If you have NO cartouches to protect then you might consider putting your stock in the dishwasher w/ soap. You will get more grime out, raise dents with the grain. This will lighten your stock as it dries. If still too dark you can wipe it with laundry bleach and let dry.
Full Answer
How do you lighten up a stock?
If they are still too light, rub the stock with wool where the hand guards fit on the stock, and lighten the stock until it matches the hand guards. I have found that the color is not consistent in wood, and part of a stock can be lighter or darker from another part of it.
How do you dye hand guards to match stock?
If the stock is too dark, put another coat of dye on the hand guards rub with wool, and see if they match. If they are still too light, rub the stock with wool where the hand guards fit on the stock, and lighten the stock until it matches the hand guards.
How do you clean the stock of a gun?
Coat the hand guards, too. Let sit for 30 minutes. Repeat the process with the paintbrush. Use fresh liquid, and use #1 steel wool instead of the paintbrush to scrub the stock. Do not scrub hard to smooth the surface, just enough force to get the liquid into the remaining finish.
What is the best way to refinish a rifle stock?
Refinished stocks were, however, generally refinished with linseed oil. In all cases the finished stock was simply dipped in a tank of linseed or Tung oil for a few minutes and then allowed to drain dry. Stocks that come from the CMP, whether as parts or on a rifle, are often coated with that sticky goo called cosmoline.
How to make your upper lip lighter?
So if you're interested in getting a lighter upper lip naturally, you can experiment with the following: Honey and lime juice: Mix a little honey and lime juice (you could also use lemon) and apply it to your upper lip. The citric acid in the lime juice bleaches the skin, while the honey softens and moisturizes.
How to get rid of dark hair on upper lip?
If you're concerned about the dark hair that grows on your upper lip, consider bleaching the hair or using a gentler hair removal method, such as threading.
Why is my upper lip dark?
Dark skin on the upper lip is caused by excess melanin in the skin. You can reduce the appearance of this dark pigmentation by using an over-the-counter or prescription skin lightening cream. Hydroquinone is a very effective bleaching product for dark skin.
How does wikihow mark an article as reader approved?
wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 81% of readers who voted found the article helpful, earning it our reader-approved status.
Why are my lips dark?
If you're concerned about the dark color of your lips, one of the first steps you should take is to quit smoking. Nicotine in the smoke stains your lips, leaving them dark and dull. In addition, smoking lowers the amount of oxygenated blood that reaches your face, which can leave your lips looking pale and thin.
What are the ingredients in skin lightening cream?
Tip: The most effective skin lightening ingredients include kojic acid, azelaic acid, arbutin and vitamin A , so you should look for creams containing a combination of these.
How to get rid of hyperpigmentation on upper lip?
Chemical exfoliants are also an option. Look for 1 that contains a beta-hydroxy acid, such as salicylic acid. Apply it to the skin above your upper lip to get rid of dead skin cells and hyperpigmentation.
Can you bleach teak plywood?
I once saw a shipyard carpenter take a teak plywood panel, bleach it completely white and then replace a wall panel and perfectly match it to the panels on each side. this was on a Grand Banks trawler. Perfect job.
Can you bleach gun stocks?
I have on both furniture and gun stocks used bleach. After stripping, apply bleach and place it in the Sun. It will lighten wood to some degree. And it takes a little more wood prep after using bleach. ( Don't saturate the wood,just a light coating and repeat!)
What oil do you dip M1903s in?
From a standpoint of tradition, the new stocks of the M1903s and the early M1s were dipped into a tank of linseed oil (no doubt boiled linseed oil after they figured out the advantages of a more rapidly drying finish) - Boiled linseed oil was the only thing my Dad would use on our personal ‘03. The Armory linseed “dip” was designed to preserve the stocks and to keep them from drying out prior to being issued. I have an August 1941 (Lend-Lease) gun with what would appear to have the original Armory “dipped” linseed oil finish. No effort was expended to highly polish the stock, and I rather imagine that the rifle sat in the rack in England for the duration of the war. I would say that the linseed dipping did its job well, although no one can say the stock is “pretty”... just has the appearance of being dipped in linseed oil in a time “long, long ago”, in a galaxy “far, far away” - but it amounts to a time capsule for early stock finishes, not degraded by some GI attempting to make points with his NCO or inspecting officer.
What oil was used to finish the M1?
The result was relatively waterproof, and durable... It was not chosen for its spiffy appearance, but it did the job well. The Tung Oil finish was the official finish for the M1 (and later the M14) from 1942 until the end of production of the M14.
What is the magic finish formula?
The “magic finish formula” consists of equal parts of Boiled Linseed Oil, Turpentine (essentially a solvent) and Beeswax. (1/3 rd Linseed, 1/3 rd Turpentine, and 1/3 rd Beeswax.
What was the M1 made of?
The M1 Rifle was originally manufactured with one of two finishes: linseed oil or China/Tung oil. Towards the end of WWII the linseed oil was supplanted by Tung Oil, a finish which was used, I believe, during '50's production. Refinished stocks were, however, generally refinished with linseed oil.
What oil was used in Springfield rifles?
As far as I know, all stocks finished by Springfield (and others - Win, HRA and IHC) after 1941, were finished with Tung Oil including the post WWII production rifles (including the M14). It would be hard to pin an exact date on the total changeover to the new finish, but surely by early 1942, all stocks were Armory finished utilizing the TUNG Oil process. It was intended that all FIELD maintenance of rifle stocks would continue to be linseed oil (Boiled Linseed was the favorite since it contained a drying agent, and was much more practical for the individual soldier)
Why did the government use tung oil?
The Tung Oil finish was designed to put a weather proof finish on the “just finished” rifles and was NOT meant to be used on a continuing basis as the Linseed Oil had been in times gone by. It was a “base coat” and since the Government wasn’t planning on issuing little bottles of Tung Oil to the troops , the usage of linseed oil was specified for long term “troop maintenance. Why? Well it didn’t hurt anything and kept “idle hands” busy. Linseed, judiciously applied, DOES make an attractive finish, and serves to protect the weapon.
How to remove oil from a wood stove?
Here's what I do. To strip the old finish and remove oil & dirt, I use Easy-Off Oven Cleaner (the Heavy Duty variety). Spray it on, let it soak for 10-15 minutes, and then rinse off with very warm water while scrubbing with a Scotch-Brite pad. Usually one go with the EasyOff is sufficient, but I have had to repeat the treatment up to twice more.
