How to Remove AR 15 Stock Without Tool
- The initial step is to detach the existing stock from its extension tube. To access everything in the next steps, you’ll need to remove the upper receiver first.
- Now, take the buffer and spring out of the tube. Simply press down on the detent pin to release them.
- As you remove the old extension tube, the rear takedown pin spring will be revealed. ...
Full Answer
How to remove the stock from an AR-15?
A magazine-well vise block is really useful. Lifting the adjustment lever, you can entirely remove the stock from the extension tube. Now, take the buffer and spring out of the tube. Simply press down on the detent pin to release them. Using an AR armorer’s tool, carefully loosen the locking ring.
How do you remove the stock from an extension tube?
By lifting the adjustment lever, you can slide the stock completely off the extension tube. Now, remove the buffer and spring from the tube. Just press down on the detent pin and they will slide out. Carefully loosen the locking ring using an AR armorer’s tool.
How do you remove a stuck buffer from an AR?
Now, take the buffer and spring out of the tube. Simply press down on the detent pin to release them. Using an AR armorer’s tool, carefully loosen the locking ring. When viewed from the back, it will rotate counter-clockwise.
Can you replace the buttstock on an AR-15?
Though replacing the buttstock on an AR-15 appears to be a simple thing, it can actually be just a little bit complicated. However, once you know the different sizes of AR stocks, tubes, and buffers, things get much easier.
How to Remove AR 15 Stock Without Tool
AR buttstock mounting systems are available in four basic designs. All four make use of an extension tube that protrudes from the back of the receiver and houses the recoil spring as well as the buffer itself. The confusion originates from the fact that systems exist in three lengths: A1 rifle, A2 rifle, and carbine.
Final Words
By now you must know that replacing AR 15 stock without a tool is super easy. You have to be steady and patient while doing it. Most of the guns require the same procedure. So now, there will be no problem changing the stock. If you find this article helpful, share this with your friends. And let us know if you have any queries.
