Use the EFI Live explorer to copy your stock tune file from the "read" file in the program to your desktop. E-mail this file it to your tuner so they can re-save the stock file you took off your truck into a flash tune file. This new tune file will be a stock file that you can now flash to the truck.
Full Answer
What is a performance reflash and why do you need one?
Reflashing for Performance – A performance reflash can help you maximize the drivability and responsiveness of your vehicle, as well as allow you to get the most power possible out of your engine.
How much does it cost to reflash a flash?
Repair shops can acquire the Drew Technologies RAP (Remote Assisted Programming) device free, and reflash for $125 per flash. Note: There is a small monthly fee (around $20) if the unit is not used at least 2 times per month. 4) In-House Bulk Flashing Devices.
Do I need to reflash the computer after installing a remanufactured transmission?
Many late model (2005-Up) 6-speed transmissions require the vehicle's computer to be reflashed after installation of a remanufactured transmission. Here are a couple options for local PCM/ECU reflashing / reprogramming:
How do you reflash an ECU?
If you want to reflash ECU, you will need a laptop and onboard diagnostics (OBD II). The OBD 2 code reader will allow you to read the factory data out of ECU; when you read the date of ECU, you can modify those ECU data, which is ECU reflashing, and this is how the reflashing ECU is done.
How do I flash my truck computer?
0:291:55How to Reprogram Your Car's Computer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo today i'm going to show you a new tool the flash 2 reprogrammer by cardone industries itMoreSo today i'm going to show you a new tool the flash 2 reprogrammer by cardone industries it reprograms the computer on your vehicle. Without taking anything off it just plugs into the dash.
Can you flash a car back to stock?
With OBDII unlock as of today (regardless of tuner) you are able to flash your car back to a stock tune, but you cannot restore your car back to its exact original state at the time of unlock/tuning.
Can you put a tuner on a stock truck?
Most tuners have tunes that are made to work with completely stock vehicles. These tunes are generally rated at 120 HP and under. You might notice that some tuners come with tunes above 120 HP.
How do you flash a Duramax back to stock?
This article will walk you through flashing your 2011-2016 DuramaxTurn the key two clicks forward to the Run position (engine off)Plug the SPADE into your truck using the OBD cable.Toggle down to Tuning Tool.Toggle to Program Full.Toggle to the Stock File and press okay.More items...
How do you flash a stock ECU?
6:4010:04How to Flash Your ECU (KTuner) - YouTubeYouTubeStart of suggested clipEnd of suggested clipClick on the little plus we've selected our factory ECU. Click next and then you're going to haveMoreClick on the little plus we've selected our factory ECU. Click next and then you're going to have those three Tunes. So if you see the first one you're going to see factory bass calibration.
How do I return a stock tune?
Reverting Back to Stock Tune with the SCT X4/SF4 TunerSelect “Program Vehicle” from the main menu.Select the “Return to Stock” option from the menu.Follow the device prompt to cycle the key to the ON position to setup the device for flashing and click Continue to confirm returning the vehicle back to the stock tune.More items...•
Can I tune a stock engine?
1:314:44Putting a tune on a stock car. Is it worth it? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhere you can see a jump though is in the throttle. Control most of the cars nowadays are drive-by-MoreWhere you can see a jump though is in the throttle. Control most of the cars nowadays are drive-by-wire. And that that tuning parameter can make a big difference just in the complexion.
Can you tune a stock ECU?
A modified stock ECU is typically one that is eeprom "chip" based. Using a real time programmer in place of the eeprom chip on the ECU board, a custom tune can be performed.
Is tuning your truck worth it?
Simply put – you risk shortening the lifespan of your truck, voiding the manufacturer's warranty and the likelihood of being pulled over by the highway patrol. On the other hand, if you tow heavy equipment, climb hilly terrain or travel long distances, an engine tuner could be your best friend.
Does EFI Live save Stock tune?
Use the EFI Live explorer to copy your stock tune file from the "read" file in the program to your desktop. E-mail this file it to your tuner so they can re-save the stock file you took off your truck into a flash tune file. This new tune file will be a stock file that you can now flash to the truck.
What is the difference between FlashScan and AutoCal?
AutoCal is limited to flashing tunes provided by a single tuner. FlashScan is required to create tunes for an AutoCal device. AutoCal devices cannot create tunes.
How do I download EFI live tunes?
0:173:51Loading Tunes On EFI Live Autocal / Flashscan - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour usb cable a pc laptop that already has efi live explorer and efi live scan and tune or the v8MoreYour usb cable a pc laptop that already has efi live explorer and efi live scan and tune or the v8 software currently installed and generally you'll need a good internet connection to get that.
What is an ECM reflash?
Essentially, an ECM reflash is either done to improve the performance (or make it more to your liking) or to match an aftermarket ECM with its new vehicle. Remapping an ECM for Economy – For business owners who have a fleet of commercial vehicles, fuel efficiency is the name of the game.
Why does my car flash?
Flashing because of Vehicle Issues – If your vehicle is showing false error codes, has a hot or cold starting issue, experiences idle roughness, stalling, or an emissions failure, it may be because the existing software needs to be replaced. Flash Tuning for a Different Vehicle – This type of reflash is performed when an aftermarket ECM is ...
What is flashing an ECM?
In other words, flashing an ECM allows it to have the same software and parameters that it would have were it in a vehicle rolling new off the assembly line. Without reflashing, the data stream from an aftermarket computer that the other components in ...
