How to Refinish a Gun Stock
- Step #1 Take Your Gun Apart. We don’t recommend refinishing your gun while it’s put together. ...
- Step #2 Clean the Gun Stock. ...
- Step #3 Strip the Old Finish. ...
- Step #4 Clean Up the Grease. ...
- Step #5 Fix the Imperfections. ...
- Step #6 Sand the Gun Stock. ...
- Step #7 Stain the Gun Stock. ...
- Step #8 Apply the Finish. ...
Full Answer
What adhesive works best to repair a gun stock?
best glue to repair a cracked stock
- Tripod. I have an older BT-99 that has developed a small crack on the right top tang area. ...
- mixer. I think a "Crazy Glue" type product will work very well or any wood glue. ...
- PerazziBigBore. Acra Glass ...
- wanderer. ...
- GW22. ...
- Baron23. ...
- Dennis DeVault. ...
- OldRemFan. ...
- phirel. ...
- Spanky. ...
What is the best oil to finish a gun stock?
Top 10 Best Oil For Walnut Gun Stocks In 2022
- Birchwood Casey Gun Stock Wax
- Dr. Tobias Colon 14 Day Cleanse. ...
- CuttingBoard Food Grade Mineral Oil for Cutting Boards. ...
- Lin-Speed Gunstock Finish and Care Oil. ...
- Tru-Oil Gun Stock Finish 3oz
- Birchwood Casey Tru-Oil Stock Finish 3 Ounce
- Ostermayer Jagd Gun Stock Finish. ...
How to finish a gun stock with Tru-oil?
Refinishing a Gunstock with Tru-Oil for a High Gloss Finish
- Remove the old finish and strip your project back to bare wood. I use Sunnyside Corporation’s stripping solution. ...
- Sand the gunstock free of scratches ending in 600-grit. To be perfectly clear, use rough grit paper if you’re getting rid of scratches. ...
- Take a t-shirt, cut it up. ...
- Use the lint-free strips to dab on Tru-Oil and rub into the wood. ...
What should I use to finish my rifle stock?
- The Lin-Speed formula is simple to use
- It is affordable
- You can use it over many surfaces
Can you refinish a gun stock?
0:5715:45How to Refinish a Rifle Stock - woodworkweb - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this gun will be completely stripped and we will refinish it completely so that looks almost asMoreAnd this gun will be completely stripped and we will refinish it completely so that looks almost as though it came out of the factory. That what I'm working with today is a single piece of stock.
What is the best finish to put on a gun stock?
The best finish to put on a gun stock is an oil finish. It is easy to apply, durable and can be used on finished and unfinished wood. Oil finish is also water-proof, prevents UV light from damaging the wood, and can last for several years.
How much does it cost to refinish a gun stock?
Current Refinishing Pricing for most gunstocks: $385 – 445 for most stocks. The amount depends on variables such as type of wood; ease/difficulty of old finish removal; extent and location of dents, gouges, scratches; coats required, etc.
Can you varnish a gun stock?
0:225:49Gunsmithing - Stock Finishing with Bar Top Varnish Presented by Larry ...YouTubeStart of suggested clipEnd of suggested clipIt's a very attractive finish. But bar top finish as a filler is more durable the bar or tabletopMoreIt's a very attractive finish. But bar top finish as a filler is more durable the bar or tabletop varnish will give the stock a very hard and moisture repellant surface when used to fill the grain.
What oil should I use on my gun stock?
linseedTru-Oil® Gun Stock Finish has been the professional's choice for gun stock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age.
Should I oil my gun stock?
It is important to clean your shotgun after each use to remove any moisture, unburnt powder or dirt. Gun oil should be used sparingly as excess oil or cleaner can damage the stock.
How many coats of Tru Oil are on a gun stock?
Then just oil-dry-buff until you get your desired finish. As little as two coats can make a durable glossy finish, but I like to take it out to 4-6 or even 8 for a deep luster.
How much does it cost to restore an old shotgun?
Base Shop PricesService Charges:PriceRestoration of Modern Guns (Does not include new parts):Bolt Action Rifle or Shotgun$150.00Pump or Auto Rifle or Shotgun$175.00116 more rows
Is linseed oil good for gun stocks?
Boiled linseed oil is more often used on bare wood and is popular for finishing gun stocks, as the process of heating it decreases its drying time. When hand rubbed into wood, it creates a durable weatherproof seal and the heat produced from the friction of rubbing produces a deep, polished finish.
