Tools for 8mm Mauser Cleaning
- The Hooded Sight. The best tool I know for removing the hood over the sight is a snap ring pliers set to widen the tines when the handles ...
- Routine Disassembly. Since I am using this Instructable to show special tools I use, I will not give attention to several steps that are part of the disassembly.
- Floor Plate Release. ...
- The Spanner Wrench. ...
Full Answer
How do you clean gun stocks with Murphy's Oil Soap?
Clean gun stocks with a diluted solution of Murphy's oil soap and a damp cloth to restore the luster of the wood, and to remove dirt and grime from the field. Prepare a solution of three parts Murphy's Oil Soap to one part water. About one cup is all that is needed to clean the stocks on several guns.
Why clean a Mauser rifle?
A Mauser rifle is a classic piece of military history and needs to be cleaned on a regular basis to be preserved. Mauser was a German manufacturer of arms that supplied the country with weapons for over 120 years. The most iconic of these weapons is the Mauser 98k bolt-action rifle.
How do you clean a brass JAG?
Attach the brass jag to the cleaning rod. Soak a cotton pad in cleaning solvent and attach it to the end of the jag. Insert the rod into the breech and push the rod through. Remove the patch and remove the rod. Attach a clean cotton patch to the rod and push it through the barrel from the breech. Repeat this process until the patch comes out clean.
How do you clean the stock of a car?
Rub a light coat of quality wax into all surfaces of the stock, and allow the wax to set for about half an hour. Buff and shine the wax from the stocks with a clean, dry cloth. James Clark began his career in 1985.
What to clean Wood Gun stock with?
0:146:25My New Favorite Way to Clean Gunstocks - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then like like the gun stock kind of impacts it and it kind of rubs off on it. This magic eraserMoreAnd then like like the gun stock kind of impacts it and it kind of rubs off on it. This magic eraser is actually really good for removing that.
Can you use Murphy's Oil Soap on gun stocks?
Items you will need Prepare a solution of three parts Murphy's Oil Soap to one part water. About one cup is all that is needed to clean the stocks on several guns. Dip a clean cloth in the solution until it is damp, not sopping, and wipe down the length of the stock, the grip and any other wooden parts on the gun.
What is the best oil to use on a gun stock?
Tru-Oil® Gun Stock Finish has been the professional's choice for gun stock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age.
Can you clean a gun with vinegar?
1. White vinegar/hydrogen peroxide cleaning solvent. When lead and other metal buildup becomes an issue, mixing up a 50-50 concoction of both white vinegar and hydrogen peroxide will cut right through. Soaking overnight will cause the metal to flake off.
Should you put gun oil in the barrel?
Improper care of your rifle, shotgun, pistol, or other firearms may result in it malfunctioning and/or rusting. While cleaning the outside of a gun is routine knowledge among gun owners, you're not alone in asking, “Should I oil the inside of my gun barrel?” The answer is, yes, but make sure you're doing it correctly.
Should I oil my gun stock?
It is important to clean your shotgun after each use to remove any moisture, unburnt powder or dirt. Gun oil should be used sparingly as excess oil or cleaner can damage the stock.
Is linseed oil good for gun stocks?
Boiled linseed oil is more often used on bare wood and is popular for finishing gun stocks, as the process of heating it decreases its drying time. When hand rubbed into wood, it creates a durable weatherproof seal and the heat produced from the friction of rubbing produces a deep, polished finish.
Can I use WD40 to clean my gun?
Since WD-40 is primarily a solvent it seems to make sense that it would be ideal for cleaning guns. However, cleaning your guns with WD40 is NOT advisable. Solvents, such as WD40, don't remove any gunk or slime. Solvents dissolve gunk, which then moves the dissolved goo to another area of your gun that you cannot see.
What household items can I use to clean my gun?
From your bathroom, you need a bottle of hydrogen peroxide. That's it. Two simple, everyday household products that when mixed together in a 50/50 solution will eat away metal deposits in your gun, clean burned particles of metal and gunpowder that stain your gun's innards, and make the outside portions shine like new.
What oil can I use to clean my gun?
Break-Free CLP is the standard for gun oils. It helps you clean your firearm, it lubricates your gun, and it helps to protect it from rust.
Step 1: The Hooded Sight
The best tool I know for removing the hood over the sight is a snap ring pliers set to widen the tines when the handles are squeezed. This spreads the sight hood enough to remove it from the sight easily.
Step 2: Routine Disassembly
Since I am using this Instructable to show special tools I use, I will not give attention to several steps that are part of the disassembly. Anyone wanting a step-by-step guide to the disassembly of a Mauser rifle should follow the steps in this link. (The photo shows removal of the front barrel band.)
Step 3: Floor Plate Release
A punch or a pin is needed to press the release pin on the floor plate. The floor plate forms the bottom or floor of the ammunition magazine. The spanner wrench (See the yellow text boxes.) will be used in a later step. See the second photo to view how the pin portion of the tool is used.
Step 4: The Spanner Wrench
The photo shows the spanner wrench section of the tool used earlier to remove the floor plate. I drilled two holes in a piece of 1/8 x 1/2 inch strap iron. They are the same distance apart from each other as the indentations in the special nut on the bolt running across the rifle stock's width. The second photo shows the spanner wrench in use.
Step 5: Cleaning Up After Corrosive Primers
I have some military surplus 8mm ammunition from the days of corrosive primers. The recommendation is that the barrel be cleaned with hot soapy water to remove the corrosive elements. I bought a piece of 2 inch PVC pipe and an end cap. I cemented the end cap on one end of the PVC and cut it to 29 inches.
Step 6: Disassembly of the Bolt
Periodically it is good to disassemble the bolt to clean any powder residue from inside it or to lubricate internal parts. The bolt includes a very strong spring. There is very little space on the bolt for one's fingers to pull it down and hold it while turning the safety to release the bolt parts.
ewallover
So I've gone and done it! I won a GunBroker auction on a National Postal Meter 1943 M1 Carbine. In the photos the rifle looks pretty darn good. I know there are going to be dents and dings, but those honorable marks are a part of the firearm's history. I have been told that simple green will remove a great deal of crud and grime.
hzhardy
I wraped my m1 garand stock tightly in a towel and placed in a trash bag on the dash of my truck for a few days so the old towel wicked the old oil and cosmoline out.
ewallover
Wood-water? Um, I need to sleep on this... one major consideration would be my wife and her dishwasher...I don't think so....
Gmountain
The simple green won't hurt. The rinse with water let it dry. Then blo.I've done 5 m1 carbine stocks this way.
ewallover
Ok G, you've convinced me. Did you clean the inside of the stocks also or just the exposed exterior surfaces? I really do not want to raise the grain around the stamps and cartouche. From the photos, they are not well defined.
hzhardy
Wood-water? Um, I need to sleep on this... one major consideration would be my wife and her dishwasher...I don't think so....
Gmountain
Inside and out. Don't forget, these stocks have seen plenty of rain and snow
