Why do M40 barrels have tooling marks in them?
Gary Schneider, maker of the spec barrel used on the M40A3 and M40A5 ships his barrels with the tooling marks in them. For a period of time the PWS left the marks to hold spray paint better when the rifles in the field.
Is the M40A1 still being built?
Our M40A1 is built to the USMC, Quantico - RTE/Precision Weapon Shop build procedure. The USMC stopped building M40A1 Rifles in 1999 but here at G.A. Precision we still build them to the same specs the PWS 2112 armorer did from 1980 to 1999.
How is the M40A3 barrel made?
The barrel is mounted in a barrel spinner and ground with 320 grit abrasive cloth on a belt sander prior to installation. Gary Schneider, maker of the spec barrel used on the M40A3 and M40A5 ships his barrels with the tooling marks in them. For a period of time the PWS left the marks to hold spray paint better when the rifles in the field.
Where can I find information about the m40a3/m40a5?
A great reference for M40A3 and M40A5 information is TM 05539-IN, which is the Technical Manual for the M40A3 and M40A5. You can find a copy of it here.
See more
What barrels can a M40A1 take?
The original M40A1 Marine Sniper Rifle stock was designed for a heavy barrel Remington 700 . It can be used for either short or long actions, as well as ADL (blind magazine), BDL (hinged floorplate), and most detachable box magazine systems. It will take any barrel contour up to a #8.
What is a molded in finish?
Molded in colors are the most durable finish we offer. With a molded finish, the color is impregnated into the gelcoat, or exterior surface layer of the stock. All of the molded-in finishes below should be considered utility-grade. Mold lines, sanding marks, fiberglass cloth and small imperfections may be visible.
Why are fiberglass stocks higher than hunting stocks?
These stocks typically have a more solid fiberglass filler material which requires slower inletting speeds and more inletting for stock options and accessories and are priced higher than the hunting stocks because of the increased CNC machine time. Again the base price includes the color and finish of your choice.
How much weight does a fiberglass recoil lug add?
It will add about 6 ounces of weight to the stock. It will be used for anything above a .300 win mag caliber.
Do tactical rifles have paint on them?
The colors are not painted on the surface, but are molded into the stock for durability when used in extreme environments. Many military units specify this finish for their tactical stocks, with the choice of colors dependent on the part of the world where the rifle will be deployed.
Can you use sporter fill in magnum?
It is not recommended for magnum ca libers and this fill cannot be used for any caliber above a .300 win mag. Standard – The majority of our stocks are filled with standard fill, also called sporter fill. It is composed of fiberglass cloth and solid fiberglass throughout the forearm and action area.
How accurate is the M40A1?
The M40A1 is an outstanding system, very capable of extreme levels of accuracy, though the older M118 ammo tended to hold the rifle back to about 1 MOA, but the new M118LR (designed by the USMC) really unleashed the potential of these rifles with accuracy improving to about .5 MOA.
What rifles have replaced the M40A1?
The USMC has replaced the aging M40A1’s with the new M40A3’s. A rifle that has been in the developement stages for some time now. The M40A1’s have served extremely well for many years (over 30). She’ll be missed, but the A3 is a capable successor.
What scopes replaced the Redfield 3-9x?
The Redfield 3-9x scopes were eventually replaced by a specially designed scope built by Unertl to USMC specifications. This happened in the early 80’s and this is was the standard scope being used on the M40A1’s and the A3’s up until 2006 when the Schmidt & Bender PMII 3-12x scopes were adopted to replace the Unertls.
What is the M40A1?
The M40A1 has to be the pioneer of the modern sniper rifle. The USMC has always had a leg up on the US Army when it comes to sniping (Remember, I am US Army, so it takes a lot to say this!) and the USMC realized that they needed a standard sniper rifle that could perform the job up to standard.
Can you buy an original M40A1?
But you cannot purchase an ORIGINAL M40A1. The Last M40A1 built.
What rifle is a clone of the M40A3?
In this post Rifleshooter.com will build a clone of the United States Marine Corps M 40A3 Sniper Rifle. Replacing the M40A1 in 1999, and used by the Marines until 2009, the M40A3 is characterized by its heavy 25″ long barrel (24″ from the recoil lug), lug slotted optical platform and McMillan A4 stock. The M40A3 underwent a mid-life upgrade in 2007 ...
What rifles have serial numbers?
Many of the parts Marine Corps PWS rifles have their serial number marked. On the M40A3 and A5, the bolt handle, recoil lug, stock, bottom metal and optical platform all have the serial number marked on them. To prepare the parts for finish, they are hung outside on a rack.
Can a modification to a firearm cause death?
Failure to do so may void warranties and result in an unsafe firearm and may cause injury or death. Modifications to a firearm may result in personal injury or death, cause the firearm to not function properly, or malfunction, and cause the firearm to become unsafe.
