how to camo a rifle stock

^{Camo Your Firearm}

1. Step 1: Diassemble Gun Action From Stock and Clean! Carefully remove the screws holding the gun action into the stock and separate the action and stock.
2. Step 2: Tape Everything You DON'T Want Painted! Taping the gun parts we don't want painted is going to take a bit of time, but time spent here ...
3. Step 3: Base Coat. Using the lightest color as the base coat brings the entire gun to the basic color of the natural background where it will be ...
4. Step 4: Reassemble Gun and Make It Ready for the Camo. Remember the paint will be somewhat soft yet, so be careful and take your time. ...
Step 5; CAMO. To camo paint we must apply paint in a way that will break up the horizontal line of the gun against the background, and have ...
Step 6: Clear Coat. Upon completing the last coat of camo color, let it dry and take time to look it over carefully. ...
Step 7: Before and After, (or How'd You Do?)

Full Answer

How do I clean the stock of my rifle?

To get started, remove barrels, actions, and sling swivels from the stocks. Lightly sand the stocks with 220-grit sandpaper and wipe them clean with denatured alcohol or acetone.

Is there such a thing as the wrong Camo job?

There’s no such thing as a “wrong” camo job unless you apply snow camo to a rifle destined for the tropics. Get the best of American Rifleman delivered to your inbox.

What should I look for in a rifle kit?

Let’s start by identifying all the different pieces that Mossy Oak Graphics provides in your kit. Included in your rifle kit should be a piece of camo vinyl for the barrel, two pieces for your forend, two pieces for the stock, and a piece for the receiver.

What is camouflage paint and how does it work?

The main thing to keep in mind is that the purpose of camouflage is to break up an object’s shape. Blending into the surroundings is a matter of color primarily, but breaking up shape is a matter of highlights and shadows, or light and dark coloration. Your color choices are limited by what’s available in spray paint.

How do snipers camouflage their guns?

Using the same principles of camouflage, snipers wrap their rifles in canvas and create little sleeves that make them blend into the environment. Soldiers are trained to keep their eyes peeled for strange things in their surroundings that could represent a threat.

Can you Cerakote synthetic stock?

Can you Cerakote a synthetic stock? Yes you can! Or anything polymer/ plastic that can be prepped and cleaned properly without damaging the material. An example of this would be any plastic, polymer, or rubber that is soft or too flexible for the coating to fully harden and remain durable.

Can you paint a synthetic rifle stock?

Guns nowadays are composed of synthetic stocks because of their properties, affordability, etc. Painting your rifle stock to your liking is however an easy way to customize it. Particularly good for synthetic stocks are epoxy coated primers and paints.

Can you paint a wood gun stock?

Paint the stock with your chosen color, or colors. If working for a camouflage scheme, start with a base coat of khaki or almond or olive drab and then move to your darkest color and work your way to the lightest. For every layer or coat you do, allow 24 hours of drying in between to let the paint adhere to the stock.

What does Cerakote stick to?

Cerakote is a ceramic based finish that can be applied to metals, plastics, polymers and wood.

Can you Cerakote a rifle?

The purchaser can either get Cerakote guns from manufacturers - many of whom apply the finish at the factory - or apply it at home (or have a gunsmith do it) as an aftermarket upgrade. Manufacturers typically offer Cerakote finishes in some sort of tactical tan or green color, though many more finishes are available.

What kind of paint do you use on a gun stock?

Guns should always use the Krylon ColorMaster Paint and Primer because they offer a classic, smokey finish.

Can you sand a synthetic stock?

0:234:52How to Sand a Rifle Stock Presented by Larry Potterfield - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's important to follow the sanding chart included in the Myles Gilbert stock finishing kit as itMoreIt's important to follow the sanding chart included in the Myles Gilbert stock finishing kit as it provides a systematic process that helps prevent skipping over any areas of the stock.

What kind of paint is used for guns?

What Kind Of Paint Can I Use To Paint A Gun?PRODUCTPRICERust-Oleum 269038Fast Drying$$Brownells Aluma-Hyde IIEasy to apply$$Duracoat Aerosol KitNo baking required$$$Dupli-Color EDE161307Durable ceramic formulation$Nov 30, 2021

How to secure camo vinyl on a rifle?