What is Tru-Oil Gun Stock Finish?
Tru-Oil® Gun Stock Finish has been the professional's choice for gun stock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age.
Is tung oil good for gun stocks?
We recommend using our High Lustre Polymerized Tung Oil formulation as it builds to create a well sealed and durable coating, while maintaining a hand rubbed, “gun stock” finish.
🏆 What's covered?
The stock can be coated with a thin layer of polyurethane. Polyurethane is a polymer that..
🔍 How did we come to the conclusion?
Before, refinishing keep in mind whether refinishing the gun will improve the..
🤔 Summary
You can also use steel wool, but it can cause problems during the refinishing..
How to clean a gun stock?
Clean the Gun Stock. Once the waiting period is over, wash the finish remover off of the stock with mild soap and warm water. If needed, you can use a rough sponge or steel wool to remove the finish along with any grit and grime remaining. After that, rinse the wood thoroughly and wipe it down.
How to refinish a gun?
Because of the process involved, you can't refinish the wood while it's attached to metal. Start by removing the wooden pieces from the rest of the gun. Usually you do this the same way you would when cleaning the gun. 2.
How to clean wood after heat?
After applying the heat, use the degreaser and give the wood a good scrub. You can alternate and repeat the heat and degreasing as many times as necessary until you're satisfied the wood is clean and oil-free. 5. Inspect the Wood. Inspect the wood for cracks or damage. Take steps to fix or repair any issues now.
How to sand wood with lemon oil?
Put a little lemon oil or other natural oil on the wood to strengthen it. Once that has set in, begin sanding by hand. Start with the smallest number grits first and work up to larger numbers. There's typically no need to go beyond around 400 grit size.
How to remove finish from a drywall wall?
Use some kind of stripper or finish remover. Make sure you choose a product that matches your situation. Some are designed to be used outdoors or in a well-ventilated, shop-type environment, and some are safe for indoor household use. Read labels before you start working to ensure you're using the product safely.
How to fix cracks in wood?
Inspect the Wood. Inspect the wood for cracks or damage. Take steps to fix or repair any issues now. Most cracks or other damage can be fixed with a little sawdust and epoxy or wood sealant, so feel free to attempt those at your own discretion. As long as there is no structural damage, you can move on to the next step.
What to do if your gun is structurally damaged?
If you feel like the wood is structurally damaged, you might want to consult someone who is experienced in gun repair. That could mean bringing your firearm or components to a professional gun repair shop, for example.
What to do after stripping stock?
After stripping your stock, it still will have some old stain and grease trapped in its pores. To correct this start boiling some water ( be careful!) then use a de-greaser of your choice. I used "Krud Cutter" because it is biodegradable and it lathers the wood in a nice coat of suds.
How long to boil stock in hot water?
Cover your utility sink with a towel and allow your stock to float in the hot water for about 5 min before flipping it to the other side. Keep doing this until the water is lukewarm.
How to make a wood stock look like a glop?
First lightly sand your stock so that you get some sawdust residue, then mix your epoxy with the sawdust until it looks like a glop of gooey wood mud. Use a tooth pick to push your new wood muck into the crack completely, then use a clamp of some sort to push the wood together and hold it there.
How long does Tru oil dry on wood?
The first coat the wood should soak up fairly quickly, which is wonderful! Allow the tru oil to dry for 8 hrs. Once you get back from an 8 hour pizza run, be sure to lightly sand the surface with some steel wool, and apply another layer of tru oil.
How to remove finish from a rifle?
After applying the remover on one side, wrap that side with a plastic sheet and repeat the same process with the other side. The plastic sheet will help the remover to work correctly as it will not dry out.
Why do people refinish guns?
Refinishing can improve the value, price, and desirability of the buyers. The condition of the gun can be made much better through this process. In this process, a gun is disassembled, and all of its parts are cleaned, repaired, or restored. If you want to change your gun’s specs a little bit or want to modernize to refinish may be your best choice.
How to remove grease from a gun?
Gun also contains some oil stains that can either be removed by pouring boiling water or with the help of a hairdryer. The hairdryer will pull out the oil from the surface and will be wiped out.
How to get grain dust off of stock?
Use some scrub pads to remove the grain dust from the stock. It also provides a burnishing effect and is suitable for final refinishing. Clean the whole stock to get good results.
How to protect checkering?
