How to Level for Your Stock Tank Pool
- Pick your spot Shade Consider how much shade your pool will get. This will help you keep it cool in summer months.
- Shade Consider how much shade your pool will get. This will help you keep it cool in summer months. However, if placing...
- Consider how much shade your pool will get. This will help you keep it cool in summer months.
Full Answer
How do you install a stock tank pool?
The first (and maybe most important) step is to flatten the area you are wanting to put the stock tank pool. If you don't level the pool out now, you'll have to drain the water to level it later. This is actually a simple step. Just lay down some paver sand, smooth it out, and use a level to check that the ground is level.
Do you need a base for a stock tank pool?
A galvanized stock tank pool requires a level surface with minimal slope. If your outdoor space lacks a flat surface, use a shovel and sand to create a solid, level base for your tank pool. Plan comfortable seating for those who prefer lounging over splashing, and provide an awning or umbrella for shade.
Where is the best location for a stock tank pool?
The best location for the stock tank pool is one that is completely level and flat. Be mindful of the weight, so don’t locate the stock tank on a deck. An eight-foot round stock tank pool plus water weighs about 6,000 pounds. Keep the stock tank pool within 15 feet of the house for access to the home’s GFCI outlet for the pump/filter.
What are the best ideas for a stock tank pool?
The Top 68 Stock Tank Pool Ideas. 1 1. Backyard. A galvanized stock tank pool adds nearly as much ambience to a small backyard as a traditional pool. Although small and not deep enough ... 2 2. Deck. 3 3. DIY. 4 4. Galvanized. 5 5. Large. More items
How do you level the ground for a stock pool tank?
How to Level for Your Stock Tank PoolPick your spot. Shade. ... Draw out your area. You can use a string half the diameter of your pool to draw a circle. ... Level area. Options for leveling are to dig high areas down or bring low areas up using dirt or sand. ... Check level.
Do you need to ground a stock tank pool?
Stock Tanks Are (Usually) Above Ground Being above ground, you also do not need to dig into hard ground or blast rock to sink a pool into the ground to install a stock tank pool. All that is required is a level, solid surface.
How do you prepare the ground for a stock tank?
This is actually a simple step. Just lay down some paver sand, smooth it out, and use a level to check that the ground is level. If you don't have a long enough level, use a long piece of wood to stretch across the ground and set the level on top of that board. I also cleared out some of the low hanging branches too.
How do you set up a pool stock tank?
Steps to install the stock tank pool filterMake sure that you have all of the parts you need. ... Find a spot for your pool. ... Make sure there is power. ... Choose the hole locations. ... Drill the holes. ... Attach the jet. ... Attach the strainer cover. ... Connect the plunger valves.More items...•
Should I flex seal my stock tank pool?
7:4211:24We painted our stock tank pool with Leak Seal 2 years ago... How is it ...YouTubeStart of suggested clipEnd of suggested clipSo all this to say we answer the question of whether or not our leak seal inside of the pool isMoreSo all this to say we answer the question of whether or not our leak seal inside of the pool is doing great the answer is no it's not doing. Great. If you've already painted your pool with leak seal.
How long do galvanized stock tanks last?
Stock tanks routinely last for 20+ years on farms, where they're subject to abuse by livestock, tractors, and harsh elements.
Can you put a stock tank pool on gravel?
Our stock tank pool was first on gravel and it wasn't problem. We do get asked if gravel is okay for under a stock tank pool. I can only speak from our personal experience which is that we had no problems. We did eventually have concrete poured in the area where the stock tank pool is.
Where do you cut holes in pool for stock?
You will need two holes, one at the top and one at the bottom. In an above ground pool, these aren't usually right on top of each other, but ours are. We haven't ever seen this as a problem.
How much baking soda do you put in a stock pool tank?
But overall, two 1″ tabs was the sweet spot for our pool. Baking soda – when the pool seemed cloudy (sometimes every few days), I would dissolve a 1/2 cup baking soda with water and toss it in the pool. And baking soda is not a harmful chemical so won't hurt the galvanized steel.
Can you shock a stock tank pool?
