Dissassembly of a full stock Mannlicher-Schoenauer Remove the bolt by pressing the bolt stop on the left side of the receiver and pulling the bolt all the way clear. Remove the magazine by pushing a wooden pencil against the hole in the aft end of the floor plate and rotating the floor plate 90 degrees
Full Answer
How do you disassemble a Mannlicher Schoenauer?
Dissassembly of a full stock Mannlicher-Schoenauer Remove the bolt by pressing the bolt stop on the left side of the receiver and pulling the bolt all the way clear. When you have the floor plate rotated, pull out on the magazine assembly and remove the magazine.
What are the characteristics of a Mannlicher rifle?
Mannlicher Characteristics Model Calibers Bolt Type Safety Stock Type Pre WWII 1900-1939 1900 6.5x54mm MS Round Knob Wing carbine, rifle, and takedown 1903 6.5x54mm MS Straight Butterknife " carbine, rifle, and takedown 1905 9x56mm MS " " carbine, rifle, and takedown 10 more rows ...
What was the barrel size of the Mannlicher-Schoenauer rifle?
The standard barrel length for the 1905, 1908 and 1910 was 50 cm (19.685”), longer barrels of 60cm (23.622”) were an option. 1903 model had a 47 cm (18.5") barrel. Dissassembly of a full stock Mannlicher-Schoenauer
When did Mannlicher-Schoenauer stop making shotguns?
Although Mannlicher-Schoenauer production officially ceased in 1968, some examples have been observed with proofmarks indicating 1970 and later as the final year of assembly. For a serious case of confusion, see the Mannlicher-Schoenauer section of the Shooter’s Bible #53 of 1962.
Why you Might Want to Remove Your AR Stock
There are several reasons why you might to remove the stock on your ar style weapon.
Tools You Might Need
With the knowledge that swapping out or removing your AR stock is a task you can manage on your own, let’s explore some of the tools you may or will need to accomplish this.
Types of Stocks You are Likely To encounter
When dealing with an AR platform, they come with one of several types of stocks. For an AR this is almost always going to be either a fixed stock or a collapsible stock.
Removing a Traditional Stock
A fixed stock which you may think of as a traditional stock is what the original AR rifles were designed with. These feature a stock made of a specific size that is non-movable and does not have any adjustments.
Removing a Collapsible Stock
If you are removing the entire collapsible stock and replacing it with a different design or brand it may be necessary to follow the same steps listed above.
Removing the Buffer Tube to Swap a Collapsible Stock
There may be a time when you choose to replace the buffer tube along with your adjustible butt stock. This may be necessary in some cases where the new butt stock doesn’t fit on the old tube.
Cautions and Legal Considerations
While you can remove the stock from your weapon, and even fire it so long as the buffer tube remains you must be aware of the overall length of the gun. Federal regulations require that any rifles be at least 25 inches in total length.
