To craft a rifle stock, a gunsmith uses knowledge of engineering, design, and artistry. The process involves inletting the action, cutting off the excess wood, sculpting the rest of the wood stock by hand, and finishing the stock with wood oil or laminate.
Full Answer
How do gunsmiths make rifle stocks?
To craft a rifle stock, a gunsmith uses knowledge of engineering, design, and artistry. The process involves inletting the action, cutting off the excess wood, sculpting the rest of the wood stock by hand, and finishing the stock with wood oil or laminate.
How to choose the best rifle stock for your gun?
The best choice might be to get a partially finished blank that you only have to inlet the action for your specific gun. Talk to a gunstock associate to see which blank stocks are the best fit for your gun. It is high labor, time, and skill-intensive task to complete a rifle stock from scratch.
What is the best 22 LR conversion for You?
One of the leaders of high quality 22 LR conversions has been CMMG, which has created an updated design that is more reliable, more user-friendly, and offers more available optional features such as forward assist and last shot bolt hold open.
How much does it cost to build a 10/22 rifle?
If a high-end, competition-grade build is not your cup of tea, there are other ways to conduct a build together. Break down a new off-the-rack rifle. Basic factory models have suggested retail prices from $309 to $399. Or, rescue a used 10/22 from a local dealer.
The Build
The general build specs of a dedicated AR15 22 LR upper are very similar to those of any other AR15 upper build. Actually, all the components are the same except for the dedicated barrel, barrel collar, and bolt assembly plus you can omit a few parts.
Fit, Finish, Feel, Features, and Functionality
The quality, fit, and finish of the CMMG bolt is excellent. I previously tested an ATI Chiappa upper and there is zero comparison between the low-end ATI quality and CMMG’s. The CMMG design is a huge upgrade.
Final Thoughts
There are some teething pains and a pretty long break-in process for one of these builds, but I don’t think anyone will complain too much. In some ways I had these same issues with custom 10/22 builds. My custom Kidd 10/22 rifle is just now finally humming along after about 2000+ rounds.
Lower Specs
We were unable to load Disqus. If you are a moderator please see our troubleshooting guide.
What is the diameter of a 10/22 bull barrel?
Some barrels are threaded for muzzle accessories while others are not. A 10/22 bull barrel usually has a consistent 0.920" diameter from the receiver to the muzzle. The purpose of this thicker profile is to reduce barrel flex under recoil for increased accuracy.
How many parts are in a bolt assembly?
The bolt assembly, trigger group and stock assembly are usually self-contained, modular units. Of course, these units can be broken down (the bolt contains seven parts and the trigger group around 27, depending on the make) and may need to be dismantled at some point in the future for repairs.
What is a 10/22 bolt stop pin?
The 10/22 requires two steel receiver pins, a bolt-stop pin, and a takedown screw. The receiver pins secure and support the trigger group housing. The bolt stop rests in between the rear interior portion of the receiver and the bolt assembly.
How many rounds does a Ruger BX 25 hold?
Ruger finally began offering in-house BX-15 and BX-25 extended magazines a few years ago that hold 15 or 25 rounds. Ruger's original BX-10 rotary 10-round magazine fits flush to the stock and is available with either a black or transparent housing.
Can you build a 10/22 with a friend?
Building a 10/22 with a friend or family member is something both of you will remember for years to come. If a high-end, competition-grade build is not your cup of tea, there are other ways to conduct a build together. Break down a new off-the-rack rifle.
How to finish a rifle stock?
This involves sanding, whiskering, and applying an oil finish. Start by sanding the unfinished stock with 80-grit sandpaper, by wrapping the sandpaper around a solid wood block and rubbing back-and-forth in the same direction as the wood grain.
Why do you need a custom rifle stock?
Gunsmithing a custom rifle stock is a great way to personalize and upgrade the quality of a firearm. And it is a great way to start learning about how to design and build guns. And, for any firearms with suitable action, but a plastic stock, smithing your rifle stock from scratch is a great way to enhance the quality of your shooting experience.
What is a gunsmith?
Gunsmithing your custom rifle stock from a blank is a do-it-yourself (DI Y) project that is extremely rewarding and enhances the experience of shooting. To craft a rifle stock, a gunsmith uses knowledge of engineering, design, and artistry. The process involves inletting the action, cutting off the excess wood, sculpting the rest ...
What is a wood stock blank?
Finding and Choosing a Hardwood Stock Blank. A gunstock begins as a hardwood blank. A blank is just a block of hardwood that is ready to be customized for a firearm. But, the usable wood must first be milled from timbers. The most popular types of hardwood for rifle stocks are black or claro walnut and maple heartwood.
How to sand a stock?
Start by sanding the unfinished stock with 80-grit sandpaper, by wrapping the sandpaper around a solid wood block and rubbing back-and-forth in the same direction as the wood grain. Wet a clean rag with distilled water and use it to remove the excess dust from sanding.
What is shaping a rifle stock?
The process of shaping your rifle stock is, by far, the most meticulous and technically demanding. It is also the stage that shows the most dramatic change in your stock. With the right skills, tools, and dedication, you can see your rifle transform from a piece of wood into a purpose-built piece of craftsmanship.
What wood is used for rifle stock?
The most popular types of hardwood for rifle stocks are black or claro walnut and maple heartwood. Walnut and maple are among the densest hardwood species, which provide the durability required to support the action of the firearm. With access to walnut or maple timbers, you can square the log by cutting off the sapwood with a chainsaw, ...
Why Build a .22 LR AR?
My goal was quite simple. I had the itch to slap parts together, and I wanted something I could have fun with during this ammo drought.
The Guts of the Gun
The guts of the gun consist of the very cool and handy CMMG .22 ARC kit.
That Funky Polymer Lower
Are polymer lowers the future? Can ARs take the Glock route and trim weight and cost by using polymer?
Brace Yourself
No buffer meant I could use a skeletonized folding brace if I so choose. Well, unsurprisingly, that’s what I chose.
Optic and Mount
There are no iron sights on the Uber Tactical .22. Iron sights would add at least +2 drag and minus .5 cool points .
Conclusion
Since building the Uber Tactical .22 LR AR, I’ve shot close to 1,000 rounds. Minimal recoil, low concussion, and cheap ammo make it a favorite for plinking and learning to shoot.
