How to Remove AR 15 Stock Without Tool Step 1. The initial step is to detach the existing stock from its extension tube. To access everything in the next... Step 2. Now, take the buffer and spring out of the tube. Simply press down on the detent pin to release them. Step 3. As you remove the old ...
Full Answer
How to break down an AR 15?
Unloading an AR Rifle
- Remove the magazine from the mag well.
- Lock the bolt to the rear.
- Visually and physically inspect the chamber.
- If a round is in the chamber, remove it.
- Release bolt and put the rifle on safe.
How to change AR15 stock?
- Better handling (more bench-friendly or faster to the shoulder);
- Superior accuracy (better bedding systems, more precise inletting than inexpensive wood or plastic);
- Improved stability (elimination of warpage) under more diverse conditions;
- Ability to hold a zero over a number of years;
- Better durability than average wood or plastic stocks.
How do you disassemble an AR 15?
How to Disassemble an Ar-15
- Remove the magazine from the weapon by pushing on the magazine release button and sliding the magazine out simultaneously.
- Pull the charging handle to the rear into its locked position, cocking the rifle, and look inside the feed chamber to ensure that no live ammunition is present ...
- Locate the rear take-down pin on the left side of the rifle. ...
How to disassemble an AR 15?
How To Disassemble and Clean Your SAINT AR-15
- First Steps. In the video at the top of the page, I discuss in detail basic firearms care/maintenance of the SAINT family of firearms.
- The Low Down. Keeping my rifle pointed in a safe direction, I must ensure that the rifle is unloaded. ...
- Onward and Upward. I will now move onto the upper receiver. ...
How to Remove AR 15 Stock Without Tool
AR buttstock mounting systems are available in four basic designs. All four make use of an extension tube that protrudes from the back of the receiver and houses the recoil spring as well as the buffer itself. The confusion originates from the fact that systems exist in three lengths: A1 rifle, A2 rifle, and carbine.
Final Words
By now you must know that replacing AR 15 stock without a tool is super easy. You have to be steady and patient while doing it. Most of the guns require the same procedure. So now, there will be no problem changing the stock. If you find this article helpful, share this with your friends. And let us know if you have any queries.
Why you Might Want to Remove Your AR Stock
There are several reasons why you might to remove the stock on your ar style weapon.
Tools You Might Need
With the knowledge that swapping out or removing your AR stock is a task you can manage on your own, let’s explore some of the tools you may or will need to accomplish this.
Types of Stocks You are Likely To encounter
When dealing with an AR platform, they come with one of several types of stocks. For an AR this is almost always going to be either a fixed stock or a collapsible stock.
Removing a Traditional Stock
A fixed stock which you may think of as a traditional stock is what the original AR rifles were designed with. These feature a stock made of a specific size that is non-movable and does not have any adjustments.
Removing a Collapsible Stock
If you are removing the entire collapsible stock and replacing it with a different design or brand it may be necessary to follow the same steps listed above.
Removing the Buffer Tube to Swap a Collapsible Stock
There may be a time when you choose to replace the buffer tube along with your adjustible butt stock. This may be necessary in some cases where the new butt stock doesn’t fit on the old tube.
Cautions and Legal Considerations
While you can remove the stock from your weapon, and even fire it so long as the buffer tube remains you must be aware of the overall length of the gun. Federal regulations require that any rifles be at least 25 inches in total length.
