To do this you can screw a piece of wood to the back of the stock making sure the stock is level. You can then tape a washer to the front of the stock to keep it level in the other direction. (Hopefully the pictures explain this better!) The second way (and the method i chose) is to use a coping saw.
Full Answer
How do you adjust the stock on a pistol?
This is accomplished chiefly by adjusting the comb, the portion of the stock on which the shooter's cheek rests. Adjustable combs provide both up/down and left/right adjustment.
How do I choose the best adjustable comb for a shotgun?
Making sure that the comb is in the correct position is arguably the most important part of fitting a shotgun. Positioning the comb accurately for both height and cast is critical in allowing the shooter to mount the gun correctly and to obtain the optimum shot placement. An adjustable comb makes this process easier.
Can You tune a competition o&u shotgun stock?
An Italian company called TSK makes a competition O&U shotgun stock, which is adjustable in any imaginable way. With the number of adjustability options it offers, it should be possible to tune it for virtually any shooter. Let’s take a look at its different features.
What are the best tips for fitting a shotgun?
Making sure that the comb is in the correct position is arguably the most important part of fitting a shotgun. Positioning the comb accurately for both height and cast is critical in allowing the shooter to mount the gun correctly and to obtain the optimum shot placement.
What is the comb on a shotgun?
The comb is the top surface of the stock , and is the section of wood that makes contact with the underneath of a shooters cheekbone when a shotgun is correctly mounted. Making sure that the comb is in the correct position is arguably the most important part of fitting a shotgun.
Why use adjustable combs?
An adjustable comb makes this process easier. Adjustable combs are frequently fitted to obtain a comb position that can not achieved with a particular gun by the more usual casting techniques, or when the shooter wants to be able to alter the comb position for shooting different disciplines with the same gun.
Can you use adjustable combs on Beretta shotguns?
We have a system that allows us to fit adjustable combs to Beretta shotguns, yes even the little twenty bore. Some people find the Beretta guns too difficult to convert as the stock recess and stock bolt run quite high in the stock, but we have developed a process of reinforcing the recesses with walnut inserts, which combined with our hardware allows us to achieve a movable comb of a reasonable depth (21 mm).
How to keep stock level in both directions?
To do this you can screw a piece of wood to the back of the stock making sure the stock is level. You can then tape a washer to the front of the stock to keep it level in the other direction.
Can you cut stock with a new blade?
The stock was easy to cut and didn't take long at all, as long as you use a new blade there shouldn't be any problems. I have to admit i was a bit worried about cutting the stock but i only had to follow the lines, that i checked several times!
What is a competition O&U shotgun stock?
An Italian company called TSK makes a competition O&U shotgun stock, which is adjustable in any imaginable way. With the number of adjustability options it offers, it should be possible to tune it for virtually any shooter. Let’s take a look at its different features.
How many mm is a pull adjustment?
It allows 25 mm (about an inch) of length of pull adjustment.
What is the weight of a TSK stock?
The cheek pieces are available in many different shapes and sizes. There are also leather covered cheek piece options. Buttpad shape and material choice is wide too. The metal parts are made of some kind of high strength alloy (not specified) with the exception of screws which are stainless steel. The wooden portion is made of walnut. The overall weight of the stock is 2lb 1oz.
Who is the in-house firearm expert on TFBTV?
In this episode of TFBTV, James Reeves is at SilencerCo speaking with Beaver, the in-house firearm expert, about five unusually good suppressor host firearms. This video features a handful of guns that are not very common, but work really well with suppressors for a number of different reasons.
Do they pay a lot to get stocks tuned to the user?
Yep. Since they pay a lot to get stocks tuned to the user, I bet for a thou or two this would sell and get used.
How to shoot a trap gun?
Step 1. Take the trap gun to a shooting range. Fire one shot at a shotgun pattern board from a distance of 30 yards. A tight choke should be installed on the barrel.
What is an adjustable comb?
Adjustable combs provide both up/down and left/right adjustment. A stock of the correct length with a properly adjusted comb allows the shooter to see straight down the rib of the shotgun. Adjustable combs are standard on many trap guns or may be added to existing stocks.
What is a trap gun?
Trap guns are shotguns designed for shooting clay pigeons. The typical American trap gun is a single-barrel or double-barrel 12-gauge model. Trap gun stocks conform to the shooter's shoulder and face in specific ways to influence eye position and aim.
How to move point of impact horizontally?
Move the point of impact horizontally by loosening the comb posts and sliding them in the direction of the desired change.
How to make a stock upside down?
Fill the holes with epoxy, turn the stock upside down with the posts inserted, insert into the cheek rest, and line up the cheek rest precisely with the stock. Use painters tape to keep the rest aligned with the stock while the epoxy cures. (The stock will remain upside down and level during the cure process:
How to fill holes in a sandbox?
The existing holes are easy to fill..dip toothpicks in gorilla glue or epoxy and jam then in the holes until you can can't fit anymore. Let em set up, and cut flush. A new hole can be drilled right next to it and it will hold.
Does comb hardware add weight to stock?
You are going to have to clarify that last question for me GF...not sure exactly what you are asking. If you are referring to the comb hardware, it did not add appreciable weight to the stock, additionally all metal to wood transitions were epoxied to make sure that no air gaps remained that could weaken the stock under recoil.
Is the stock market biggie?
the stock is no biggie, I learned a lot from it. Just too many differences stacked up to make it an easy job. And it will work just fine as is.
Is the Saiga 308 a slant cut receiver?
If you are referring to Chile 's rifle, the Saiga 308 Version 21 is a slant cut receiver already. (Just a slightly different angle) So the stock is unchanged at its insertion point into the rear trunnion.
What is wrong with custom fitted stock?
The problem with a Custom fitted stock is that your body may change,Weight gain or loss, Loss of Muscle tissue etc. With an adjustable stock you can do just that --ADJUST as need be plus you won't be out 2 grand plus for the fancy fitted job !
What is a trap gun without an adjustable comb?
A trap gun without an adjustable comb is like that have a beautiful hot young thing for a girlfriend that is still a virgin. Nice to look at but, not much use.
Can you adjust a custom stock?
The problem with a custom stock is that you really never know if it is fitted correctly for you, with an adjustable stock you can try, perhaps the comb needs to be a little higher, perhaps offset to one side, The point is by trying you’ll know, and of course the best fit custom stock May no longer fit you if you gain weight or shoot differently as you age.