Use pressure with your fingers to secure the camo vinyl on your rifle. In doing this you will notice the piece where your sling would hook up – identify where that piece is and make a small slit on either side of it. The material will wrap right around it. Now for the round end of your forend.

How to get backing off a rifle?

Before pulling the backing off you will want to hold your forend piece over your rifle and try to measure allowing yourself about ½ inch on either end. Then trim that piece off to length. Now you can pull the backing off and apply it to the left side of your forend.

What is included in Mossy Oak Graphics rifle kit?

Included in your rifle kit should be a piece of camo vinyl for the barrel, two pieces for your forend, two pieces for the stock, and a piece for the receiver.

How to clean a rifle barrel?

Prep Step 1: Using a little bit of isopropyl alcohol on a clean rag or paper towel, clean your rifle thoroughly. Make sure to clean where the barrel meets the forearm and in any other recessed areas. Cleaning all of the oil off helps to ensure that the adhesive vinyl will stick to your rifle.

How to get a heat gun to conform to curves?

On to the curves. You’re going to want to get that heat gun ready. By applying heat to the material you can get it to conform to every curve. Once you start heating up the material you will notice it starts to soften and then you can use your fingers to press it down into those curves.

How to get rid of a forcing cone?

Use your heat gun to apply a little heat where the forcing cone is.

Where to put forend piece on rifle?

Remove the bolt out of your gun and then use the same process as above to install the forend piece on the right side of your rifle.

What is camo form?

In addition to concealment, Camo Form improves grip, reduces noise, and protects hands from hot or cold surfaces. Since it conforms to virtually any shape, Camo Form can be used to camouflage other gear including flashlights, hatchet and knife handles, scopes, and tree stands.

How to clean camo form?

1. Wash Camo Form by hand with soap and warm water. 2. Rinse thoroughly and air dry completely. 3. Store in a cool, dry place before reusing.

What is a camouflage wrap?

Whether on a hunt or a mission, it’s the camouflage wrap that keeps guns and gear concealed, protected, and ready for action.

How long does it take to wrap a rifle?

Estimated Time: 10-15 minutes. 1. Start at either end of the rifle and work towards the middle. Wrap the Camo Form around itself one time from the tip of the rifle’s barrel or at the bottom of the stock. Do not use Camo Form to wrap moveable parts of the firearm (e.g., the bolt, safety lever, or trigger). 2.

How long does it take to remove a camo form?

1 Roll of Camo Form. Scissors. Gloves (optional) Estimated Time: 10-15 minutes.

Do you have to wear gloves when handling camo form?

Pro Tip: If you are sensitive or allergic to natural rubber latex, be sure to wear gloves when handling Camo Form.

Can you use camo wrap on a shotgun?

But painting firearms can be messy and permanent. Instead, use Camo Form Reusable Fabric Wrap to camouflage rifles, shotguns, bows, and other outdoor gear in minutes. It is a self-adhering, elastic wrap that won’t leave a sticky residue when removed. Read on to learn how to properly use it on rifles and shotguns.

What to do if your rifle looks like a bad Picasso dream?

If you’re finished and your rifle looks like a bad Picasso dream, no worries. Let it dry and start over! There’s no such thing as a “wrong” camo job unless you apply snow camo to a rifle destined for the tropics.

What is the purpose of camouflage?

The main thing to keep in mind is that the purpose of camouflage is to break up an object’s shape. Blending into the surroundings is a matter of color primarily, but breaking up shape is a matter of highlights and shadows, or light and dark coloration. Your color choices are limited by what’s available in spray paint.

What is an overlay on a rifle?

An overlay is an object—a leaf, net or branch—that you hold over your rifle, perhaps 6 to 10 inches away, and spray “over” the blocking item to create an overlay effect. Basically, the overlay is a reverse pattern—the paint goes where the overlay isn’t.

How do I paint a gun?

