Take a wood stock and add texture, swells, etc with Bondo or spray foam and then coat the entire stock with release agent. Pour the mold with chopped fiberglass mixed with resin. After curing pull the part out of the mold and finish with hard rubber spray texture to give it a chip resistant finish.
Full Answer
How do you make a custom stock for a gun?
The first step to crafting your custom stock is to create a solid fit between the stock and the action of the gun. If you are designing your stock from scratch, create an outline stencil for the side-profile and transfer the design onto your wood blank.
How do you disassemble a synthetic stock from a rifle?
Separate the synthetic stock from the rifle. Since the process may vary slightly by manufacturer, consult your operator’s manual for dis-assembly instructions. If possible remove the stock’s butt plate. Use 180-grit sandpaper and sand down the stock surface by hand.
Can you paint synthetic rifle stocks?
Synthetic stocks are very popular among modern rifles because of their durability and affordability. Unfortunately, they’re not as attractive as traditional wooden stocks. However you can easily customize your rifle stock by painting it to your liking. Epoxy-based primers and paints are particularly well suited for synthetic stocks.
What are gun stocks made of?
A gunstock begins as a hardwood blank. A blank is just a block of hardwood that is ready to be customized for a firearm. But, the usable wood must first be milled from timbers. The most popular types of hardwood for rifle stocks are black or claro walnut and maple heartwood.
How to finish a rifle stock?
Why do you need a custom rifle stock?
What is a gunsmith?
What is a wood stock blank?
How to sand a stock?
What is shaping a rifle stock?
What wood is used for rifle stock?
See more
How are synthetic gun stocks made?
It involves hand-laying fiberglass layers in a mold, with epoxy resin to bind the layers into a solid shape. Next, the void inside the stock is filled with polyurethane foam and catalyst, which expands outward, pressing the layers of resin-impregnated fiberglass cloth tightly against the inside of the mold.
What do you put in synthetic gun stock?
If you just want to get some dirt and dust off of the synthetic stock, regular soap and water will do the trick. You can rub it with any type of soap you want, such as Dial. Just rub it with some soap and wipe clean with water. Some people swear by bottled water – like Aquafina.
Can I paint a synthetic gun stock?
Epoxy-based primers and paints are particularly well suited for synthetic stocks. Before preparing your rifle for painting, verify that your rifle is unloaded. Additionally, remember to wear eye protection and a respirator while painting your rifle stock.
How are gun stocks made?
Traditionally, stocks are made from wood, generally a durable hardwood such as walnut. A growing option is the laminated wood stock, consisting of many thin layers of wood bonded together at high pressures with epoxy, resulting in a dense, stable composite.
Can you Cerakote synthetic stock?
Can you Cerakote a synthetic stock? Yes you can! Or anything polymer/ plastic that can be prepped and cleaned properly without damaging the material. An example of this would be any plastic, polymer, or rubber that is soft or too flexible for the coating to fully harden and remain durable.
Can you spray paint a rifle?
However, for adaptable camouflage that blends your rifle into your surroundings, spray paint camo is the best way to go. In this article and video, the author shows us how to paint a gun to achieve a camo pattern for improved concealment. In the 2nd amendment world, we call it a rattle can.
Can you get epoxy paint in a spray can?
You can spray epoxy paint over a wide range of surfaces, and easily maintain and clean it. We have selected some of the best epoxy spray paint options for you to help you find the ideal paint for your next project.
What do you paint a gun with?
Generally, speaking you can't go wrong with painting a gun with Krylon or anything from Rust-Oleum. Dupli-Color could work too as it's designed for car parts which need to withstand high heat and be resistant to oil and fluids.
How do you make a camo pattern in paint?
0:571:50How to Spray Paint a Camouflage Pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by spraying on two even coats of camel army green to create the foundation. Color. Next createMoreStart by spraying on two even coats of camel army green to create the foundation. Color. Next create one or more camel stencils by drawing irregular shapes on cardboard or cardstock.
Does black walnut make good gun stock?
Black Walnut Uses Because of its low movement after seasoning, walnut is particularly suitable for gunstocks.
What is the best wood for gun stocks?
Claro is an ideal wood for gunstocks because it has good strength and bending qualities and takes finishes well. It is a beautiful wood for an affordable price. Maple: A strong and durable choice for gunstock. It is usually light in color and is favored for its beautiful figuring.
Why is walnut used for Gunstocks?
