Add an Auxiliary (MP3/Ipod) Input to Your Car's Stock Radio
- Step 1: Remove Your Stock Radio From the Car. This is probably the biggest challenge in the whole project. If you do any...
- Step 2: Locate the CD Changer Plug & Pins. Locate the CD changer plug and gain access to the pins for audio transmission...
- Step 3: Solder in Aux Input Jack. Once you have identified the...
Can you add an Auxilary Jack to your car?
HOW-TO: Add An Auxilary Jack To Your Car 104 Comments by: Vince Veneziani June 14, 2005 Title: Copy Short Link: Copy Hello readers and welcome to another HOW-TO article. I originally was planning on doing the CVS Disposable Camcorder Hack, but it’s only 90% done. To answer questions of can it be reused?: Yes, it can.
How do you install a jack in a car stereo?
Choose the location you like best to mount the jack. Push the jack through your hole you drilled and use the nut supplied with the jack to screw onto the jack and hold it in place. Step 5: Test Your Connections & Reinstall the Radio. I'd suggest a test run before you completely reinstall the stereo to find it doesn't work.
How to hack an auxiliary input to a car stereo?
Hack an Auxiliary Input to a Car Stereo. 1 Step 1: Disassemble the Dashboard. The first thing is to remove the radio from the dash. The console lid, radio side trims, driver’s lower foot-well ... 2 Step 2: Remove the Stereo From the Dash. 3 Step 3: Head Unit Dissassembly. 4 Step 4: Determine the Inputs to Solder To. 5 Step 5: CD Changer. More items
Can I add an auxiliary input to my factory radio?
We can add an auxiliary input to your factory radio. An auxiliary input interface allows you to connect the 1/8-inch headphone jack output of your smartphone or media player to your radio. Once it is connected, you can listen to your music through the factory radio and speakers.
How can I add AUX to my stock radio?
2:507:29How to Add AUX to an Old Car Stereo for $2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe cable we're using is just a regular 3.5 millimeter microphone extension cable I'm just going toMoreThe cable we're using is just a regular 3.5 millimeter microphone extension cable I'm just going to cut a little bit of it off. And then strip these wires and attach them to the radio.
Can I install an AUX plug in my car?
Most vehicles can have their existing radios modified to have an AUX port method installed into the current radio. Updating the current radio tends to be less expensive than installing a new radio but costs more than buying an external adaptor for AUX use in the car.
How do I add a headphone jack to my car stereo?
How to Add an Audio Jack to Your Car StereoUsing a Cassette Adapter. If you're stereo is old enough that it has a cassette player, a very cheap way to give your stereo an audio jack is to get a cassette adapter. ... Using an RCA Cable. ... Buy an Aftermarket Stereo. ... Go Bluetooth.
How do I connect my AUX to my car stereo?
0:111:30How to Connect Android Phone to Car Stereo and Listen to Music on Aux ...YouTubeStart of suggested clipEnd of suggested clipThe location of these ports might be in a different location in your vehicle. Now take the stereoMoreThe location of these ports might be in a different location in your vehicle. Now take the stereo cable and insert the 3.5 millimeter plug into the Android phones headphone jack.
How do you put an AUX cord in a car that doesn't have one?
FM Transmitter — Under $20 An FM transmitter plugs into your cigarette lighter socket and connects to your device via an aux cord or Bluetooth. The transmitter broadcasts what's playing from your phone over a short FM frequency to which you tune your car's radio and receive.
How much is it to install an auxiliary jack in a car?
The part itself is relatively cheap, costing around $79.99 at the high end. But unless you have the skills and equipment necessary, you will likely end up spending closer to $200 on a professional installation. You can keep your old stereo, complete with a surprisingly relevant tape deck (they're making a comeback!)
How do you install a 3.5 mm jack in a car?
2:075:04How To: Install a $3 AUX Input To Your Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou need to remove this locking mechanism to be able to pull the plug out once the blue lockingMoreYou need to remove this locking mechanism to be able to pull the plug out once the blue locking mechanism is removed you can just squeeze the tab on the back side of the plug.
How do you put an AUX input in a GM factory radio?
0:003:53Aux Cable On Factory GM Stereo Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipModel number aux gm1 there are a lot of different kinds you just want to look for a aux cableMoreModel number aux gm1 there are a lot of different kinds you just want to look for a aux cable adapter for your stereo.
How do I connect headphones to my car radio?
Hook your ear buds directly into your car's radio by inserting the jack into the "Aux" port, if your car has one. Just as is the case with an iPod or portable CD player, doing so will transmit audio directly from the stereo output to your ears.
Why won't My aux cable work in my car?
Check to see if the AUX cord is firmly connected to both devices. If this does not work and are only two rings, your cord is not compatible. If there are three rings, replace the auxiliary cord. If this does not work, the problem may be with the auxiliary cord jack and you may need to replace it.
How can I connect my phone to my car radio without Bluetooth or aux?
How to Play Music from Phone to Car without AUX or BluetoothFM Radio Transmitter. Most contemporary car models have an FM radio and a cigarette lighter. ... Cassette Tape Adapter. ... USB connection. ... Sound Routing App. ... Apple CarPlay and Android Auto. ... Audio Cassette Adapter. ... FM Transmitter.
How does aux cable work in car?
An aux-in (or auxiliary-in) socket in your car is a 3.5mm jack into which you can plug anything that has a standard headphone connection. It sends sound to the multimedia system, enabling you to 'stream' music from a device through the car's speakers.
Step 1: Remove Your Stock Radio From the Car
This is probably the biggest challenge in the whole project. If you do any work on cars, then your shop manual will help, but also there's tons of user forums dedicated to specific car models.
Step 2: Locate the CD Changer Plug & Pins
Locate the CD changer plug and gain access to the pins for audio transmission from CD changer to head unit. It should be something like the socket below in the lower right hand corner. They usually have about 8 or so pins arranged in a circle. Now here's where you have to do a bit of googling.
Step 3: Solder in Aux Input Jack
Once you have identified the audio pins, find a place to mount the internal jack. Using short pieces of small gauge wire, solder connections from the pins on the stereo to the pins on your panel mount 1/8" audio jack. Be sure to keep the signals correctly matched to the right pins so you don't end up crossing channels or ground.
Step 4: Mount the External Jack in Dash
Now that you have the internal jack mounted & wired, find a nice location in the dash where you will mount the external jack to plug in your MP3 player. Carefully drill a hole in the dash just larger than the jack to mount the external jack. Use the old headphone cable and cut to the appropriate length to connect the internal and external jacks.
Step 5: Test Your Connections & Reinstall the Radio
I'd suggest a test run before you completely reinstall the stereo to find it doesn't work. Hook up the cables and give it a try.
Step 6: Burn Your Special "Silent" CD
Now, in order to play the audio from your MP3 player, we need to trick the CD changer into thinking it's playing a CD. The stereo doesn't know that the audio is really being supplied by your MP3 player instead of the CD changer. In order to do this we just burn a special "silent" CD. It's got regular tracks, but there's no sound played.
Why Would You Want an Auxiliary Input?
We all seem to have at least few hundred of our favorite songs stored on our cellphones or portable media players. We listen to them while we are out for a walk, grocery shopping or even at our desks at work, but we can’t always listen in our cars or trucks.
Optical Connection
Many European vehicles, such as Porsche, Mercedes-Benz, Range Rover, Audi, BMW, Aston Martin, Jaguar and Bentley, use a digital fiber optic bus communication system called MOST for multimedia and audio transfer. MOST stands for Media Oriented Systems Transport.
Wired Connections
Several companies manufacture auxiliary input interfaces that mimic the presence of an optional satellite radio tuner module. The interface will have a stereo input connection for your music and will connect to your factory radio via the satellite radio tuner interface port. Just press the Sat button to activate the input.
RF Connection
For decades, one of the most popular methods of feeding and audio signal into a radio that didn’t have a dedicated auxiliary input was to use an FM Modulator. These devices would take the audio signal from your media player or phone, and transmit that into your radio via the FM receiver.
Visit Your Local Car Audio Specialist Today
While there isn’t an auxiliary input interface available for every make, model and trim level of vehicle, a lot are covered. Drop by your local car audio specialist retailer to see if one is available for your vehicle.
What jack to use for car stereo?
Adding a 3.5mm jack is the cheapest way to get a clear audio signal from your phone to your car’s stereo, without having to worry about distortion or interference with a cassette adapter or FM transmitter, aftermarket radio wiring, or expensive MP3 adapters. Ask Question.
Do CD drives need ground?
The CD drive will require a CD with a silent CD track burnt on it to play in order to trick the headunit into reading from the CD drive.