3:404:49Two SIMPLE Tips to Keep Your Stock Tank Pool CLEAN and CLEAR All ...YouTubeStart of suggested clipEnd of suggested clipJust go and use a shock. And a test strip kit which I'll put a link in the description. So that's itMoreJust go and use a shock. And a test strip kit which I'll put a link in the description. So that's it two easy tips to keep your pool nice. And clear easily.
Which is better, a round or oval stock tank?
There are two shapes of stock tanks. The round shape is better for multiple people and kids, allowing room to spread out. Oval stock tanks are long and skinny, so they're better suited for one or two people. That said, the 8’ round stock tank is by far the most popular.
How to keep pool water fresh all summer?
Step 2: Install the filter pump. One of the most important ways to keep your pool looking clean and feeling fresh all summer is to add a filter pump from Intex. It’s the perfect solution because it filters debris and circulates water.
How long does a pool filter last?
In addition, you’ll need to replace the filter occasionally, which can last between 2 weeks and 2 months, depending on much dirt and debris gets in your pool. More details are in the video below. Here is the kit we recommend: If playback doesn't begin shortly, try restarting your device.
How many adults can a 6' watering hole hold?
6' diameter ( The Watering Hole) is good for couples or small families - the 6' tank can hold two adults easily. 3' x 8' (2' tall) this is the largest oval tank. It can hold up to two adults, or one comfortably. Bonus: it has room for your air mattress! 2' x 6' (2' tall) holds one adult comfortably or two kids.
Can you put stock tanks on a deck?
Decks We highly recommend against placing stock tank pools on decks, due to their weight. However, if you decide to place it on a deck, be VERY careful about weight. An 8' stock tank weighs as much as a large SUV when filled, so be sure the structure can hold it.
Can you leave a child in a pool?
NEVER LEAVE CHILDREN UNATTENDED IN A POOL. Pools present a drowning risk, no matter their size or depth. Children should never be left unattended in a pool, whether stock tanks or not. Even though a stock tank is 2' shallow they still present a drowning and safety hazard.
How much does a stock tank pool cost?
A full inground pool will run you $37,000 on average, but a stock tank pool will only set you back about $200 to $500, depending on the size and type you get. You also need to factor in the cost of maintenance, but those monthly costs will be much lower than an inground pool as well.
Is a plastic pool better than a metal tank?
However, plastic pools are also less durable and more pro ne to cracking. Metal tanks are pretty much the opposite. Heavier, more susceptible to rust and corrosion, and heat up a lot easier. However, they are also going to be a lot more durable and it’s going to be easier to clean and remove algae.
Is a stock tank pool good?
Stock tank pools have exploded in popularity in recent years and for good reason – they are an affordable way to have a relaxing swimming pool environment in your backyard, even if they aren’t big enough for swimming. Below are some of the basics when it comes to stock tank pools, some of the main benefits, watch outs, design inspiration, ...
Do stock tank pools need to be cleaned?
Cleanliness. Even though it’s less expensive and easier to setup, stock tank pools are not immune from cleanliness issues. Stock tank pools require the proper filter and pump equipment and a regular maintenance schedule to make sure they are free of algae, bacteria, and other contaminants. Make sure to clean your pool regularly ...
What to do if you don't level a pool?
If you don't level the pool out now, you'll have to drain the water to level it later. This is actually a simple step. Just lay down some paver sand, smooth it out, and use a level to check that the ground is level. If you don't have a long enough level, use a long piece of wood to stretch across the ground and set the level on top of that board.
Where should the inlet be on a pool?
The inlet should be toward the bottom 2/3 of the tank side wall while the outlet should be towards the top 2/3 of the tank side wall (in the 1st image you can see the inlet on the left and the outlet on the right) The cold water will then be circulated towards the top of the pool and help keep the water cool.
Where does the inlet hose go in a pool pump?
The process is easy - the inlet hose goes into the wide section of the pump (labeled with a red arrow) and the outlet hose goes into the tall canister (labeled with a blue arrow). Don't plug in or turn on the pump until you have enough water filled in the pool to cover the inlet/outlet!
How to level a pool with sand?