Walnut is hard, dense, and resilient. It resists warping, suffers little shrinkage and isn't prone to splitting, which is important when working with something as lively as a shotgun. It's easy to work and takes fine chequering exceptionally well.
Building a Custom Rifle Stock : 14 Steps - Instructables
Design: I spent a lot of time looking at other stocks, and although I really like the look and feel of thumb-hole stocks, the action of this particular rifle (a "toggle-bolt") is better suited to an "open saddle" type design - so after a lot of sketching and thinking, I decided to model the stock on the beautiful Sako TRG 22 (which was also convenient since a friend of mine owns one and was ...
Paul & Sharon Dressel - Custom Wood Gun Stocks: Turkish Circassian ...
Precision Stock Inletting Service. Option 1: Fully Inletted Stock Customers Action is Fully Bedded to a shop pattern or we'll use a good pattern made by customer.
Step 1: Design
Design: I spent a lot of time looking at other stocks, and although I really like the look and feel of thumb-hole stocks, the action of this particular rifle (a "toggle-bolt") is better suited to an "open saddle" type design - so after a lot of sketching and thinking, I decided to model the stock on the beautiful Sako TRG 22 (which was also convenient since a friend of mine owns one and was kind enough to lend it to me for a while to use as reference.
Step 2: Prepare the Original Stock
Prepare the Original Stock: Note: Anyone doing their own inletting can skip this step..... ;) As I mentioned before, "inletting" a rifle stock is the process of cutting out the appropriate spaces, holes, and grooves into which the rifle barrel, receiver, and trigger group will drop into and be securely supported.
Step 3: Prepare the Laminated Blank
Prepare the Laminated Blank: I ordered a standard brown-laminate stock from Boyd's Gun Stocks ( http://www.boydsgunstocks.com ) and with a little maneuvering got my template to fit perfectly. I planned to to split the laminate stock open and "sandwich" the old stock in between laminate outer "skins" about 3/8" thick.
Step 4: Glue Up
Make Me a Sammich! (OK - You're a sammich....): Once the "core" part was cured, any voids were filled with a putty made by mixing 5-minute epoxy-and sawdust. The sides were cleaned up on a belt sander once the epoxy had cured.
Step 5: Cutting the Profile
Profiling: Next step was to trace the profile onto the blank in preparation for cutting out the profile.
Step 6: Scuplting and Shaping
Tip: I break up projects into "mini-tasks" and make task lists - this helps me be efficient and focused and keeps me from feeling overwhelmed or getting burned out. This also allows me to put in just 15 or 20 minutes (enough to complete a task) and still feel like I'm making progress.
Step 7: More Sculpting and Shaping
If a picture is worth 1000 words, this Instructable has about 175K words - so I'll let them do the talking.... ;)
How to finish a rifle stock?
This involves sanding, whiskering, and applying an oil finish. Start by sanding the unfinished stock with 80-grit sandpaper, by wrapping the sandpaper around a solid wood block and rubbing back-and-forth in the same direction as the wood grain.
Why do you need a custom rifle stock?
Gunsmithing a custom rifle stock is a great way to personalize and upgrade the quality of a firearm. And it is a great way to start learning about how to design and build guns. And, for any firearms with suitable action, but a plastic stock, smithing your rifle stock from scratch is a great way to enhance the quality of your shooting experience.
What is a gunsmith?
Gunsmithing your custom rifle stock from a blank is a do-it-yourself (DI Y) project that is extremely rewarding and enhances the experience of shooting. To craft a rifle stock, a gunsmith uses knowledge of engineering, design, and artistry. The process involves inletting the action, cutting off the excess wood, sculpting the rest ...
What is a wood stock blank?
Finding and Choosing a Hardwood Stock Blank. A gunstock begins as a hardwood blank. A blank is just a block of hardwood that is ready to be customized for a firearm. But, the usable wood must first be milled from timbers. The most popular types of hardwood for rifle stocks are black or claro walnut and maple heartwood.
How to sand a stock?
Start by sanding the unfinished stock with 80-grit sandpaper, by wrapping the sandpaper around a solid wood block and rubbing back-and-forth in the same direction as the wood grain. Wet a clean rag with distilled water and use it to remove the excess dust from sanding.
What is shaping a rifle stock?
The process of shaping your rifle stock is, by far, the most meticulous and technically demanding. It is also the stage that shows the most dramatic change in your stock. With the right skills, tools, and dedication, you can see your rifle transform from a piece of wood into a purpose-built piece of craftsmanship.
