To remove fan drive assembly with a wrench, use 36mm or 1 7/16″ wrench (some use a 1 1/2″ wrench). You may need to whack the wrench with a hammer to break the nut loose. The fan hub can be held with channel lock pliers or you can use a 3/8″ breaker bar on the belt tensioner to tighten the belt.
Full Answer
How do you remove the radiator fan?
The thread is left hand; from the front of the engine you turn the wrench to the right (toward the driver side). Do this when the engine is cool. Some people pull the entire fan/hub assembly out past the radiator shroud, others remove the fan first, then remove the hub.
How to remove fan drive assembly with a wrench?
To remove fan drive assembly with a wrench, use 36mm or 1 7/16″ wrench (some use a 1 1/2″ wrench). You may need to whack the wrench with a hammer to break the nut loose.
How do I remove the fan clutch?
So far, I know I need a special spanner tool to hold the fan clutch in place while I turn the 36mm long nut counter clockwise. if you take a 36mm wrench and hit it with a hammer, you will break it loose, then you can spin it off by hand.
How do you remove the fan hub on a whirlpool washing machine?
To remove fan drive assembly with a wrench, use 36mm or 1 7/16″ wrench (some use a 1 1/2″ wrench). You may need to whack the wrench with a hammer to break the nut loose. The fan hub can be held with channel lock pliers or you can use a 3/8″ breaker bar on the belt tensioner to tighten the belt.
How do you disengage a fan clutch?
0:402:07HOW TO REMOVE A FAN CLUTCH 2 MINUTES! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo with the just pull right on the fan out we can begin striking it downward. There we go came looseMoreSo with the just pull right on the fan out we can begin striking it downward. There we go came loose. Now we can remove our pipe wrench. Here.
Which way do you turn a fan clutch to remove it?
1:265:41which way do turn the fan clutch to remove it? - YouTubeYouTubeStart of suggested clipEnd of suggested clipCounterclockwise then you have to rotate it counterclockwise to loosen it. And then clockwise toMoreCounterclockwise then you have to rotate it counterclockwise to loosen it. And then clockwise to tighten it so just like a regular bolt lefty loosey righty tighty.
How do you remove a fan clutch without a water pump?
1:063:47How To Remove A Clutch Fan Without Special Tools! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what i'm going to do is use the mallet. And just tap down on top of the wrench and then thatMoreAnd what i'm going to do is use the mallet. And just tap down on top of the wrench and then that should shock it. Off. Of course while pushing on the wrench to rotate. It clockwise and there we go.
How do you change a fan clutch on a Dodge Ram?
4:2213:1803-07 Dodge Ram 2500 Fan Clutch replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt this way counterclockwise to loosen it. Now they have a special they sell a special tool for thisMoreIt this way counterclockwise to loosen it. Now they have a special they sell a special tool for this uh a special fan wrench and a holder to hold the the clutch down there and everything.
How do you use a clutch fan removal tool?
0:171:15OEMTOOLS 27186 Fan Clutch Wrench Set, 5-Piece - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou may need to loosen the bolts to provide a more secure. Hold select the appropriate slim styleMoreYou may need to loosen the bolts to provide a more secure. Hold select the appropriate slim style wrench to loosen the fan clutch nut place the slim style wrench on the fan clutch nut reference.
How do you remove a fan?
0:592:08How to Remove a Ceiling Fan | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide the ball at the end of the downrod out of the mounting bracket. And then lower to the groundMoreSlide the ball at the end of the downrod out of the mounting bracket. And then lower to the ground to remove a flush mount fan access the wires by removing the canopy.
Do I need a fan clutch tool?
The truth is that the fan clutch can be impossible to remove without a fan clutch removal tool designed specifically for this one task. The fan clutch spins freely when it is cool and the shaft it is attached to on the water pump also spins very little resistance.
How does a radiator fan clutch work?
A fan clutch is a thermostatic engine cooling fan that can freewheel at low temperatures when cooling is not needed, allowing the engine to warm up faster, relieving unnecessary load on the engine. As temperatures increase, the clutch engages so that the fan is driven by engine power and moves air to cool the engine.
How do you remove a pulley from a water pump?
1:374:56Removing Water Pump Pulley Without Using Impact Wrench - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're gonna wedge it between two of the bolt heads and then put the other end of the screwdriverMoreAnd we're gonna wedge it between two of the bolt heads and then put the other end of the screwdriver against the frame. And then on the third one we'll put our 10 millimeter box wrench.
Where is the radiator fan?
The car radiator fan is found between the engine and the radiator, although some radiator fans are found at the front or anterior part of the radiator. Electric fans are found in the front part of the radiator and are also referred to as “pusher fans”.
How do you remove the fan clutch on a 1999 Dodge Dakota?
0:354:22How To Replace Radiator Fan Clutch 1997-2004 Dodge Dakota - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo best thing to do is leave the belt. On so that you can loosen up the fan clutch. And i'm gonnaMoreSo best thing to do is leave the belt. On so that you can loosen up the fan clutch. And i'm gonna use a pneumatic uh air fed clutch tool.
How do you remove the fan clutch on a 2006 Dodge Cummins?
2:257:103rd Gen 5.9 Cummins Fan Clutch and Fan Shroud Removal VideoYouTubeStart of suggested clipEnd of suggested clipAnd we're going to just grab the fan shroud. And get it off of those studs. That's probably theMoreAnd we're going to just grab the fan shroud. And get it off of those studs. That's probably the hardest part of removing the fan shroud is getting all four bolt or all four holes off of those studs.
How to remove fan drive assembly?
To remove fan drive assembly with a wrench, use 36mm or 1 7/16″ wrench (some use a 1 1/2″ wrench). You may need to whack the wrench with a hammer to break the nut loose. The fan hub can be held with channel lock pliers or you can use a 3/8″ breaker bar on the belt tensioner to tighten the belt.
How to break a fan nut?
In many cases, a drift punch and hammer are are the easiest tools to use for breaking the nut loose – place the punch on the driver side of the fan nut face and hit the punch with a hammer. When the nut has been loosened, it can be removed by hand or with a pair of channel lock pliers.