Dig away so il instead of building up low patches. Always dig away slopes and high spots to make them level with lower areas, even if it takes more work. If you fill in a patch with dirt or sand, the weight of the pool and water will compress it and cause problems in the future. ...
How to check for levelness of wood?
Do a visual inspection to check for any spots that are higher or lower than the rest. After taking care of these areas, lay a wood plank across your work area. Zip tie a 6 ft (1.8 m) carpenter’s level on top of the plank, and move the plank throughout the work area to test multiple spots .#N#Position the plank and level from the center of the work area to its edge, like a clock's hand. Check for levelness, then rotate the plank 2 to 3 feet (0.61 to 0.91 m), like a clock hand moving from 2 o'clock to 4 o'clock. Proceed shifting the plank and checking levelness every 2 to 3 feet.
How do I fill a pool drum?
Fill it up, then push it over the leveled ground to compact the soil. Spread and tamp a layer of sand over the area. Many pool manufacturers call for a layer of sand, but check your owner’s manual to stay on the safe side.
How much fungicide should I use for a pool?
The amount you'll need also depends on your pool's area but, at most, you'd probably need 1 gallon (3.8 L) each of ready to use fungicide and herbicide. Make sure you use petroleum-free products. Ready to use products that don't require dilution are easier to use than concentrates that need to be mixed with water.
How to test multiple spots on wood plank?
After taking care of these areas, lay a wood plank across your work area. Zip tie a 6 ft (1.8 m) carpenter’s level on top of the plank, and move the plank throughout the work area to test multiple spots. Position the plank and level from the center of the work area to its edge, like a clock's hand.
How to compact soil after raking?
After raking it clean, water the soil with a garden hose, then run a rolling tamper throughout the work area to compact the soil. To compact the soil more effectively, run a soaker hose or sprinkler at low pressure for about an hour before you roll or tamp the area.
How do I remove sod from a pool?
Covering the grass with plastic sheets or tarps for a couple of weeks will kill the grass in the area. This will make it much easier to remove the sod. Place plastic sheets over the area where you will be installing the pool and weigh them down on the edges with heavy objects, such as rocks, bricks, or cinder blocks.
Creating a level sand base for Stock Tank Pool on an uneven patio
I have joined the ranks of the many folks who have created mini-pools/hot tubs from galvanized steel stock tanks. We have the tank located on a underused patio of river rock that we don't want to remove or dig up. Patio has slight variations in height from the natural river rock and is NOT level.
Comments (9)
Go the extra mile; site and mark your diameter, break-up the flagstone within the circle and remove it. Now you can rough level the ground and install steel edging. Builder's sand (aka C-33) goes down and a plate compactor is used.
How big is a stock pool?
Although stock tanks go up to 10 feet in diameter , you may want a smaller tank pool. Not only is a smaller stock tank cheaper, you will use less water—important if you live where outdoor water use is restricted or water is very expensive.
How big is a round stock tank pool?
The most popular style of tank pool is an 8-foot round galvanized stock tank, but they can be found up to 10 feet in diameter . Round tank pools are best for kids and for multiple people to use at once.
How deep is a stock tank?
Made from galvanized metal or plastic, they have become an affordable small pool alternative. Although a DIY stock tank pool is only about two feet deep, it’s sufficient to cool you down on hot summer days.
What is an oval stock tank pool?
An oval stock tank pool provides the length you need to stretch out under the water. Note that oval tanks can be very narrow, especially those shaped like a water trough. However, they are great for creating an inviting pool area in a small backyard. 7.
How big is a galvanized pool?
The largest galvanized round tank pools are about 10 feet in diameter . The largest oval or oblong tank pools average three feet wide and eight feet long. You can purchase plastic stock tanks, but they’re more expensive and not as attractive. Source: @blossomsbyjilliann via Instagram.
What shape is a stock tank?
Stock tanks are available in oval or round shapes. The shape you choose may depend on how much room you have for your stock tank pool, or simply a preference for one shape over another.
Can you put a tank pool on top of a deck?
But don’t try to place your tank pool on top of an existing deck. Even a small stock pool is extremely heavy when full of water, and few decks are built to support such weight. Another alternative to a ground-level deck is building a bench-style enclosure that is level with the top of the tank.