What wood is used for rifle stock?
The most popular types of hardwood for rifle stocks are black or claro walnut and maple heartwood. Walnut and maple are among the densest hardwood species, which provide the durability required to support the action of the firearm. With access to walnut or maple timbers, you can square the log by cutting off the sapwood with a chainsaw, ...
How to paint a stock with a light back and forth action?
Start with the medium-size leaves and a medium-dark paint such as brown or olive green. Hold the vegetation very still, against the surface of the stock, and spray with a light back-and-forth action with the can about 6 inches away. Turn the vegetation in all directions to prevent striping–everything in nature is random.
What to use for stencils?
First, collect three kinds of local vegetation to use as custom stencils: A few medium-size leaves, some pencil-thick vegetation, such as fern fronds, and finer material like thin reeds and pine needles. Especially with pine needles and grasses, make sure there’s plenty of open structure for the paint to get through.
Why use silicone on a rifle?
The reason for silicone is simple. Its heavy, so it will help to counterbalance the rifle, and best of all, its a vibration dampener. it will suck the recoil impulse out of the firing rifle and improve harmonics. which, as long as you are a fundamentally sound shooter, will improve your groups.
Is butt stock easy to fill?
The butt stock is easier. Just fill it with a simple resin that won't conflict chemically with the polymer of the stock. I'd contact Savage about it since they are the only ones who know precisely what they used in that synthetic stock. On the other hand, you could go simple.
Can epoxy be permanently bonded?
Also a good idea to apply some in the action area of the stock, the rule of thumb is, anywhere you don't want epoxy to be permanently bonded, put release. Many things can be used as a release agent. One of the cheapest sources, and one I use myself, is Kiwi neutral shoe polish. the paste that comes in a small flat can.
How to sand down synthetic stock?
Use 180-grit sandpaper and sand down the stock surface by hand. Many synthetic stocks have parting lines running down the length of the stock, sand them down until they are flush with the surface. When preparing your stock do not use a mechanical sander since you can easily damage your stock.
Why are synthetic stocks so popular?
Synthetic stocks are very popular among modern rifles because of their durability and affordability. Unfortunately, they’re not as attractive as traditional wooden stocks. However you can easily customize your rifle stock by painting it to your liking. Epoxy-based primers and paints are particularly well suited for synthetic stocks.
How to finish a rifle stock?
This involves sanding, whiskering, and applying an oil finish. Start by sanding the unfinished stock with 80-grit sandpaper, by wrapping the sandpaper around a solid wood block and rubbing back-and-forth in the same direction as the wood grain.
Why do you need a custom rifle stock?
Gunsmithing a custom rifle stock is a great way to personalize and upgrade the quality of a firearm. And it is a great way to start learning about how to design and build guns. And, for any firearms with suitable action, but a plastic stock, smithing your rifle stock from scratch is a great way to enhance the quality of your shooting experience.
What is a gunsmith?
Gunsmithing your custom rifle stock from a blank is a do-it-yourself (DI Y) project that is extremely rewarding and enhances the experience of shooting. To craft a rifle stock, a gunsmith uses knowledge of engineering, design, and artistry. The process involves inletting the action, cutting off the excess wood, sculpting the rest ...
What is a wood stock blank?
Finding and Choosing a Hardwood Stock Blank. A gunstock begins as a hardwood blank. A blank is just a block of hardwood that is ready to be customized for a firearm. But, the usable wood must first be milled from timbers. The most popular types of hardwood for rifle stocks are black or claro walnut and maple heartwood.
How to sand a stock?
Start by sanding the unfinished stock with 80-grit sandpaper, by wrapping the sandpaper around a solid wood block and rubbing back-and-forth in the same direction as the wood grain. Wet a clean rag with distilled water and use it to remove the excess dust from sanding.
What is shaping a rifle stock?
The process of shaping your rifle stock is, by far, the most meticulous and technically demanding. It is also the stage that shows the most dramatic change in your stock. With the right skills, tools, and dedication, you can see your rifle transform from a piece of wood into a purpose-built piece of craftsmanship.
What wood is used for rifle stock?
The most popular types of hardwood for rifle stocks are black or claro walnut and maple heartwood. Walnut and maple are among the densest hardwood species, which provide the durability required to support the action of the firearm. With access to walnut or maple timbers, you can square the log by cutting off the sapwood with a chainsaw, ...
