal and bluing of the shotgun. Take off the butt plate. ...
- Remove any tape or wrapping that may be on the stock. Thoroughly clean the area to be repaired. ...
- Make sure the cracked or broken piece is in the correct position. Use a high-quality wood glue to glue it in its place.
- Drill a pilot hole, slightly smaller in diameter than the wire brad nails, on each side of the crack or break.
- Place a small amount of the super glue on each brad nail, and slowly push them into the pilot holes.
How do you repair a broken stock on a shotgun?
Well, repairing a stock is pretty much the same concept, but with a few changes. Rather than nails, brass stock repair pins from Brownells will reinforce the stock and prevent it from splitting again. The idea is to pin the broken area as you glue it so that the brass pins will provide structural strength along the damaged area.
Can I buy a replacement stock instead of repairing it?
Sometimes these stocks are victims of improper repairs, other times, they’ve lingered away, forgotten about for years. While it may be possible to purchase a replacement stock, it will likely cost more money than simply repairing the stock you have.
How do you repair a split in a wood stock?
I prefer Brownells Acraglas Gel stock bedding compound for repairs on wood stocks. This is an epoxy gel that forms a very strong bond. It can be dyed to match the finish on the stock to further hide repairs. Coat both pieces or, if the stock is not completely broken, pry the split open being careful not to make it bigger.
How do you drill a hole in a broken stock?
Hold the broken pieces together making sure they are correctly aligned, and drill the holes for the pins. If you are going to drill all the way through, as opposed to a blind hole, care should be taken to make sure the drill runs true and is lined up correctly so it exits in the desired location on the opposite side of the stock.
Can a cracked gun stock Be Fixed?
0:101:37Fixing a Cracked Buttstock & Forend on a Remington Model 11 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll the oil must be removed over the glue won't stick. The first crack I'm going to repair is theMoreAll the oil must be removed over the glue won't stick. The first crack I'm going to repair is the one in the back of the four end I'm using a polyurethane glue.
What is the best glue to repair a gun stock?
Tim Inman: Epoxy is the only good answer for you. You can find specialty epoxies made for just your kind of troubles available from gunsmith suppliers. They are not “ordinary” epoxies, and they are quite expensive.
Can you glue a gun stock?
The first step it to take the gun apart so the stock is free and clear from the rest of the gun. Simply gluing the stock back together will not produce a strong enough repair and you must add some structural strength.
Can you use wood filler on a gun stock?
Basically, any thing be it a gun stock or furniture will have a similar procedure. You cut out / flatten the bad area, then glue, then shape it with new wood. It works on chips, holes, or if you had to cut out a rotten piece of something old. Don't use wood filler to repair chips!
Can you Epoxy a gun stock?
This is the process of using epoxy putty and PVC to create not only gun stock parts but simple 3D shapes that can be handled like 3D printed or wooden objects. These materials are very cheap to source and very easy to work with.
Is Minwax wood putty water based?
Minwax | Water-based | Wood Filler.
What is wood filler?
What Is Wood Filler? Wood filler is a suspension of a sandable material in a solution of hardening resin that has the ability to soak into wood fibers and bond with them. An example the ancients may have used — and one still used by woodworkers today — is a mixture of wood dust (cellulose) and lacquer, varnish or glue.
Can You Repair a Broken Gun Stock?
A busted gun stock does not mean the end of your gun. But yes, it is definitely heart-wrenching. Especially when your gun is expensive and has been a part of your shooting experience for years.
Useful Considerations
You may use the same repairing process to repair the small cracks in your gun stock. Also, as you use the clamp, place a cloth or a protective rag between the clamp and the wood to prevent the damage. However, you must be careful in using the glue. Make sure you apply it on the area that needs to be repaired and remove the excess glue later on.
What does it mean when a rifle stock is broken?
A broken rifle stock needn’t mean the end of the gun. A broken rifle stock is heart-wrenching, but it needn’t mean the end for that gun. While the repair may show, the stock will be very strong and the gun usable again. Sometimes the repairs can even add a bit of character to the rifle.
Do wood stock drill pins rust?
These pins will not rust and they look good on wood stocks, almost like they belong. Two or more pins are required for most repairs. They must be placed in sections of the stock that are solid and have plenty of material to accept them. Choose a drill that is just a few thousandths of an inch smaller than the pin.
What happens if a gun stock is broken?
Broken Stocks are a common problem encountered by Gunsmiths. After every hunting season, a parade of hunters bring broken stocks in for repair. Sometimes, the guns have been dropped out of tree stands. These are usually the worst cases. If the stock is the only damage incurred, these guns can be put back into service with a replacement stock. If a replacement stock is not available, the wooden stock must be repaired.
What are the voids in a gun made of?
The voids created (to epoxy the pins in place) are always made from the “inside” of the stock, so they are not visible on the outside surface.
Can you repair a stock that has been glued?
If an amateur has tried to repair the stock, a “re-repair” is almost impossible. Usually, a stock that has been glued before must have all old adhesive removed before a successful repair is begun. If any of the original glue remains, the second repair will adhere to the old glue joint.