Sanding. After the stock is dried, the next process is sanding. To protect the checkering from the sanding process, you can cover it with tape. For smooth, full-length stroke, we recommend using a large sanding block. 5. Dusting. Use some scrub pads to remove the grain dust from the stock.
What is the best way to remove walnut stain from a gun?
Fillers are used to duplicating the rich, walnut-hued stain. We use French red as many gun makers use it. Let it dry and wipe out the extra filler with the help of scrub pads. It would help if you rubbed it in the grain’s direction to take all the filler out of the pores.
What is refinishing metal?
Mainly in refinishing, the metal parts are cleaned and polished. The metal parts that should be appropriately refinished are taken to the factory in which they were manufactured. It is done to protect their serial number, proof marks, pinholes, and sharp screws and edges.
How to finish a gun stock?
Remove a Dent. The key is steam. Take a regular iron and set it on high. Grab an old T-shirt, washcloth, or a couple of .30-caliber-size cotton cleaning patches and dampen them.
How to fix scratches on a gun stock?
Just rub the stick across the scratch and work it in with a soft cloth. 3. Restore Faded Wood. Once you’ve steamed and sanded a stock, the wood can appear faded and worn.
How to get rid of bluing on a shotgun?
To touch up a worn spot of bluing on your gun—such as holster wear on a revolver, or around the ejection port of a shotgun—apply a light coat of cold bluing, such as Brownell’s 44/40, with a cotton swab. Follow this by wiping down the area with solvent on a rag—Brownell’s TCE Degreaser excels in this role—to remove the bluing formula. Last, give the metal a going-over with some gun oil on a cloth to protect it.
How to remove rust from a gun?
To remove an unwanted bloom of rust on a gun, dab some gun oil on the afflicted area and work it over with a piece of No. 0000 steel wool. This extra-fine grade of steel wool won’t scratch or mar the metal on even fine guns. Once you’ve removed the rust, wipe the metal with a cloth to remove any small bits of the steel wool that may have come loose, and then apply a drop or two of gun oil for protection against future corrosion.
How to protect wood with a natural finish?
One of the best ways to protect wood with a natural finish is to use some kind of wax-based or oil-based product (but not Pledge). Howard’s Feed-N-Wax wood polish and conditioner contains a mix of oils that will preserve and shield your stock from the elements. Wipe it on, let it sit for 20 minutes or so, then buff it off with a clean cloth. T/C’s Bore Butter, which is used to lubricate the inside of your blackpowder rifle barrel, also works well in this capacity.
What happens when you sand a gun stock?
Once you’ve steamed and sanded a stock, the wood can appear faded and worn. This can happen when the stock is exposed to the elements as well, particularly water. Brownell’s Stock Rubbing Compound is to your gun what car wax is to your truck. Rub in this mildly abrasive compound, and as you buff it off, it will restore luster and protection to your stock.
How to fix a gouge in wood?
The steam will raise the wood. Repeat until flush. With fine sandpaper (600- or 800-grit), knock down any raised grain or high spots. 2. Fix a Gouge. Now you’ve done it. You banged your stock against a rock and have left an unsightly gouge. Start by following the steps to steam out a dent.
How to remove a finish from wood?
Next, remove the existing finish from the wood. There are two main methods to accomplish this: sanding and chemical stripping. Hand sanding is the most common option, as it’s relatively simple and effective, and it allows the most control over the process. You can follow the grain of the wood, work on dents and dings, and decide how much or little of the finish is removed. Start with a fine grit and work your way up to a coarser grit as needed. If hand sanding sounds like a lot of work, you can also use a power sander. Power sanders aren’t as precise, however, so take that into account when determining the best way to sand your gun’s stock.
Who is Numrich Gun Parts?
Numrich Gun Parts Corporation is America’s leading supplier of hard-to-find, obsolete, and rare gun parts and accessories.
How to get a dent out of wood?
Using the iron in a circular motion, press lightly to apply steam and heat liberally to the dent. Check your progress regularly to avoid overheating the towel or burning the wood. After a few minutes, the dent should be lifted out and the wood will look like new.
Can you fill scratches in wood?
Once you have removed the old finish to your desired level, you should inspect the underlying wood for damage. Minor scratches can be filled in with wood filler. On higher end stocks you may want to use specialized scratch-filling materials, which chemically bond to the wood and blend colors to match the grain perfectly, leaving no trace of the scratch.
Do long guns have wooden stock?
