Guide: How to Install Subs and Amp in a Stock Radio (G6) Step 1: Running the Power Cable. After looking through many posts about this, we came to the decision of running it... Step 2: Hooking up your Output Converter We used the Scosche FAI-3 converter ( http://www.walmart. Step 3: Setting ...
Videos of How To Install a SUB and Amp on Stock Radiobing.com/videos
It is possible to hook up a subwoofer to a stock stereo and with the right equipment, the process isn’t too difficult. You will need an amplifier, subwoofer, amplifier wire kit, and a line-out converter to correctly hook up a subwoofer to your car’s stock stereo system.
Can you hook up a subwoofer to a stock car stereo?
So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good. If you’d like to know more about how to get a killer system set-up in your car without swapping your stereo, give us a call at 510-527-9888.
Can I install a subwoofer and amplifier to my factory system?
This has been the tried-and-true method of installing bass systems to factory stereos for decades. It’s just a simple little converter that ties into your speaker wires and provides RCA inputs.
How do you add bass to a factory stereo?
Locate the remote wire on the LOC (it is usually blue) and attach it to the remote wire you just connect to the amplifier. You may wish to splice the wires to join them together effectively (make sure this is done when there is no power running through the wires).
How do I connect my Loc to my amplifier?
Images of How to Install A Sub and Amp On Stock radiobing.com/images
Can you hook up an amp and subs to a stock stereo?
Adding a subwoofer to a factory stereo is an excellent method to boost your sound while retaining your factory controls. The nifty devices can produce bass and sub-bass sounds at low frequencies. Thankfully, it's pretty simple to wire one into an existing car stereo system.
Can you add a subwoofer to a stock radio?
So now you know – it's definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good. If you'd like to know more about how to get a killer system set-up in your car without swapping your stereo, give us a call at 510-527-9888.
How do you hook up an amp to a stock radio?
6:258:28How to install an amplifier to factory radio - YouTubeYouTubeStart of suggested clipEnd of suggested clipPositive and negative is gonna go to the driver side positive negative my two gray solid gray andMorePositive and negative is gonna go to the driver side positive negative my two gray solid gray and gray with the black stripe the one with the black stripe is the one that's negative. So positive.
How do I hook up my amp and subs to my car stereo?
How to Connect A Car Subwoofer to An AmplifierLay the Power Cables. ... Find a Good Metal Ground. ... Plug RCA Plugs Into Subwoofer Output On Receiver. ... Use Speaker Wires To Connect The Subwoofers To The Amplifier. ... Connect the Power Cable to Battery.
Do you need a line output converter for subwoofer?
A: Yes, definitely. Amplifiers that offer speaker-level inputs don't require a separate line output converter to tap into existing speaker wires to get their signal. Many powered subwoofers offer this feature, too. The speaker-to-line level conversion is done inside the amplifier.
Do I need to bypass factory amp?
Bypassing the factory amp takes a little more work because you have to run the bypass harness to the factory amp, which is often located in some other part of the car. It's usually worth the extra effort because you'll get better sound from your new stereo, even if you're keeping those factory speakers.
Can you install an amp without RCA jacks?
Determining the Compatibility of Amp A car audio system usually has an RCA plug but some stereo system units lack RCA jacks. Don't worry as you can still install an amp without using RCA cables. You just have to make sure that the factory radio can accept speaker-level inputs or line-level connections.
How do you wire up a sub and amp?
11:5314:22How to install an amp and sub in your car | Crutchfield video - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the side of the amplifier. On the other side is where our power and ground and speaker wires allMoreOn the side of the amplifier. On the other side is where our power and ground and speaker wires all connect. So we'll start with the power wire that first wire that we ran. Go ahead and strip.
Do RCA cables go to input or output on amp?
RCA cables and speaker wire. Amp wiring kits often don't include signal wiring. Your amplifier gets its input signals from the receiver's output typically via RCA cables.
How do you hook up a amp to a factory car stereo?
The best way to connect it to a factory system is to tap into the stereo's speaker outputs for the amp's input signal. Then send the amp's outputs back to the stereo's harness, and on to the speakers through the factory wiring.
How do you hook up a subwoofer to a stereo?
Connect. If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver's subwoofer output to the subwoofer's line input (pictured above). If the subwoofer has an input labeled LFE, use that one.
How do you hook up a subwoofer to a car radio?
4:306:58How to connect a subwoofer to a car stereo without an amp - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis LFE port is specially made for subwoofers. Only. For this what you need to do is to connect theMoreThis LFE port is specially made for subwoofers. Only. For this what you need to do is to connect the LFE jack in the receiver to the line in or in Jack. Available in the box of the subwoofer.