- Boot your device into download mode using the same method as described above. The only difference being that this time you have to replace the Volume ...
- Now double click on the Odin3 v3.04.exe file to run the Odin3 flasher program.
- Connect your Galaxy S3 to your computer via USB cable.
- You should see the ID:COM port at Odin3 turn Blue with “0: [COM7]” text and “Added!” text at the Message box below. This shows that your phone has ...
- Make sure that only the “Auto Reboot” and “F. Reset Time” options are checked on the Odin.
Full Answer
How to go back to stock on Samsung phones?
Nov 10, 2012 · Flash the Stock Firmware on Samsung Galaxy S3: Boot your device into download mode using the same method as described above. The only difference being that this time you have to replace the Volume ... Now double click on the Odin3 v3.04.exe file to run the Odin3 flasher program. Connect your Galaxy ...
How do I fix a soft-bricked Samsung Galaxy device?
May 02, 2014 · hi i am trying to figure out how root myphone and install stock android on it. is it possible? the instruction on the sticky thread has a zip file that is not working : ... root + install stock android on galaxy s3. Similar Threads. htc one no longer on Google Play Store. By Skyhook1 in forum Verizon HTC One Replies: 3
How do I open a CSC file on my Android?
You can't install the stock ROM zip like as custom rom. Extract the stock rom zip and you will get the .tar PDA file to flash via ODIN. Download ODIN 1.85 and also install Samsung USB driver and then reboot your phone in download mode by pressing three combo key VOL Down+ Home+ Power button. Now connect it to pc while ODIN is opened on PC.
How to fix Samsung Galaxy should logo unbrick?
Jul 03, 2012 · Enable “Unknown sources” under the Settings » Security menu on the device, so that you can install applications from SD Card. Open the file manager app and go to where you transferred the APK file in Step 3. Find and tap on the file to begin installation procedure and it will be installed in less than a minute. That’s it.
Is flashing ROMs bad for Samsung?
Warning: Rooting and flashing ROMs does come with risks, but considering Samsung isn't supporting your device any longer and it is more than likely out of warranty, unless you really can't afford to get a new device if something goes terribly amiss, you should be fine. Just follow the steps outlined below carefully, and if you're not sure, ...
Is there still life in the Galaxy S3?
There's still plenty of life left in the Galaxy S3, especially with KitKat. / © Samsung. 1. Make sure you have the relevant drivers for the Galaxy S3 installed on your computer (should happen automatically the first time you plug in with a USB cable) and that you have USB Debugging enabled in the Developer Options.
How to go back to stock on Samsung?
Back To Stock: If you wish to go back to stock on your Samsung device, simply installing a firmware using Odin will do it. Whatever customization you had done will be gone, like custom recovery, custom kernel, root access, etc. The device becomes as good as new software-wise.
How to install Samsung USB driver?
Step 1. Make sure you have downloaded the firmware on your PC. Search our site for it if you don’t have it already. Step 2. Install Samsung USB driver (method 1 on the linked page) first of all. Double-click the .exe file of drivers to begin the installation. (Not required if you have already done this.) Step 3.
How to select AP text?
Click on the AP tab, and select the file beginning with AP text.
What to do if your Samsung phone is not starting?
Unbrick: If your Galaxy device is not starting properly and is stuck in the boot loop situation and thus rebooting after should the logo, then installing a firmware will fix that too. It serves as a good fix for soft-bricked devices.
How to use Bixby on a phone?
If your device has a Bixby button, then use Volume down + Bixby + Power buttons together
Can you have only one firmware file?
One firmware file? If you got only one firmware file after extracting the zip , it’s okay too. It would begin with AP and has to be loaded to the AP tab in Odin. Ignore other tabs in Odin. That’s it.
Does Samsung have firmware?
Note: The guide for installing a firmware remains the same for all Samsung devices. Yes, ALL Samsung devices. So, whether you own a new or old Galaxy phone or tablet, feel free to use the guide below.
