To darken the wood I add a few drops of MinWax Red Mahogony stain (and a new addition---I also add Alkanet root that has been soaking in Mineral spirits) I apply that mixtures very thin. Wipe on wipe off. Let dry for a day or two in warm dry place. (in our kitchen oven with just the pilot light on).
Full Answer
Can you remove the stock on a Mossberg 500 shotgun?
You can quickly remove the stock on a Mossberg 500 to either reconfigure the shotgun or to simply change the stock. Pistol grips are also available for the Mossberg 500. However, before you replace the shotgun’s standard stock with a pistol grip, check your local laws to ensure that the pistol grip configuration is legal in your area.
Is the Mossberg model 500 good for deer hunting?
My only remaining concern with my made-over Model 500 is with the trigger. It came with Mossberg's LPA shotgun trigger, which offers a light, crisp, consistent pull — great for deer hunters.
What is the best grip for a Mossberg 500?
The Shockwave Raptor grip isn’t a stock, but it attaches to the rear of your Mossberg 500. I included it because it’s likely one of the best pistol grips only options for a shotgunner on a budget.
What stocks are compatible with the Mossberg 590?
Also as a quick note, to answer any questions preemptively, these stocks are all compatible with the Mossberg 500, the 590, the 590A1 and the Maverick 88 series of shotguns. 1. Shockwave Raptor Grip See, right off the bat, I’m playing fast and loose with the definition of a stock.
Why mount a scope on a receiver rail?
Because of a pump action's "loose" nature, mounting a scope on a receiver rail can lead to point of impact shift and poor overall accuracy — a barrel-mounted cantilever scope mount is much more consistent.
Who owns AimPro tactical?
After my return home later that week — deerless — a discussion with Media Direct owner Mark Sidelinger led to Michael Shane, owner of AimPro Tactical. Shane and his gunsmiths have a way with Mossbergs, born of long acquaintance with caressing them into suped-up scattergunning tools of various purpose.
Does the Winchester Model 12 have a tune up?
It would have an action tune-up. Just about every pump gun since the Winchester Model 12 has started existence with a rough-edged personality. Granted, with use they eventually smooth up nicely, but a gunsmith handy with a polishing stone can make one as slick as a hot tin roof right from the get-go.
Can you paint mag tube 1st?
If you paint the mag tube 1st then try to pass it through the mag tube ring you will ruin the paint. Same around any dovetail sights. Also if you paint the dove tail area and wedge the sight on. The paint will act like loctite. If you need to move the front sight to correct windage it will be harder.
Does JBweld come out smooth?
the jbweld came out nice and smooth, but ive done three strippings of the stocks set and I just cant get most of the stain out and off its lightened up quite a bit.
What is a Mossberg 500 shotgun?
The Mossberg 500 shotgun is one of the most popular security/tactical shotguns in use today . Mossberg also produces this line of shotguns for hunting and target purposes. You can quickly remove the stock on a Mossberg 500 to either reconfigure the shotgun or to simply change the stock.
How to check if a shotgun is unloaded?
Check that the shotgun is unloaded by placing the safety and the "on" position, pressing in the slide release (located next to the trigger housing), and opening the action by pulling back on the fore-grip.
Can you use a pistol grip on a Mossberg 500?
Pistol grips are also available for the Mossberg 500. However, before you replace the shotgun’s standard stock with a pistol grip, check your local laws to ensure that the pistol grip configuration is legal in your area.
What is the Mossberg 500?
The Mossberg 500 platform is one of the legendary American shotguns, it’s well made, dependable, and proven. There are a lot of features I could name that make the case for the Mossberg 500, but today we are going to talk about one of the most important. Maverick 88 with Folded FAB Defense Stock, Also Fits Mossberg 500/590.
What stocks are compatible with the Mossberg 500?
Also as a quick note, to answer any questions preemptively, these stocks are all compatible with the Mossberg 500, the 590, the 590A1 and the Maverick 88 series of shotguns.
What is the grip on a 12 gauge shotgun?
A normal pistol grip on a 12 gauge shotgun it is a very uncomfortable, and very harsh grip to have. The recoil from the powerful gun is sent straight back into your wrist and it’s not comfortable, to say the least. The Shockwave Raptor grip makes the force move upwards rather than rearward. Mossberg Shockwave.
How many hands does a Mossberg 500 have?
It points naturally and provides excellent one-handed control. The Mossberg 500 pump action shotgun requires two hands, but in some situations, you may be forced to utilize one hand to open a door, shield a child, or climb a tree stand.
Is the shockwave a good pistol grip?
The Shockwave is superbly comfortable, even with serious buckshot loads. Sure, it’s not as stable as a stock, but it’s a great pistol grip option when you’re on a budget. Mossberg agrees and when designing their Shockwave, they included the grip and named the weapon after it. We did a write up on the Shockwave here.
Is the shockwave raptor a stock?
See, right off the bat, I’m playing fast and loose with the definition of a stock. The Shockwave Raptor grip isn’t a stock, but it attaches to the rear of your Mossberg 500. I included it because it’s likely one of the best pistol grips only options for a shotgunner on a budget.