One thing that nearly every shooter will encounter at some point in their shooting career is the need to recondition or restore a wooden stock on a long gun. Most long guns made before 1960 have a wooden stock by default. With use over time, wooden gun stocks can get to a point where the finish is dull and damaged.
Can you use a power sander to sand a gun?
If hand sanding sounds like a lot of work, you can also use a power sander. Power sanders aren’t as precise, however, so take that into account when determining the best way to sand your gun’s stock.
Can you apply a finish in multiple coats?
Apply the finish in multiple light coats for best results. Be sure to leave ample time to dry between coats, which gives you an accurate idea of what your stock will look like at various stages of the coating process. You may decide to stop sooner or later than you initially planned.
Step 1: Step 1
The gun has no flat surfaces so I only used steel wool to remove the finish. Start by applying a liberal coating of solvent over a section of the gun stock. Work a section at a time. Wait a minute or so and test the area. I live in a warm climate so my wait time is short. Solvent works best in warm weather.
Step 2: Step 2
Sand the gunstock. I used various grades to smooth it down. The grain will sometimes raise up when you strip wood. Try not to over sand to preserve the natural patina. In this case though I had to use a power sander as I was having trouble removing oil stains from the side that the solvent didn't remove. Wipe it down with a dust cloth.
Step 3: Step 3
Time to apply the finish. Working from the butt of the gun stock up, I coated the wood with Rustoleum Clear finish. if possible, always brush with the grain. The finish dries quickly like the stain. After about an hour, I lightly sanded the stock with 1200 sandpaper to remove any dust particles.
How to get rid of BLO on a rifle?
Continue until the wood won’t accept any more and walk away. Allow the rifle to rest, occasionally readjusting its positioning to avoid BLO pooling up in certain areas.
How to inspect a gun for bullets?
Remove detachable magazines if possible. Pointing the gun in a safe direction, open the breach and inspect for a bullet in the chamber or anything sitting on deck. Remove the wooden stock from the barrel and action.
What is a BLO in a rifle?
Linseed Oil —Nectar of the Gun Gods. Boiled Linseed oil (BLO) will bring new life to an old rifle while protecting the stock for years to come. While craftsmen like Heineke use a concoction of BLO and alkanet root that steeps for years, giving the BLO a pinkish hue, we will simply be using BLO.
How to buff out BLO wood?
Don’t stop until, as Heineke elegantly put it, “it’s too painful to keep going or the dog needs a walk.” The heat generated from the friction of your hand on the wood will buff out the BLO, giving the stock a glossy appearance. The finished product is a completely quenched stock. It will refuse liquids, be it water or oil in the field and at home.
How to paint a rifle with steel wool?
Rest the rifle on a work bench or over an old towel and put on a pair of gloves. Apply approximately one tablespoon of paint thinner to the steel wool and rub the rifle down within circular motions. Add more paint thinner to the steel wool as needed .
Does Meateater support the rifle revolution?
MeatEater fully supports the rifle revolution, as you can see in our collaboration with Weatherby. That being said, hunters tend to be a nostalgic bunch. Geriatric shoulder mounts, honey holes that evoke sentimental hope, and historic rifles passed down the family tree for generations are staples within the hunting community.
How long does it take for a rifle stock to cure?
After you have applied all the layers of Tru-Oil to get the finish you want, let your rifle stock cure for at least a week before adding a satin finish using the Stock Sheen & Conditioner.
How to remove old finish from rifle?
After the stock is removed, the most effective way to remove the old finish is to sand it by hand.
How long to wait to apply Tru-Oil to Birchwood Casey?
After waiting at least 24 hours, use very fine steel wool to lightly remove any dust that may have settled while drying before moving on to the next step. Apply Tru-Oil. Birchwood Casey Tru-Oil is sometimes easier to apply to your rifle stock using bare fingers.
How to get darker stain?
To get the color that you want, just add water and spot test the stain on a piece of scrap wood until the right consistency is achieved. If you decide you like the darker stain, no water is necessary.
What is the best water/stain mix for refinishing?
For most refinishing applications, a 50/50 water/stain mixture is just about right, but this depends on your personal preference and the original color of the stock.
Who is Numrich Gun Parts?
Numrich Gun Parts Corporation is America’s leading supplier of hard-to-find, obsolete, and rare gun parts and accessories.
Can you refinish a rifle stock yourself?
Using the finishing kit, you can easily refinish your rifle stock yourself. Here’s what you’ll need: