- Head to our Nexus 6 ROMs section and choose the ROM you want to use.
- Click the download link there to download the ROM to your desktop.
- Plug the device in via USB.
- Copy the ROM to the internal storage of the device (do not unzip it).
- Turn off the phone and turn it back on by holding down Volume Up and Power.
- Tap Volume Up to highlight Recovery and Power to select it.
- Select Backup and swipe to perform the backup (handy for later for sure).
- Tap Wipe.
- Tap Install Zip
- Select the .zip file for the ROM you copied to the Nexus 6.
- Tap Reboot.
- Repeat this section to flash a different ROM and continue to do so until you find one you like.
How do I flash factory image nexus?
Flash Factory Image to Your Google Nexus DeviceStep 1: Download the Image. ... Step 2: Download Some Android SDK Files. ... Step 3: Unzip the Image. ... Step 4: Copy the Commands. ... Step 5: Boot Into Bootloader. ... Step 6: Flash the Image. ... Step 7: Optional: Lock Your Bootloader. ... 4 Comments.
How do you flash a factory image?
Step 1Install ADB & Fastboot on Your Computer. ... Step 2Enable OEM Unlocking. ... Step 3Put Your Phone into Bootloader Mode. ... Step 4Open an ADB Shell on Your Computer. ... Step 5Unlock the Bootloader. ... Step 6Download the Factory Images. ... Step 7Flash the Factory Images. ... 9 Comments.
How do I flash a factory image in pixels?
How to Flash Factory Image on Google Pixel DevicesDownload the factory image specific for your Pixel device to your PC, then unzip it to a separate folder.Setup ADB and Fastboot on your PC.Enable USB debugging on your Pixel device.Connect your Pixel device to the PC with a USB cable.More items...
How do I flash my Nexus 5?
To flash the system image: Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device. For example, to put a Nexus 5 ("hammerhead") into fastboot mode, press and hold Volume Up + Volume Down + Power as the device begins booting up.
How do I flash a stock ROM?
How to Flash a Stock ROMFind a stock ROM for your phone. ... Download the ROM to your phone.Back up all your data.Boot into recovery.Select Wipe to factory reset your phone. ... From the recovery home screen, select Install and navigate your way to the stock ROM you downloaded.Swipe the bar to begin installation.
What is Android_product_out?
ENVIRONMENT. ANDROID_PRODUCT_OUT. This variable should be set to the root of the directory where the images for the specific product is stored. ANDROID_SERIAL. Thie variable can be used to specify the device serial number.
How can I flash my Android phone?
How to flash a phone manuallyStep 1: Backup your phone's data. Photo: @Francesco Carta fotografo. ... Step 2: Unlock bootloader/ root your phone. The screen of a phone's unlocked bootloader. ... Step 3: Download custom ROM. Photo: pixabay.com, @kalhh. ... Step 4: Boot phone into recovery mode. ... Step 5: Flashing ROM to your android phone.
What is factory image?
A Factory Image is a 'clean' copy of your operating system with all the required drivers and programs pre-installed.
What is an OTA image?
This page provides links to over-the-air (OTA) Google Pixel device images and describes how to apply an OTA update to a supported device. Applying an OTA image can help you recover a device that received an OTA update for an Android 12 QPR beta build but would not start up after the update was installed.
How big is the download size on Nexus 6P?
The download size is nearly a gigabyte, so depending on your internet speeds it could take a little while.
What to do if fastboot device does not work?
Note: If the fastboot devices command does not work, then you will have to boot your phone through setup, skip all of the settings, and re-enable USB debugging like we did above.
What is Minimal ADB and Fastboot?
Minimal ADB and Fastboot is an excellent tool for flashing your Nexus device. There is no need to download the whole Android SDK. This tool was made by shimp208 over an XDA and it installs the latest version of ADB and Fastboot very easily and quickly. The size of the tool is only 2 MB.
Can you flash factory images on Nexus?
If you ever encounter an error, want to unroot, or return your device to stock, then all you have to do is flash the factory images on your device.
Requirements
Before you start working on this tutorial, you’re going to need a few things set up already. The first thing that you will need to do is install the Google USB drivers onto your computer. You can click here to download them and if you need assistance installing them then you can follow the instructions listed here.
Explanation
After you have downloaded the stock firmware that you want to install onto your Nexus 6, you’ll need to extract it and move the contents of that folder (which is a collection of files) into the same folder that you installed the ADB and Fastboot tools into. You can look at the image below to get an idea as to what this folder should look like.
