- Disconnect the car electrical system or battery completely.
- Remove the fuse and connect the subwoofer with the main power supply to start with the installation process.
- Disconnect the speaker from in-built car speaker by doing mounting dock and gaining access on the rear panel of the car stereo by using wiring.
How to connect a subwoofer to a car stereo?
Do note that subwoofers can be quite energy-consuming. So, remember to connect the device to your car battery as a stable power source. After you’ve hooked it up to an amplifier, complete the wiring, and you should be well on your way to enjoy pristine sound quality over your car stereo speakers.
Where to tap into speaker wire for subwoofer?
Generally if tapping into factory wires for a subwoofer, it's best to tap into the rear speaker leads. This mainly comes into play if an aftermarket radio is installed and a high pass filter is set on the front speakers to eliminate some of the bass from the front of the vehicle and of course this would take those lower frequencies away from ...
How do you add bass to a factory stereo?
This has been the tried-and-true method of installing bass systems to factory stereos for decades. It’s just a simple little converter that ties into your speaker wires and provides RCA inputs.
Where can I get help selecting the AMP and subwoofer I Need?
If you have any questions or need help selecting the amp and subwoofer that's right for you, contact our advisors. They're available via phone and chat, and will be happy to help. Hey, I'm J.R.
Can you hook subs to a stock stereo?
Adding a subwoofer to a factory stereo is an excellent method to boost your sound while retaining your factory controls. The nifty devices can produce bass and sub-bass sounds at low frequencies. Thankfully, it's pretty simple to wire one into an existing car stereo system.
How do you hook up an amp and subs to a stock radio?
1:4515:01Level source to the amplifier. Which just so happens to be our rear speakers here one of which justMoreLevel source to the amplifier. Which just so happens to be our rear speakers here one of which just so happens to be blown folk that's for another video when we upgrade these speakers in the meantime.
Can I hook an amp to a stock radio?
Another popular way to connect an amplifier to a factory radio is to use something called a line output converter. It connects to the factory radio's speaker wires and converts the speaker-level signal to a preamp-level signal. This lets you use RCA cables to run that signal to your amplifier.
How do you hook up a RCA adapter to a stock radio?
0:126:03And it's part number pc2 so one and what that is is basically it's got speaker wires on one end withMoreAnd it's part number pc2 so one and what that is is basically it's got speaker wires on one end with an earth and RCA connectors on the other end that you can plug your RCA cables into.
Do you need a line output converter for subwoofer?
A: Yes, definitely. Amplifiers that offer speaker-level inputs don't require a separate line output converter to tap into existing speaker wires to get their signal. Many powered subwoofers offer this feature, too. The speaker-to-line level conversion is done inside the amplifier.
Do I need to bypass factory amp?
Bypassing the factory amp takes a little more work because you have to run the bypass harness to the factory amp, which is often located in some other part of the car. It's usually worth the extra effort because you'll get better sound from your new stereo, even if you're keeping those factory speakers.
How do you amplify a stock car radio?
6:228:28Positive and negative is gonna go to the driver side positive negative my two gray solid gray andMorePositive and negative is gonna go to the driver side positive negative my two gray solid gray and gray with the black stripe the one with the black stripe is the one that's negative. So positive.
How do you hook up amp to stock speakers?
10:5015:38You have the option of using a second set of rca's from the rear RCA output to the rear RCA inputMoreYou have the option of using a second set of rca's from the rear RCA output to the rear RCA input you can also just use a single set of RCA.
How do I bypass factory amp?
4:577:38Turn on from your fellow aftermarket radio to this and then run this to your fourth channelMoreTurn on from your fellow aftermarket radio to this and then run this to your fourth channel amplifier. If you want to and then just have everything nice and neat in this one little jacket.
Can you add a subwoofer to a factory amp?
So now you know – it's definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good.
How do you hook up a subwoofer without an amp?
4:306:58For this what you need to do is to connect the LFE jack in the receiver to the line in or in Jack.MoreFor this what you need to do is to connect the LFE jack in the receiver to the line in or in Jack. Available in the box of the subwoofer.
Do RCA cables go to input or output on amp?
RCA cables and speaker wire. Amp wiring kits often don't include signal wiring. Your amplifier gets its input signals from the receiver's output typically via RCA cables.
How to connect subwoofer to car?
With the speaker wires, connect the subwoofer system wiring to the amplifier. Make sure that you connect the speaker wires to the negative and positive outputs of your car’s amplifier. Route the speaker wires to where the subwoofer is located. If the amplifier is located away from the subwoofer, make sure that you run the wires under the carpeting of the car to keep it out of sight. To do this, take out the door opening’s trim panels from the floor using the trim panel removal tool. Once you are done running the wires, put the trim panels back.
Where is the remote wire on a stereo?
Once you remove the stock stereo, you will see a blue and white wire, which is basically your remote wire. This wire is located at the back of the stereo deck. Get the remote wire in your wiring kit. Once you splice it, solder this wire to the remote wire of your stock stereo.
How to hype up audio in car?
If you want to hype up the audio in your automobile, installing a subwoofer system is the best way to do it. There are different types of systems you can use to bring your car audio to the next level and holing up your car with one is easy enough if you have the proper tools and know-how.
Can you connect speaker wires to subwoofer?
You can now connect the speaker wires to the subwoofer. Make sure that the corresponding inputs in the subwoofer are paired correctly — negative to negative and positive to positive.
Why add a subwoofer to a car stereo?
Adding a subwoofer to your factory stereo is a great way to improve your sound without giving up your familiar factory controls. In this video, you can follow along as one of our experts installs an amplifier and subwoofer in a car with a factory stereo. You'll see all the basics of amplifier installation, including:
How many taps for factory speaker wire?
All right, so there's our four taps for the factory speaker wire. We'll get some aftermarket speaker wire, and we'll get those attached to the other sides here. The next thing I'm going to do is to connect our power wire we're going to use, about a foot or so, plus this blue power wire that came in the amplifier wiring kit. And last, some ground.
How many wires does Spencer use?
Spencer, he's using each positap to tap one wire each, one wire for each rear speaker signal polarity (rear right +, rear right -, rear left +, rear left -). That left/right signal feeds into the line output converter for use with the amplifier of your choice as he goes on to explain. You can find out more about line output converters in this article.
Do you run RCA cables next to power wire?
These are the RCA cables that we're going to run from the line output converter to the amplifier, and of course, we don't want to run our RCA's right next to the power wire. That's a great way to get noise introduced into your system, which you do not want.
Can Crutchfield help you pick out an amp?
So there's a great enhancement. So if you need any help picking out an amp and a sub, or any combination thereof, check out Cru tchfield give us a call we can certainly help you get the right stuff. And of course, we can help you get it installed as well.
Can you drive a subwoofer without an amp?
If you intend to drive that subwoofer without an amplifier and it's not a powered sub, that won't work. Your radio or even factory amp isn't going to be able to do it. And underpowering will be detrimental to the sub and whatever is underpowering it.
Why won't my subwoofer sound the same?
The reason is that you’re not enhancing the voltage of the stereo, and therefore aren’t giving it the proper “juice”.
What is line out converter?
A line out converter is like a hi-low converter – but on steroids.
Can a puppy work with a factory amp?
This little puppy can even work if you have a premium factory system in your car – but still want to get more bass. It takes the hi-level signals of your factory amp and drops them down to the line level that your amplifier needs – all without compromising the fidelity of the factory system.