Like any painting job, the first thing is prep. Make sure the gun is clean and free of oil. Then, you need a roll of “blue tape” (masking tape made for painters that lifts off easily) available at any hardware store in the paint section. Tear off pieces of blue tape to cover whatever you don’t want painted. Remove the bolt. Tape it off. Your option whether to tape the bolt handle or not—I’ve done it both ways. Cover the ejection port where the bolt sits with blue tape. I often have to use several small pieces of tape to cover the “hole,” paying special attention to the chamber.

What color camo do you use for a third color?

A third color is to be approached carefully. It’s really easy to over-do the camo if you get wild and crazy with a third color. I like to use the “primer red” color as a third color, but very, very judiciously.

What are the rules for gun painting?

Gun Painting “Rules”. The first rule is that there aren’t any rules. There are, however, some guidelines. The main thing to keep in mind is that the purpose of camouflage is to break up an object’s shape.

What color base coat should I use for a hunter?

Remembering the maxim, “Less is more,” apply a nice even base coat of whatever color predominates in the region you plan to hunt. Brown and green are the usual base colors. I don’t bother with two coats because I’m going to add more paint anyway with the next step.

How to clean camo before installation?

The first step in any successful application is cleaning your camo project before Installation. For a Rifle Kit wrap, the day before application, the Rifle should be field stripped and cleaned thoroughly on all areas the camo will be applied. Making sure that no residue is on the surfaces. Complete this process using a solvent ...

What is a rifle kit?

The Rifle kit in your favorite camo is a unique and affordable way to personalize your firearm. Made from our "No Glare", fade resistant material. Your firearm will not only match your hunting environment but will be protected from the elements, giving you lasting peace of mind. Kit includes (4) pre-cut pieces that conform easily to the curves of your barrel, forend, & stock. Matte Finish.

How long does it take to return Camowraps?

However, if you are unsatisfied with your purchase, you can exchange or return your undamaged, uninstalled graphic within 90 days of delivery. After 30 days of delivery, products will be subject to a restocking fee.

How to camo paint a gun?

To camo paint we must apply paint in a way that will break up the horizontal line of the gun against the background, and have vertical elements that shift the shape of the gun from a flat line that is horizontal, to zones of vertical structure. These shift the image of the gun to just another blur on the background with the more natural vertical lines seen in nature. (to do this we use the artificial plants and grasses and dried plants to act as a sort of pattern in which we shape the paint areas into vertical and nearly vertical lines.)

How to clean a gun action?

Step 1: Step 1: Diassemble Gun Action From Stock and Clean! Carefully remove the screws holding the gun action into the stock and separate the action and stock. Remove the bolt of the gun (if it has one), and set it aside. Tape up the bolt channel.

What kind of paint do I use for camo?

Take a few pictures of the area, and use them to sort out the plethora of paints available to find those that fill your need. I tend to use Rustoleum paints, mostly in the 'camo' paints of which they make four seriously good ones. These are: Earth Brown, Deep Forest Green, Army Green, and Khaki.

How to prevent fingerprints from being transferred back onto the stock and action?

Wear the latex gloves to prevent your fingerprints from being transferred back onto the stock and action so the paint will stick. DO NOT spray the gun directly, as the degreaser will go into every tiny crevice , and it will ruin the paint job right from the start!

How to keep paint off of scope lens?

For the scope lens, place a simple cotton ball in the lens opening and then use the painters tape to seal off the ends of the scope to keep paint off the lenses. This is critical, take your time and do it right, paint can affect, if not ruin the coatings on the lens.

How to see how a gun looks from a distance?

Look at the gun up close, and then set the gun across the room and see how it looks from a distance. What you want to see is that the vertical lines and shapes are visible, and that they break up the shape of the gun. If you like the results fine, but if not...now is the time to make changes!

How to make a gun disappear in landscape?

To make your firearm disappear into the landscape, you have to apply some thought to the painting of your gun. Normally, a rifle presents a long horizontal line, usually dark and stark that highlights it all too well. So in order to hide the shape of the gun, and break up the outline, and metallic surface so it fades into the background, ...