How to Set Up a Stock Tank Pool: A DIY Guide
- Drill the Outlet Port. Drill a hole with a 2 3/4-inch hole saw between ridges on the pool. ...
- Add the Outlet Port. Look through your pump filter kit for the outlet port assembly and note the order of the pieces shown on the enclosed instruction diagram.
- Add an Inlet Port. ...
- Attach External Parts and Hoses. ...
- Fill and Test for Leaks. ...
Full Answer
How do you install a stock tank pool pump?
Assemble the pump according to its instructions. Drill holes through the top and the bottom into the side of the tank. You want the hoses to fit snugly into the holes. Thread seal tape around the hole or use gaskets to prevent leaking. Fill your DIY stock tank pool with water.
Can you use a stock tank to make a DIY pool?
Stock tanks make excellent DIY pools, but you can’t just fill the thing with water, throw in a chlorine floater, and start swimming. While this might work in the short term, all pools need circulation and filtration in order to maintain the water all season.
Do stock tank pools need to be on level ground?
Stock tank pools need to be placed on level ground in order to maintain the correct water level and ensure your filter system runs smoothly. If you’re lucky enough to have a perfectly flat surface in your yard, this part will be easy. Otherwise, you may need to do some digging to redistribute the soil and level off the ground.
How do you seal a stock tank pool to prevent leaks?
Drill holes through the top and the bottom into the side of the tank. You want the hoses to fit snugly into the holes. Thread seal tape around the hole or use gaskets to prevent leaking. Fill your DIY stock tank pool with water. Check the entire tank for leaks.
How do you install a stock pool tank?
0:005:27Stock Tank Pool DIY! Easy Backyard Plunge Pool | How To BuildYouTubeStart of suggested clipEnd of suggested clipWe got lucky and already had a level concrete slab in place otherwise ground prep with sand wouldMoreWe got lucky and already had a level concrete slab in place otherwise ground prep with sand would have been necessary to level and prepare a spot in the yard.
How do you prepare the ground for a stock pool tank?
This is actually a simple step. Just lay down some paver sand, smooth it out, and use a level to check that the ground is level. If you don't have a long enough level, use a long piece of wood to stretch across the ground and set the level on top of that board. I also cleared out some of the low hanging branches too.
What kind of pump do you need for a stock tank pool?
The pump most commonly used by DIY stock tank pool owners is the 1,500 GPH Intex filter pump, which can be found for under $200. If you have a smaller tank and want to save a little money, you can try a 1,000 GPH Intex pump, available for just over $100.
Do you need to ground a stock tank pool?
Stock Tanks Are (Usually) Above Ground Being above ground, you also do not need to dig into hard ground or blast rock to sink a pool into the ground to install a stock tank pool. All that is required is a level, solid surface. That said, it is possible to sink a stock tank pool into the ground.
Can you put a stock tank pool on gravel?
Our stock tank pool was first on gravel and it wasn't problem. We do get asked if gravel is okay for under a stock tank pool. I can only speak from our personal experience which is that we had no problems.
How big does a stock tank need to be for a pool?
Generally speaking, stock tanks used as pools should have a length or diameter of at least 5 feet and a capacity of at least 80 gallons, equating to the size and capacity of an average bathtub.
How do you keep a stock tank pool clean?
2:584:49Two SIMPLE Tips to Keep Your Stock Tank Pool CLEAN and CLEAR All ...YouTubeStart of suggested clipEnd of suggested clipI find just putting a couple of chlorine tablets in each week. Does the trick and is all that youMoreI find just putting a couple of chlorine tablets in each week. Does the trick and is all that you need to keep your stock tank cool nice and clear.
How do I keep my stock tank clean?
Add one-part household chlorine bleach per 32 parts of water. Let the water sit for 15 minutes. Drain and scrub the tank wall. Rinse the tank; refill it with clean, fresh water.
Do stock tank pools get hot?
A: Nope! The metal tank only gets as warm as the water in the tank. So keep it filled to keep it cool!
Is a stock tank pool a good idea?
With a stock tank pool, you can really check the chlorine twice a week and have a decently clean pool. I always skim the pool when we use the pool with a hand skimmer for leaves, bugs, and larger debris that may have fallen in. It's pretty simple to keep the water clean.
How much does an 8 foot stock tank cost?
This could be anywhere from $350-$1200. You can find smaller sizes for less but most people are looking for at least an 8 ft. stock tank.
What do I need to know about stock pool tanks?
14 Reasons You Need a Stock Tank PoolThey Don't Take up Much Space. ... They Have That Down-Home, Farm Connection. ... They're Built to Last. ... They Are Inexpensive. ... A Do-able DIY Project. ... They're Easy to Clean. ... It's Fun for All. ... They're Photogenic and, Yes, Trendy.More items...•
How much does a stock tank pool cost?
A full inground pool will run you $37,000 on average, but a stock tank pool will only set you back about $200 to $500, depending on the size and type you get. You also need to factor in the cost of maintenance, but those monthly costs will be much lower than an inground pool as well.
Is a plastic pool better than a metal tank?
However, plastic pools are also less durable and more pro ne to cracking. Metal tanks are pretty much the opposite. Heavier, more susceptible to rust and corrosion, and heat up a lot easier. However, they are also going to be a lot more durable and it’s going to be easier to clean and remove algae.
Is a stock tank pool good?
Stock tank pools have exploded in popularity in recent years and for good reason – they are an affordable way to have a relaxing swimming pool environment in your backyard, even if they aren’t big enough for swimming. Below are some of the basics when it comes to stock tank pools, some of the main benefits, watch outs, design inspiration, ...
Do stock tank pools need to be cleaned?
Cleanliness. Even though it’s less expensive and easier to setup, stock tank pools are not immune from cleanliness issues. Stock tank pools require the proper filter and pump equipment and a regular maintenance schedule to make sure they are free of algae, bacteria, and other contaminants. Make sure to clean your pool regularly ...
What You Need Before Starting
Like every DIY project, you’ll need a few things on hand to ensure everything goes smoothly:
DIY Stock Tank Pool (Step-by-Step)
Below are the individual steps for converting an ordinary stock tank into a fully-functioning stock tank pool:
Choose a Location
Choose a flat area in your outdoor space. You’ll need a spot that’s sunny enough to keep the water warm. Select an area that has access to electricity for the pool pump. Allow enough room for tables, benches or other accessories.
Pick a Stock Tank
The best stock tank pool ideas depend on choosing the right tank style and size. Galvanized metal is popular, but there are plastic ones as well. Metal stock tanks are low maintenance and warm water faster on a sunny day. They are also heavy and can rust. Plastic tanks are lighter but can crack over time.
Add a Pool Pump
Start by cleaning the stock tank thoroughly. Scrub it with soapy water or use a pressure washer. Next, add a small pool pump to filter the water and prevent algae buildup.
Seal and Fill the Pool
Fill your DIY stock tank pool with water. Check the entire tank for leaks. Mark any leaks.
