Wiring in an amp and subs to your stock radio isnt really that hard ofnbsp The best way to connect it to a factory system is to tap into the stereosnbsp Before an impact on badoo today. That way adding an upgraded subwoofer and bass amplifier to a stock head unit can be an easy installation, and fully adjustable with thisnbsp
Full Answer
How do you wire an amp to a stock stereo?
If you have a stock stereo and you have the remote wire there you want to in twine the remote wire with the power wire before inserting in the power slot for amp. The remote wire tells the amp to turn on.
How do you hook up a subwoofer to an amplifier?
Connect the left channel on the subwoofer to the left channel on the amplifier and the right channel on the subwoofer to the right channel on the amplifier. If there is a separate power cord for the sub, you may need to attach this to the amp as well.
How do you hook up an amp to a car?
Place the amp where you want it, then attach the ground (black or brown) wire to the amp. Ground it to a piece of bare metal (not painted); most people unscrew a bolt from a seat attach the wire and screw it on.
How do you hook up a red power cable to an amplifier?
Hook up the red power cable from the battery to the amplifier. If the open end of your power cable is a loop and the opening for your power cable is a slot, use wire cutters to strip the end of the cable and expose a 0.5–1 in (1.3–2.5 cm) length of copper wire. Slide it into the opening and press down on the latch to close the connection.
Do I have to use both voice coils on subwoofer?
No, in most cases using one voice coil is fine although you'll get the most performance by using both. Dual voice coils offer more power handling,...
How do you wire a dual voice coil?
To wire a dual voice coil be sure to observe speaker terminal polarity and wire both coils the same way. For series connections, connect the coils...
Can you wire a single voice coil sub to a dual voice coil?
Yes, various speaker impedance Ohm loads can be achieved by wiring single and dual voice coil subwoofers together. Connect them the same way as sin...
What is the difference between a car stereo and a home stereo?
Home stereos, on the other hand, have higher voltage available and can use a higher speaker impedance (8 ohms, typically).
Why do you wire speakers in parallel?
Because of how they work, you’ll get the most power from your amp and to each speaker when they’re wired in parallel. Parallel speaker wiring is generally best for audio speaker systems like in the car or home.
Can you use two voice coils on a subwoofer?
Dual voice coil subwoofers can be used with one or both of their voice coils, although you won’t be able to drive with the same amount of power as you could using both voice coils. They can also have somewhat different behavior and lower heat handling depending on the design when using only one set of speaker terminals.
Do you run the amp wire to the negative wire?
Run the amp’s negative wire to the negative wire of the second set. In both cases, with dual voice coil speakers, it’s extremely important to use the same speaker wire polarity. That’s because the magnetic field polarity – and which direction the voice coils will try to move the speaker – are directly related.
Is there a free lunch on speaker wiring?
It’s important to understand that there’s no “free lunch” as the expression goes when it comes to speaker wiring, amp power, and speaker power. There’s only so much power or heat an amp can produce or handle. It makes a big difference how you wire your speakers to your amplifier or car stereo.
Can you wire subwoofers to the same ohms?
Wiring the subwoofers in a way that’s the best available option for power and at the same or higher Ohms rating, the amp is rated for. Sometimes it doesn’t work out for the best amplifier power if you’re trying to use subwoofers that can’t be wired to the same min. Ohms rating as the amp for its maximum power output.
How to hook up a power cable to an amplifier?
If the open end of your power cable is a loop and the opening for your power cable is a slot, use wire cutters to strip the end of the cable and expose a 0.5–1 in (1.3–2.5 cm) length of copper wire.
How to compensate for a subwoofer and amp?
To compensate, connect a line out converter to your head unit by connecting the right channel and left channel in the line converter to the right channel and the left channel in the head unit with RCA cables.
How to connect a battery to a positive terminal?
Connect a power cable to the positive terminal of your vehicle battery. Pop the cover and unscrew the bolt on your positive terminal. With the bolt removed, slide the open loop of your power cable over the screw for your positive terminal.
How to feed power wires into a car?
Poke a hole in the rubber next to your firewall to feed the power wire through. Use a small knife to poke a hole right next to the opening where all of the other wires in your vehicle feed into the vehicle. On most vehicles, the wires run to the glove box on the opposite side of the engine.
How does a speaker system work?
Overall, the system will function by using power from the vehicle’s battery to power your amp and the line converter will convert the signal from your head unit to the amplifier. You may need to purchase additional speaker wire or RCA cables outside of your wiring kit. Steps.
How to connect a single DIN head unit to a line out converter?
Some single-din head units come with a slot for a line converter directly underneath it. You probably need to use RCA cables to connect the head unit to the line out converter. You may need to plug a cable into the output port on the head unit and run it into the input port on the line out converter.
How to unlatch hood from engine?
Press the button or pull the lever in your vehicle to unlatch the hood from the engine. Raise the hood of your vehicle and lock it in place. If you can, do this indoors. Wiring a sub, amp, and head unit can take quite a bit of time and you’ll have to have quick access to a lot of tools.
Why won't my subwoofer sound the same?
The reason is that you’re not enhancing the voltage of the stereo, and therefore aren’t giving it the proper “juice”.
What is a JL Audio LOC 22?
The JL Audio LOC-22 is a great example of a premium line out converter: This little puppy can even work if you have a premium factory system in your car – but still want to get more bass. It takes the hi-level signals ...