5 Ways to Refinish a Gun Stock Yourself, Plus Other Touch-Up Tricks
- Remove a Dent. The key is steam. ...
- Fix a Gouge. Now you’ve done it. ...
- Restore Faded Wood. Once you’ve steamed and sanded a stock, the wood can appear faded and worn. ...
- Bring Back Color. Another way to make a faded spot go away is to apply a light coat of Tru-Oil by Birchwood Casey. ...
- Protect Your Stock. ...
Full Answer
What should I use to finish my rifle stock?
Jul 17, 2014 · ** Read Full Article - http://goo.gl/iL1NdcIn this video we are finally responding to so many requests for information on re-finishing a gun stock. In our c...
How to build a rifle stock from scratch?
May 02, 2022 · Getting Started 1 – Remove the Components. The lock-work and furniture need to be removed from the stock. Secure the screws to their... 2 – Remove the Old Finish. Read the warning label on chemical strippers first! Then try a cautious test in an... 3 – Sand Everything. …
What is the best material for a rifle stock?
Jul 20, 2020 · Tools You’ll Need for Striping Your Stock. A sharp blade or scraper - This is the fasted way to remove the bulk of your finish. A Pocket Knife is fine or you can use a card-scraper. Sand-Paper in 80, 120, 180, 220, 320 grits - I don’t recommend power sanding, Hand-sanding …
How do you tighten rifle stocks?
Jan 25, 2021 · Precautions before refinishing. 1. Removing. In the first step, you should remove the rifle’s barrel and the old finish in place of which new finish will be applied. For removing the …
Can you Restain a gun stock?
How much does it cost to have a gun Stock refinished?
$385 – 445 for most stocks. The amount depends on variables such as type of wood; ease/difficulty of old finish removal; extent and location of dents, gouges, scratches; coats required, etc.
Should I oil my gun stock?
Is tung oil good for gun stocks?
Is linseed oil better than tung oil?
What is the best oil to put on a gun stock?
Is boiled linseed oil good for gun stocks?
How many coats of tung oil does a gun stock have?
Is Tru oil the same as tung oil?
How many coats of tung oil should be used?
🏆 What's covered?
The stock can be coated with a thin layer of polyurethane. Polyurethane is a polymer that..
🔍 How did we come to the conclusion?
Before, refinishing keep in mind whether refinishing the gun will improve the..
🤔 Summary
You can also use steel wool, but it can cause problems during the refinishing..
Step 1: Remove the Old Finish
Isn’t this hideous? This is all the factory varnish scraped off with my pocket knife. Hold the sharp knife 90-degrees to the surface and scrape. It’s oddly satisfying.
Step 3 - Apply Tru-Oil
This is where things can get made complicated but don’t need to be. In my video I made it a little over-complicated. I think you get the same results by applying a coat, letting it dry, lightly wet sand, and repeat two more times.
How to remove finish from a rifle?
After applying the remover on one side, wrap that side with a plastic sheet and repeat the same process with the other side. The plastic sheet will help the remover to work correctly as it will not dry out.
How to protect checkering from sanding?
To protect the checkering from the sanding process, you can cover it with tape. For smooth, full-length stroke, we recommend using a large sanding block. 5. Dusting. Use some scrub pads to remove the grain dust from the stock. It also provides a burnishing effect and is suitable for final refinishing.
How long does it take to remove plastic sheet?
After 15-20 minutes, you should remove the plastic sheet, and you will get the softened surface of the old refinishing that can now be removed with scrub pads. You can also use steel wool, but it can cause problems during the refinishing process, so we do not recommend it.
What is polyurethane used for?
Polyurethane is a polymer that is used for cushioning of metals, especially for stock. Painting the stock with different metals like different paints can make gun design more beautiful and attractive. With this process, your old gun will look more beauteous. Refinish can be done in several ways.
How long does it take for a coat of a coat to dry?
Sometimes up to 10, even more coats are needed to achieve deep, lustrous beauty. Drying time between coats is at least one day. Drying times also vary, depending on humidity. Once all finishing coats have been applied, curing of the finish is required for maximum hardness and final luster creation.
What does a $100 piano look like?
A $100 word having to do with light reflectance. Essentially, you want a little light reflectance from wood pores, otherwise, the wood surface looks like glossy “plastic”, that piano top look, an appearance that most observe as being what it is– cheap. Factory finishes almost always are sprayed on urethane (plasticized variations), and produce no beauty that chatoyance provides.
Step 1: Disassemble the Firearm
There are many ways to do this and way too many different makes and models of firearms to try to explain how to exactly disassemble your (or your clients) firearm. All that really matters is to get the stock and forearm (due to this being a pump shotgun) apart from any metal pieces.
Step 2: Lets Get Stripping!
That's right, you gotta strip that stock of its old finish before you do anything else. First make sure to use proper safety gear! Second I used a product called "Magic Strip Citrus Action" for three reasons; '#N#1. It's safe for indoor use#N#2. It's biodegradable#N#3.
Step 3: De-grease Your Stock
After stripping your stock, it still will have some old stain and grease trapped in its pores.#N#To correct this start boiling some water ( be careful!) then use a de-greaser of your choice. I used "Krud Cutter" because it is biodegradable and it lathers the wood in a nice coat of suds.
Step 4: Fixing Cracks!
After the stock dried I could tell the stock had a good crack in it. To fix this problem you need to secure the wood fibers back together as best as possible. *Disclaimer - if the crack is all the through the stock you may think about getting a new stock or only using the stock as a show piece.
Step 5: Sanding!
After the stock is dry and cracks are sealed I use a little lemon oil to put back some natural oils into the wood. It allows the fibers to rise up and be resistant to cracking in the future.#N#Now start sanding, go from lower number grits all the way up to around 400. There is no real need to go above 400 grit trust me.
Step 6: Staining
Now the fun part!#N#Pick out the stain you would like for your stock, I use water based stains and normally try to use two different kinds to enhance the stocks features.#N#I first start off with a pre-stain conditioner, this allows the wood to have a neutral starting point for the rest of the staining to sit upon.
Step 7: Sealing and Waxing
After you have achieved the color you wanted in your stock, you now have to seal it in for eternity from the outside elements.#N#Get your gloves on and hang the stock from the ceiling. Break out some tru oil and with one finger apply the tru oil in a circular motion all over your stock. Be sure not to use so much Tru oil that it ends up dripping.
What is a meatcrafter knife?
The Essential Meatcrafter Knife. A hybrid hunting fixed blade with a fine, smooth edge to trim, debone, or slice your preferred cuts of meat. Makes just as much sense in the back of your truck as it does in the kitchen drawer. First Lite.
What is BLO oil?
Boiled Linseed oil (BLO) will bring new life to an old rifle while protecting the stock for years to come. While craftsmen like Heineke use a concoction of BLO and alkanet root that steeps for years, giving the BLO a pinkish hue, we will simply be using BLO. With a paintbrush, liberally cover the entire stock with BLO.
